Maple Hacks

[SunBeam]

** This thread is dedicated to these 3 clients of MapleStory : MapleGlobal, MapleSea, MapleJapan **

Posted all the hacks I can do, and can afford to post ;) [there's more than this, but these are the most used]. Also don't ask for a bypass [not even in PMs], ok ? That will be ignored...

Also, I won't be updating this [too much inactivity], so make sure you take the necessary precautions as to backup code or w/e in pictures, so that you can do this for later versions...

** For all MapleStory clients, the same drill : use the kernel debugger [normal breakpoints are being hooked and you will get DC]

SunBeam, out...


MapleGlobal v0.14
-------------------

1. God Mode :

- this is only for monsters that don't use magic/throw weapons; people notified me about getting hit by bananas or w/e...

In CE, make sure you target MapleStory.exe, then open up Memory view and go to : 596D80 [in the top part of MV, the code one]. Once here, right-click the instruction and choose "Change register at this address". In the pop-up that appears, tick the ZF one time. D0ne !

2. Character Coordinates :

In CE, click "Add address manually" :

* tick "Pointer"
* in the "Address of pointer" field input : 68199C
* in the "Offset(Hex)" field input : 234

And label it "X Coordinate". Repeat the same process for the "Y Coordinate", only this time input offset will be 238. D0ne!

3. Wall VAC :

Same drill as above :

* "Address of pointer" : 6810A0
* left wall offset : 4
* right wall offset : C

Now since you have the player coordinates, simply change both left and right wall addresses to the X Coordinate's value. Clean up the map, then watch how all the monsters warp to your current X position...


MapleSea v0.21
-----------------

1. God Mode :

* same drill as for MapleGlobal
* address to go to in Memory view : 5D163E

2. Character Coordinates :

Same drill :

* "Address of pointer" : 6CC888
* X coordinate offset: 564
* Y coordinate offset : 568

3. Wall VAC :

Same drill as above :

* "Address of pointer" : 6CBEF0
* left wall offset : 4
* right wall offset : C


MapleJapan v0.99
-------------------

1. God Mode :

* same drill as for MapleGlobal
* address to go to in Memory view : 5E2C97

- this one is for both Melee/Magic attack...

In CE, make sure you target MapleStory.exe, then open up Memory view and go to : 5E867D [in the top part of MV, the code one]. Once here, right-click the instruction and choose "Change register at this address". In the pop-up that appears, tick the ZF one time. D0ne ! [thanks for the heads-up, DupeEx]

2. Character Coordinates :

Same drill :

* "Address of pointer" : 6E12F4
* X coordinate offset: 320
* Y coordinate offset : 324

3. Wall VAC :

Same drill as above :

* "Address of pointer" : 6E0A30
* left wall offset : 4
* right wall offset : C

P.S. : All addresses/pointers are on 4 bytes...

Final words : my work here is d0ne; make backups of the code and have a merry X-Mass ;) !

[sharr]

weee ;)


as for ever Great work ;)

[turbo-pascal]

if you posting hacks you need to post bypass you know...

[SunBeam]

That's why I am posting them ;) Hope they add nProtect to Sea and Japan ;)...

[xxvi3txbo1xx]

so freeking hard to find bypass .but so easy to find hacks.....ty sunbeam anyways = 0

[ViperRebel]

Hope they add nProtect to Sea and Japan ...

JMS:
Doesnt even have a report function (i believe either kms or cms just got it though, so it may be migrating to jms)
Makes at least 50x as much money as OMS (everyone uses cash shop, everyone)
Doesnt complicate software for the user
Doesnt impede the users with anti-cheat that is strict (note: process guard isnt detected, and it has been out for how long? and they havent even added that to their detections, they wont block software with legitamite purposes)
Users get to ban hackers themselves using lie detector items


jms has never, and will never, get nProtect

[halire]

if you posting hacks you need to post bypass you know...

No he doesn't. Figure it out your self like most people do and stop leeching, you are lucky that he even posted what he did. Nprotect isn't as hard as most people would like to believe.

[oefman]

Hi Sunbeam nice work,
i got 1 question , wat ip's gameguard use for its update?

[Rain]

JMS:
Doesnt even have a report function (i believe either kms or cms just got it though, so it may be migrating to jms)
Makes at least 50x as much money as OMS (everyone uses cash shop, everyone)
Doesnt complicate software for the user
Doesnt impede the users with anti-cheat that is strict (note: process guard isnt detected, and it has been out for how long? and they havent even added that to their detections, they wont block software with legitamite purposes)
Users get to ban hackers themselves using lie detector items


jms has never, and will never, get nProtect


thats a bold statement hope its true ;)

[newking]

I heard about the lie detector item and It's probably usefull for people against hackers. :/

[chimpinzo]

God-Mode : 596D80 - use any bypassed CE with working kernel debugger and change ZF flag from 1 to 0 [tick ZF flag 1 time]

Character Coordinates : pointer - 68199C; X offset : +234; Y offset : +238

Wall VAC : pointer - 6810A0; left wall offset : +4; right wall offset : +C

how did you get those values? just wondering so i can know how they work,
character coordinates, same way as finding the X / Y vac i guesss.
wall vac, tracking a monster and using increasing/decreasing value, but how about godmode?

[slslasher]

tis god mode for maple sea is onli for body contact izit?coz when the mob use magical atk i was hit.

[salvatore]

lol sunbeam, the godmode wont work :) its dc XD

Wall VAC : pointer - 6810A0; left wall offset : +4; right wall offset : +C


lol sunbeam, i found the value already it shows -173
wat do i have to change the value o_O
i put random value and it wont works lol

[alcahest]

LOL, the god more for MSEA works beautifully.
thou it works but actually im more interested in how u found the address. Isn't it more efficient if we can try to find it ourselves ??
I personally read thru sunbeam's tutorial and found jump hack and uber vac address, but still dun have any idea how to go about searching for god mode.
It will be much easier if someone could explain the logic behind finding god mode address.

[alamakz]

my maple closes when i attach the process to it. can any1 help me with this?

[chua_ahbeng]

The Msea god-mode is not similar to the last one...u still get dmg from cerebrus or yeti earthquake and from high falls, so i want to ask, is the method of searching for this god-mode address similar to the old one? or is this the "dark-sight" god-mode?

[holytupac]

Last question, i understand that for jumping values you search for the value 2000, while for misshack, its 99999, is misshack=godmode? so using the value from our friendly neighbour sunbeam ;) we'll have to search outfor 99999, if godmode is a diff search value, what is it? sry for the noob question, i kinda missed out on the value

[alcahest]

i guess this address only works for body contact, we would still need another address for those "magic attacks" that includes earth quakes etc etc.. if only we know the way to search for sunbeam's god mode address, we could eventually do our own search for whatever type of god mode that we want..

chua_ahbeng, whats the old method u talking about, care to share ?

holytupac, seems that sunbeam's god mode is not miss hack and the searching of 99999 for miss hack does not work anymore. damage would still be deducted.

[salvatore]

LOL people

to find godmode=easy

the value is 01XXXXXXXX
u use that to search the hacks and find with 005XXX with jne :)

[holytupac]

Wow thx for the fast reply alchest, i see, guess ill be doing some searches on the magic attack value, btw could i get the search value for body contact? If its private, and you dont wanna waste your effort, its alright ill search it out myself.

[lalaman2002]

LOL people

to find godmode=easy

the value is 01XXXXXXXX
u use that to search the hacks and find with 005XXX with jne :)

for msea tha value is 04xxxxxxx (4 bytes)

[alcahest]

yes, lalaman2002. in the first place how do i find out wats the value ?? what to scan for ?? when damage taken ?? or ??

[Haku]

for msea tha value is 04xxxxxxx (4 bytes)

what's da value fo jms..?

[lalaman2002]

what's da value fo jms..?

i dont play jms sry dude...

[Haku]

cant i tick zf...the pointer doesnt change into a hand..

[SunBeam]

wow sunbeam.. your too nice... downloading msea and jms to do hacks for these guys that dont even know how to use it without a trainer.. ;oI'm making a gift for x-mass for the mass. That's the last I'm going to do...oh, and the god-mode tut :)...

Also :

@salvatore : god-mode doesn't DC; i specifically said - use the kernel debugger !!!

* this is the JNE god-mode; i haven't tested it for magic attack, but works passing throuhg monsters, doesn't it ?...pfff...

* back to work; posting VAC and coords for MSea; lots to dl for JMS :( abt 65% [darn ISP I got]...

[aquaboy007]

well, i have a bypassed CE which does not have the memory editor or the zero flag, so how do i do this? the ce which i have i think is the lite version. can i just freeze a value like 0 or 1 instead of the zf?'

*offtopic* sunbeam, are you by chance in the extalia forums, i remember seeing someone by that name*offtopic*

[SunBeam]

@aquaboy: yes, am an Extalia releaser

All updates will be on main page; first post..So be on the look-out - 20% of JMS...

I need a MSea account. I can't do the hack gathering in MapleIsland...geez...

[cos]

most people hack jms, not much hackers in msea. because jms just has a bunch of better features. mmuch more advanced. msea is just like oms. both with poor cashshop items -_-. dont even got expc ards yet. zz. oh and please, msea, oms pets, rudolph? come on its looks like a fckin giraph, so ugly. they should at least make something nice looking for christmas. -_-

[SunBeam]

Thanks clown89 ;). I will post the VAC and coordinates then...

[clown89]

my msn is tonyhawk_47@hotmail.com

add me to get the account info..

however i will be away from holiday in abt 3 hrs time..will only be back after christmas..

[lynn2secsie]

yo aquaboy007 i kno how to solve ur prolblem to force MS to show on the processes tab talk to me on aim

[xiaoOoaix]

Unlimited Attack : pointer - 6CC84C; offset : +C88 [this is for hand attack - fighters, thieves, swords, daggers etc...; not mages - as I've been notified]


erm.. offset means ?? where can i find it

[lynn2secsie]

open CE
select msea
add address manually
check pointer
in first box [pointer] put in 6CC84C
in second box [offset] +C88
click ok

[SnakeLegend]

you need a bypasser for this right.

[DrUnKeN_TeA]

only for oMS i believe

[lynn2secsie]

you do need a way to bypass np but and suspend it long enough for u to select it as process i think cause gg hides ms from being detected

im just guessing....maybe wrong lol sry if it is =(

ive used jamilah+zone alarm+process explorer but still cant seem to bypass gg....longest time ive been the same lvl since i havent been playin lolz. been really interested in trying to learn how to bypass np for a while. ive gotten ummmm pretty much no where but im still workin my ass off when i have time to get on cpu. any one wanna help me =P really appreciated

[zxczxczxc]

can someone teach me how to run the godmode and others togther...
i can't seems to run godmode and my speed hack toghter...1 will not work..

[lollol99]

make a pointer for your speed hack then

[aquaboy007]

you do need a way to bypass np but and suspend it long enough for u to select it as process i think cause gg hides ms from being detected

im just guessing....maybe wrong lol sry if it is =(

ive used jamilah+zone alarm+process explorer but still cant seem to bypass gg....longest time ive been the same lvl since i havent been playin lolz. been really interested in trying to learn how to bypass np for a while. ive gotten ummmm pretty much no where but im still workin my ass off when i have time to get on cpu. any one wanna help me =P really appreciated

first of all, jamilah doesnt work. second of all, your guess is correct. third of all, you dont need to bypass gg with external tools, just a patched CE will do.
google, you'll find it. its everywhere.

hint: MS is not the only one which uses GG.

[lynn2secsie]

hey aqua did u use moose injector w/ gbr helper?

[strikeboy]

hmm have anyone found the vac for client side ? i have got the godmode already...

thx sunbeam and ya guys too

[salvatore]

[QUOTE=SunBeam]I'm making a gift for x-mass for the mass. That's the last I'm going to do...oh, and the god-mode tut :)...

Also :

@salvatore : god-mode doesn't DC; i specifically said - use the kernel debugger !!!


LOL, i`m preety sure 100% it will dc u -.- u cant even debug and yes i use kenal debugger!!. how come u are not on aim? go on aim and i teach u how to open cheat engine while in ms and u do the godmode XD
Bet it doesnt work XD

[SunBeam]

salvatore, why the f*** do you think I post these ? Cuz they don't work ? D'oh s2pidity...

Do this, you arse :

* In extra tick :

- Undo memory modifications
- Make memory writeable
- Use kernel debugger
- Kernel stealth

* Also, use THE OFFICIAL CE, not any bypassed crap that doesn't have any working debug funtionality

OK ?

[lalaman2002]

salvatore, it works the god mode for msea...perfectly i can vouch for that.

[salvatore]

salvatore, it works the god mode for msea...perfectly i can vouch for that.


i`m talking oms :P mot msea

[aquaboy007]

@lynn
what is the moose injector? i told you i used a patched CE

@SunBeam
How do you apply this hack anyway? i used Zonealarm pro to stop and suspend the process at every stage of MS execution. they are:

1.GG tries to modify hosts
2.GG launcher accesses net
3.GameMon reads and modifies physical memory
4.Maplestory.exe accesses net
5.MS monitors mouse and keyboard
6.The game loads

so i thought that the best bet is to do the god mode hack before step 4. i did it, but got a GG error 500. then i tried it before every step mentioned here, but it fails,i get error 500 " gg initialization error, send all erl files to us". so when the heck do i hack anyway(it rhymes)?

[SunBeam]

Oki doki. Installed JMS finally, and now I need a noob account with a char that isn't in Maple Island...support plz...

[VilleneuveJr]

You can have my bro's char, an lvl 31 spearman but without any equips because i stole them :P

anyway if you want it pm me, i can support it with some money and stuff if you want ;)

[newking]

Ifeel like downloading JMS again myself, with all the values ppl in here are sharing. :|

Sorry for double posting but would you really trust someone that took their own brother's equipments and items?

[slslasher]

erm dun mind if i ask tis.where is the godmode tut?

[hotstriker]

but still i hav to figure out how to bypass

[VilleneuveJr]

Ifeel like downloading JMS again myself, with all the values ppl in here are sharing. :|

Sorry for double posting but would you really trust someone that took their own brother's equipments and items?

Well my brother doesnt play anymore and he said i could have the items :smoke:

[aquaboy007]

Wow..That is not a bypass dude lol..you have to KEEP THE DEBUGGER OPEN FOR IT TO WORK!

It doesn't DC you, I know it for a fact. Once you close the debugger the breakpoint gets taken off and is useless. And the reason you get GG error 500 is because it is detecting the debugger which again means you didn't bypass.

I did not say i closed the debugger, did I ? and if GG detected the debugger, its supposed to say"hacking threat blah blah" and not return gg 500. and i can log in with CE in the background, but after the character is selected, gg quits saying"hacking threat"

[strikeboy]

open CE
select msea
add address manually
check pointer
in first box [pointer] put in 6CC84C
in second box [offset] +C88
click ok

offset doesnt support "+" it gives me error
it says +C88 is not a vaild value

[strikeboy]

ou don't put in the offset with the + LOL...you just put in C88

The plus means if you add the value of the pointer + c88 = address

icic.. i go try.. thx a lot

[hotstriker]

sunbeam can u plz read my pm i got a few questions

[strikeboy]

after i add liao do i hve to change any value ? or freeze it ? coz i have do it.. but seem nothing diff leh

[xiaoOoaix]

o ya .. unlimited attack means wad ? will dc ?

[strikeboy]

o ya .. unlimited attack means wad ? will dc ?

not sure.. i still trying but i dun see any diff in any attack... lolz

[pro70131]

open CE
select msea
add address manually
check pointer
in first box [pointer] put in 6CC84C
in second box [offset] +C88
click ok

after u pressed ok..den do i hav to freeze it or do wat thing..

[holytupac]

Phew i tried all afternoon, was unsuccessful, i blame it all on my ignorance in hacking. Please allow me get this straight. Could anyone spot my noobness on how i failed?

Open CE
Attach MS
Memory View
Locate Adress on top window given by sunbeam(Bless his soul)
Typed in code to the right of given code in EAX box
Clicked on Zf(left box only)
Add address manually
Place in address (in 4 bytes)
Frezze
Apply to MS

and wallah! i failed, much appreaciated if anyone could sort me out

[Rocker]

OK question

All hacks work without DC under CE5.2?
Coz I always get DC when try Jump, Attk speed, more others

Or any method to disable CRC or CRC is still researching?

[hellborn]

If u used this on MSEA it will freeze/dc. if im nt wrng u wil nid to use sunbeam method of preventing to freeze/dc

[lalaman2002]

For msea:
use code caves for flawless, non-dc hacks. works for gravity, speed, jump.
as for god mode, just tick the zf flag, no need to add to list or freeze.

[Haku]

follow this settings u shouldnt d/c if ur settings follows..http://i8.photobucket.com/albums/a21/sunbeam906/Gravity/011.jpg...and unlimited atks means u when u hold ur atk button for as long as u want & u wont stop hitting..

[Rocker]

use code caves for flawless, non-dc hacks. works for gravity, speed, jump.
as for god mode, just tick the zf flag, no need to add to list or freeze.

OK Thx. I will this method ^ ^;
BTW, the old directly ZF method didn't work for the new client -*-

[lalaman2002]

OK Thx. I will this method ^ ^;
BTW, the old directly ZF method didn't work for the new client -*-

zf worked for me msea v.21
use ce 5.2, do not use the beta get the "finalised" version.

[DrTech]

Hmm... i managed to get godmode working... at least for this one that sunbeam kindly provided. Question though, is the value for Godmode static? or does it change everytime?

And how do I compile this into a simple trainer so that I don't have to go through CE all the time? (I'll be slowly experimenting before help is provided)

[lalaman2002]

Hmm... i managed to get godmode working... at least for this one that sunbeam kindly provided. Question though, is the value for Godmode static? or does it change everytime?

And how do I compile this into a simple trainer so that I don't have to go through CE all the time? (I'll be slowly experimenting before help is provided)

Technically it is static. and u'll need a debugger to do that, normal trainer (esp the one in the ce) can't do that.

[DrTech]

Technically it is static. and u'll need a debugger to do that, normal trainer (esp the one in the ce) can't do that.

So, you'll have to attach a debugger before being able to use the godmode?

Interesting.

[Rocker]

I use code cave for atk speed, CRC detect and get DC

OK back to godmode, godmode was found by the miss value?
If not, plz copy and paste the asm code around the jne line for me
coz I want to find godmode in my client, I don't play in msea T^T

[lalaman2002]

I use code cave for atk speed, CRC detect and get DC

OK back to godmode, godmode was found by the miss value?
If not, plz copy and paste the asm code around the jne line for me
coz I want to find godmode in my client, I don't play in msea T^T

code cave do not really work with att speed. it works with gravity, jump and walking speed and since u did not play msea i assume u play jms cos if u r playing the other with nprotect/game guard, its different.

[Rocker]

code cave do not really work with att speed. it works with gravity, jump and walking speed and since u did not play msea i assume u play jms cos if u r playing the other with nprotect/game guard, its different.

Thx for your suggestion

BTW, at last I found godmode addr. for my client by myself
Thx for everyone who cheers me %

[slslasher]

how do u find it?

[sunny1314]

What is CE?
where can i download it?

[jasonhwang]

@ sunny1314 SEARCH

sunbeam u can use my noob acc its level 16 i think lol msg me on aim or msn ur already on both lists its Hwang_jason@hotmail.com or azn pimp pimp< aim

gj with thereleases

[DownUpLeft]

^_^ bottom 2 are top and bottom

[holytupac]

Yeah i finnaly got it! too bad it crashes if you combine with uber shoot

i hope thanking ppl aint spamming

my deepest gratitude to lala2002, salvatore and kudos to sunbeam
ty for being ever so patient with my relentless bitching

my error was injecting the code multiple times which causes it crash instantly
while the changes was just to simply tag the Zf. i didnt realised that making changes would affect the game real time, rather then to inject it after every code build up. Hope this helps

[newking]

What is in your attachment?

[DrTech]

What is in your attachment?

It's a Cheat Engine Table file...

[DownUpLeft]

yea sry about that... open that .CT file with cheat engine as DrTech stated

1st adress: Your X
2nd adress : maps left wall ------------|
3rd adress : maps right wall ----------- |
4th adress : Unlimted atk |--- monster vac
5th adress : maps top wall ------------|
6th adress : maps bottom wall----------|

[Rocker]

Oop! the zf godmode changed!
it's effected by matk.

So I have to find Addr. for matk godmode ^0^

[holytupac]

rocker, i got godmode working, whats the search value for speed walk?

[lynn2secsie]

dammit still cant find 'patched cheat engine'. continuing search...

[newking]

Running CE makes my computer reboot. :/ What is wrong with it?

[mr lonely]

lol the only problem for me is that i dont have a bypass =\

[wasabisauce]

arg, im so nooooooooooob =( cant even find the zf lol =(!!!!!!!!!!!!!!!!!!!!!!!!!!!
i got the attck hack working, =) u dont notice it, but its handy dandy , esp for botting n stuff

[xiaoOoaix]

follow this settings u shouldnt d/c if ur settings follows..http://i8.photobucket.com/albums/a21/sunbeam906/Gravity/011.jpg...and unlimited atks means u when u hold ur atk button for as long as u want & u wont stop hitting..
erm.. sir i don see the settings .. but i saw it say "Opps My Image for this link is no longer here."

[un4me]

Hey Sunbeam, Can you give a sunbeam KMS users?

We, Korean MapleStory users, are also need VAC address and God mode.
If you need Korean MapleStory account I can give you one.
Thanks.

[lalaman2002]

erm.. sir i don see the settings .. but i saw it say "Opps My Image for this link is no longer here."

the url is correct, just "minus" the "...and" behind the ".jpg" and u'll get it

[SunBeam]

It's more than enough I've installed JMS. To play it, I always need to set Windows in Japan mode, and that requires restarts. So, I'm done with the asian games...I'm going to just post what you need for JMS, then you better go at those locations and start saving code [I'm not going to find the hacks all the time, due to my inactivity, but will try to update this thread on cleint changes]...

Out...

P.S. : I'm not going to post the god mode tut, due to the high demand. It will remain the ace up my sleeve. That'll always tell you who the "boss" is. Sorry to do that, I won't promise again and don't keep my word...

[strikeboy]

I use code cave for atk speed, CRC detect and get DC

OK back to godmode, godmode was found by the miss value?
If not, plz copy and paste the asm code around the jne line for me
coz I want to find godmode in my client, I don't play in msea T^T

someone care to explain or tell mi wats a code cave and how to do its?
Thanks!

[SunBeam]

Also, I retract my "updating as I can" feature. This will be done for THESE CURRENT versions...This is a hand out to you guys, so better start working on it. If you want future hacks, start learning around those addresses. Make pics of the code, do anything you want. But I'm tired of doing it for every version and client...

[rsdemon]

u know his done enough for us stop bugging him -.-

[lalaman2002]

update as u like sunbeam, its not a must, its a bonus ^^

[eternal_dream]

Thanks for the value.. but if u dnt mind, ppl here will be more happy if u give them the program, not the value bcoz many of them didnt knw how to use CE and maybe didnt know what is CE :)

[lalaman2002]

lazy ppl dun deserve to hack..if they dunno how to use the program they can go and learn. its not that hard and sunbeam posts tons of tutorials.

[salvatore]

Thanks for the value.. but if u dnt mind, ppl here will be more happy if u give them the program, not the value bcoz many of them didnt knw how to use CE and maybe didnt know what is CE :)


nice leech, he already gave value stop begging for the bypass k?
bypass is private, go find urself

[eternal_dream]

nice leech, he already gave value stop begging for the
bypass k?
bypass is private, go find urself


lol.. i got bypassed CE, no need for me to begging here.. i just care abt ppl that didnt knw what is CE and u just a selfish guy, dnt want other ppl use the hack right?? dnt bluff leh.. so annoying

[amzpyro]

Hey why did you delete of the godmode add for msea? I saw it yesterday night but I was to lazy to try it then.

[ilovehack]

i want to ask noob question...

why i always need to retick the zf when i reopen CE...

is that a way no need to retick zf??

[eternal_dream]

i want to ask noob question...

why i always need to retick the zf when i reopen CE...

is that a way no need to retick zf??


I dnt knw how to explain this prob, maybe u can solve this prob by asking the creator of CE :)

[lalaman2002]

Hey why did you delete of the godmode add for msea? I saw it yesterday night but I was to lazy to try it then.

read the whole post.. he said he is sorting out the hacks and will release it.

i want to ask noob question...

why i always need to retick the zf when i reopen CE...

is that a way no need to retick zf??

same reason y u need to login to maple everytime u play.
CE do not have a "remember" function since ppl do not solely use it for maple or for zf. the memory is cleared and reloaded everytime u run ce/maple.

[umbala]

P.S. : I'm not going to post the god mode tut, due to the high demand. It will remain the ace up my sleeve. That'll always tell you who the "boss" is. Sorry to do that, I won't promise again and don't keep my word...

Will you be doing any other tutorials in the future though? Perhaps a monster vac (I can do "uber vac" but don't like it so much) or something else with which a lot of us noobs are having trouble. I'm not asking for an exact time frame, nor am I asking you to make any promises. I really enjoyed your tutorial on indirect code injection and I'm just wondering if more will be forthcoming. =)

[eternal_dream]

Lol.. umbala, can post monster VAC here?? I tired finding it..

[TyRz]

if you want.. i can post the cheat table for jms, im thinking about quitting since ms is so boring.. i just bot all day and get marcoed or whatever.., i dont even enjoy the game

[SunBeam]

Hey why did you delete of the godmode add for msea? I saw it yesterday night but I was to lazy to try it thenIt's there now.

Done with the revision. Have a Merry X-Mass people ;) !

All hacks found and posted on main page [page 1]...

[TyRz]

well.. ill add some more, for jms

top vac, 6E0A30 + 8
bottem vac, 6E0A30 + 10
unlimited attack 006e12f4 + c54
no breath 006e12f4 + 208
tubi 633FB0 + 3c (dcay)
mapvac 006E2360 + a1

[xiaoOoaix]

MapleSea v0.21
-----------------

3. Wall VAC :

Same drill as above :

* "Address of pointer" : 6CBEF0
* left wall offset : 4
* right wall offset : C

erm.. sunbeam .. how to make it left wall offset .. and right wall offset .. sry for the noob question T_T..

[rsdemon]

just move ur char to left i think btw sunbeam wheres the unlimited atk it like vanished O_O

[SunBeam]

I posted only the most used ones :

Unlimited Attack : pointer - 6CC84C; offset : +C88 [this is for hand attack - fighters, thieves, swords, daggers etc...; not mages - as I've been notified]

- for MSea...TyRz posted the JMS one; look above, 2 posts...

[rsdemon]

thx man and merry christmas

[xiaoOoaix]

just move ur char to left i think btw sunbeam wheres the unlimited atk it like vanished O_O
i still donno how to make it .. can pros explain must clearer ?

[SunBeam]

Add it as said [read the MapleGlobal method], then change "right wall"'s value to the one of "left wall"...Monsters should warp now to the left most corner of the map you're in...

[xiaoOoaix]

Add it as said [read the MapleGlobal method], then change "right wall"'s value to the one of "left wall"...Monsters should warp now to the left most corner of the map you're in...
erm.. sry sunbeam to bother u again .. wad do u mean by change "rightwall"'s value to the one of "left wall".. how to change it

o.. i think i get it .. but how to change the X Coordinate or the Y Coordinate to the left wall offset and the right wall offset

[lalaman2002]

when u add the pointers + offset u'll get a new address for both the left and the right wall. just dbl click the right wall value and change it to the left's

[xiaoOoaix]

bleh .. i m such a failure .. i still don understand wad it means .. T_T...

[SunBeam]

More found :

Anti-Breath : pointer - 68199C; offset - 128

- for MapleGlobal...

[takushikun]

hi sun, is it possible for you to help me on the thread below ,_,

[totalnoob]

i've exactly the same settings as what sunbeam did..
- undo changes
- force memory to be writeable
- use kernelmode debugger
- stealth mode (kernelmode)

however once i activate godmode, after awhile my ms hangs...

godmode used to work on my computer, in previous versions of ms and back then my settings was only "open process".. now after formatting it, it doesnt work anymore.. tried many different combinations of the checkboxes and could get it to work.. lol.. any suggestions?

[eternal_dream]

SunBeam, what is the value for speed hack for MSea??

[lalaman2002]

SunBeam, what is the value for speed hack for MSea??

125 double

[spydermonkey]

Woah now report function, man i should of chosen them to host me, Nah...
...There are tons of Hiders floating about

[kenshin1985]

godmode for maplesea0.21 doesnt work for me. anybody can help me with it?
what i did:
- open ce
- point to maple.exe
- memory view
- top portion, right click find address
- right click on address, change register at this location
- tick zf once.

o yea i did all the kernal thingy and vac works fine for me

[lalaman2002]

go to settings and look through the tabs, ans select use kernalmode debugging, hide debugger and stealth. then try again cos the god mode does work if ce is tweeked correctly.

[kenshin1985]

go to settings and look through the tabs, ans select use kernalmode debugging, hide debugger and stealth. then try again cos the god mode does work if ce is tweeked correctly.

yup i did all that but it still doesnt work.. i did get vac to work though..

[lordliness]

can anyone send me a maple sea bot to lvl faster please ..:disappoin
you can add me in ur msn = nub@beggar.com
or you can send the bot to that e-mail ....
thx:o

[rsdemon]

begging=banned learn to make your own bot

[salvatore]

lol.. i got bypassed CE, no need for me to begging here.. i just care abt ppl that didnt knw what is CE and u just a selfish guy, dnt want other ppl use the hack right?? dnt bluff leh.. so annoying


u just care about people? dont make me laugh
slefish guy? naw, i remember when they can bypass ce with the jamilah thing and people start showing off in wizet about their hack and guess what? they patched it so fast XD.

More found :

Anti-Breath : pointer - 68199C; offset - 128

- for MapleGlobal...


when i did that it shows 0 value o_O and it doesnt work.
do i have to change the value 0 to 128 or wat?

[RJaD00o]

jms god mode doesnt work for magic attk. it works for only physical atk

[SunBeam]

@RJaD00o : have you read it all ? I said it doesn't work for magik attk...geez...

[salvatore]

Picture of hacks that work in maplestory global versi 0.14

Thanks to SunBeam ^^

http://img494.imageshack.us/my.php?image=maple00041oh.jpg
http://img494.imageshack.us/my.php?image=maple00063qc.jpg


Prove i can open ce while MS IS On


http://img494.imageshack.us/my.php?image=cheatneinge4md.jpg

P.S= i will help u how to bypass CE while ms is on, but i will just give hint -.-
PM ME and i will reply

To SunBeam: wow i`m so frustated about the godmode -.-

[lalaman2002]

lol i'm interested. mind telling me? ^^

[salvatore]

lol i'm interested. mind telling me? ^^


telling u on wat?
here

do we need rootkit? no we dont need it,

all u need:

-cheat engine
-go "run" and type cmd and type something and bla bla bla XD

[lalaman2002]

lol sry but i'm not intelligent enough to figure out what u typed in command prompt..too many possibilities..haha

[salvatore]

lol **** it -.- alot of people pm and said "hint plz and give me bypass"

wow i will give up. no more answer those question just pm and i will reply back

[lalaman2002]

lol well if u want to give ppl u will. no need to beg for it.

[W4rh4mm3r]

Picture of hacks that work in maplestory global versi 0.14

Thanks to SunBeam ^^

http://img494.imageshack.us/my.php?image=maple00041oh.jpg
http://img494.imageshack.us/my.php?image=maple00063qc.jpg


Prove i can open ce while MS IS On


http://img494.imageshack.us/my.php?image=cheatneinge4md.jpg

P.S= i will help u how to bypass CE while ms is on, but i will just give hint -.-
PM ME and i will reply

To SunBeam: wow i`m so frustated about the godmode -.-

Hmmm... Will PG still work as bypass for OMS or has it been patched?

[salvatore]

Hmmm... Will PG still work as bypass for OMS or has it been patched?

y dont u try? -.-
its patched

[Raposo]

well, i still can't figure out about how to bypass gameguard
i searched and READ in many places, topics, whatever.. and nothing
pls, salvatore, pm me with the BIG HINT xD
and no, this is not a beg. i just need some hints.

[luckynacho]

Same as Raposo, PLEASE!!!! PM me ANY hint!!!! ANY!!! Im so desperately in need of bypass.

[eternal_dream]

To SunBeam: wow i`m so frustated about the godmode -.-

What u mean? Ur godmode isnt working?

[salvatore]

What u mean? Ur godmode isnt working?


its working but i couldnt debug T___T when i debug it shut down the MS
i use kernel mode and everything. The settings are not mess up but still shut down the ms -.-

I use this method too and it doesnt work. I changed the value 44XXXXX to 174XXX and i froze it. it still dc
i rename jne to je, it still dc, T___T dunno how now -.-
all i need just the freaking debug.

[WiLLzXp]

its working but i couldnt debug T___T when i debug it shut down the MS
i use kernel mode and everything. The settings are not mess up but still shut down the ms -.-


I cant bypass and my bad salvator :ermm:

[DodgeViper69]

well, i still can't figure out about how to bypass gameguard
i searched and READ in many places, topics, whatever.. and nothing
pls, salvatore, pm me with the BIG HINT xD
and no, this is not a beg. i just need some hints.
Well. That is just what everyone else is querying, so yes, it is begging.
*On another note, SunBeam :), I got CE Bypassed, although like salvatore, I can't debug. I haven't tried to get it to work, although with patience, I'm sure I will. A positive note is that alot of people have this bypass T_T.

[mojoking1]

why are ppl keep whining...i can use it fine everything is perfect...if you cant do it dont use it

[haziq91]

who can giv me god mode hacks please guve me.

[eternal_dream]

its working but i couldnt debug T___T when i debug it shut down the MS
i use kernel mode and everything. The settings are not mess up but still shut down the ms -.-

I use this method too and it doesnt work. I changed the value 44XXXXX to 174XXX and i froze it. it still dc
i rename jne to je, it still dc, T___T dunno how now -.-
all i need just the freaking debug.

I think ur pc cant handle CE leh..

[salvatore]

why are ppl keep whining...i can use it fine everything is perfect...if you cant do it dont use it

lol u moron, those people are talking about maplestory global
not stupid mpalesea. stupid singaporean -.-

[Nextz]

stupid singaporean -.-


R U STIRING A FIGHT?

[salvatore]

R U STIRING A FIGHT?

this is forum and not in real life. dont act like u want to fight -.-
u wanna fight? come fly to usa anyway singapore is rich but SINGAPOREAN are poor, only indonesian and thailand and viet or chinese that are rich

k? thxbai :)

[umbala]

this is forum and not in real life. dont act like u want to fight -.-
u wanna fight? come fly to usa anyway singapore is rich but SINGAPOREAN are poor, only indonesian and thailand and viet or chinese that are rich

k? thxbai :)

Don't generalize about Singapore, not everyone there is poor like you say. They're actually very nice people and don't deserve to be slandered by the likes of you.

Just for the record, I'm central European not Asian, but I hate racism just the same.

[takushikun]

hey guys, theres also y coordinates for vac hack

its easy to figure out from these addresses-- theres a pattern.. hint is 4

good luck ! and have fun

by the way, i use global MS. i can use vac hack. salvatore, good thing you are friend with sun, you get everything

by the way i stil dont know how figure these from scratch, someone mind helping me out?

edit: i foudn out how to do vac from scratch now (just the wall one)

still dont know god mode and cant use it either :/

if anyone can help me with godmode, i will give you bypass + vachack on global.

[rsdemon]

who can giv me god mode hacks please guve me.
godmode addres is infront tut is infront to nice huh amazing what u can achieve if u read

[ThexRunningMan]

if anyone can help me with godmode, i will give you bypass + vachack on global.


what kind of help do you need with that? i dont have 10 posts yet so icant pm you, but my process explorer isnt working with dxwnd and so if you are having trouble making it work i can try helping you for a working bypass T-T;

[takushikun]

well.. i go to memory editor and tick zf..

nothing happens.

when i searched it for in normal search it appeared green... does that have something to do with it?

is there some specific things in settings i have to do?

anyway,, im vaccing it up on windia right now.. going to pig beach right now to get quick level 25+ or sthn

[Wilpower5k]

did you use kernal debugger?

[eternal_dream]

Originally Posted by mojoking1
why are ppl keep whining...i can use it fine everything is perfect...if you cant do it dont use it


I agree with u salvatore, singaporean think they too clever and want break up with my country long time ago.. i think if they searching for cheat, till they die they cant get it bcoz SINGAPOREAN IS STUPID!!

[takushikun]

sure did use kernel debugger

actually...

im not sure, how do you use kernel debugger?

[lalaman2002]

lol eternal its msia that kicked sg out due to sg's political view. haah not sg want to break one.. lky even cried..haha funny sia. and not all sg ppl are stupid, same as anyone from any country.

[eternal_dream]

lol eternal its msia that kicked sg out due to sg's political view. haah not sg want to break one.. lky even cried..haha funny sia. and not all sg ppl are stupid, same as anyone from any country.

Hei lalaman, i knw that but the important thing is sg is the one who making many problem in msia that like enemy in ur blanket.. so, sg been kicked out leh and one more thing, why u backing singapore?? r u singaporean?? and if not dnt backing them bcoz i want make a good realationship with all ppl except singaporean!!

[Wilpower5k]

sure did use kernel debugger

actually...

im not sure, how do you use kernel debugger?

Tick the checkbox that says kernel debugger in settings. Thats all there is 2 it, I think. Make sure you gather kernal data.

[lalaman2002]

i want make a good realationship with all ppl except singaporean!!

lol sry to disappoint u eternal. Honestly i dun really like the way sg is governed, just that it has lower crime rates and no natural disaster that still keep me here.
peace.

[eternal_dream]

Heh, i also dnt like war, crime and etc.. but, i will lonely if there is no crime and war in this world bcoz when come news time, just same story like before, bored..

[lalaman2002]

lol there are crimes here too, just that the crime rate is lower and i feel safer. And oh, there are many interesting things here other than crime to keep me "entertained" like the "Gold Tap" Foundation incident ^^

[salvatore]

lol people here is my settings of my ce

http://img393.imageshack.us/my.php?image=untitled4lr.jpg
http://img393.imageshack.us/my.php?image=untitled13yy.jpg

k thx bai

[SunBeam]

@salvatore : From what I see ur using a modified CE, otherwise you wouldn't have erased the version. On the other hand, if it's a modified version, it might not have the debugger fully working...

Also :

* go to Code Finder tab and tick :

- prevent debugger detection
- Use Debug Registers

* In Extra tab do the followings :

- Read/Write Process Memory
- Open Process
- Enable use of process watcher
- Enable use of kernel debugger
- Stealth mode (kernelmode)

Click OK. Close CE. Re-open it. And use Process Watcher to target MapleStory.exe. Simply open the Process List and click Process Watcher. Choose the MapleStory.exe u see there. Then do the debug thingie...

Hope this works. If not try CE v5.2 THE OFFICIAL ONE. Not any betas...

* The CE driver is detected. So it may be that once u use the debugger, the driver gets un'cloaked' and noted by nPro. Dunno - cuz if this happened, MS would close saying 'hack detected'...

SunBeam, out...

[salvatore]

@salvatore : From what I see ur using a modified CE, otherwise you wouldn't have erased the version. On the other hand, if it's a modified version, it might not have the debugger fully working...

Also :

* go to Code Finder tab and tick :

- prevent debugger detection
- Use Debug Registers

* In Extra tab do the followings :

- Read/Write Process Memory
- Open Process
- Enable use of process watcher
- Enable use of kernel debugger
- Stealth mode (kernelmode)

Click OK. Close CE. Re-open it. And use Process Watcher to target MapleStory.exe. Simply open the Process List and click Process Watcher. Choose the MapleStory.exe u see there. Then do the debug thingie...

Hope this works. If not try CE v5.2 THE OFFICIAL ONE. Not any betas...

* The CE driver is detected. So it may be that once u use the debugger, the driver gets un'cloaked' and noted by nPro. Dunno - cuz if this happened, MS would close saying 'hack detected'...

SunBeam, out...


LOL, go msn now... why off :chinese:

ok now my ce 5.2 is not crash anymore but, debug wont work -.-

[audoa]

thanks~

[SunBeam]

Well :

* CE 5.2 is detected w/e u do. Try this for a change. Open CE, close it. Now, log-in MS and wait for 30 secs. See what happens :D The driver is detected [dbk32.sys]. To be able to play MS again, reboot...

* Dun use any other CE, cuz :

- CE 5.0 doesn't have 'Change register at this address' in kernel-mode
- The other CE 5.2 'beta's are buggy

Use the official CE 5.2 found on the main site...

[chua_ahbeng]

Thanks for the hacks. the wall vac is the 1st vac i can use since it doesn't suck me together with the monsters.
How did u manage to find the wall vac address? Is it first by finding the coordinate of ur char, then go to the left/right wall, search for the value, find out what access to the address, using a caculator, find the offset?
Anyway, vac hack really speed up the lvling..but very easy to get caught since everyone can see the monster been suck to the spot.

Btw, sunbeam, have u ever attempted to do a scroll hack? Or is like everyone said, that it is close to impossible? Not asking for it, just want to know if it is really possible.

[sallysteph]

SunBeam thanks for the hacks.. U rox !

[DupeEx]

Thanks SunBeam for adding my God mode and me to the "Credits" haha.

[SunBeam]

No problem, man. I know my hacks have some 'bugs', cuz I never play the game to really test them out. I got a lvl 26 char on OMS and as for JMS and MSEA I dun have any chars. So it's normal that most do have bugs, cuz I got noob chars and can't test magic attacksor w/e u call them :)

I'm simply hacking here, game that I have played for like 1 month in my spare time :)...

As for the scroll hack, I haven't even used scrolls. I dun think they're usefull [well, not at my level, when leveling was done very easy and I had to change outfits to improve my char's stats], but i think it's doable.

Remember : MapleStory is a maths game. The coordinates show this thing clearly - negative/positive value on both axis. Also, about coordinates, if people wondered where is (0,0), that's in the middle of the MINI-MAP :) Enlarge the mini-map to the full map, and you got ur (0,0) :)...

[takushikun]

chua you are a smart guy o_o

so are you sun o_o

im just gonna record walls of ms which i can get from vac now, and search those from later versions ^^

[sarah1987]

can someone teach me how to run the godmode and others togther...
i can't seems to run godmode and my speed hack toghter...1 will not work..
im having this problem too , can someone help us? :eek:

[SunBeam]

"Can someone help us ?" Why don't you read MPC MapleStory section for 2 hours ? All you can read : old posts, new posts; then go to cheatengine.org and read the tutorials there and understand the concepts of using the program...then come ask for help...

[Of course I will be ignored and there will be some1 that'll help you - noob-to-noob hand-out]...

[PraM*]

I cant get it to work.... I tell you waht i did

1. I ticked all the flags taht SunBeam said.....Extras and Code Finder tab
2. I rebooted
3. I Open CE 5.2. http://syndiv.com/ce/download.php <--- THIS !
4. I open Maple Global and then......error , a possible hacking thread detected X_X

waht did i wrong ?!?!

[takushikun]

pram, you need a bypass

[roflhaha123abc]

Wow. Sunbeam...thank you very much~ ^___^

but...why did you remove the 'unlimited attack' hack? (for mSEA) can repost?:D

[PraM*]

O_o i thought that is the bypass o_O

then what is the bypass ? this prevx thing or waht ?

[Tani]

Can som1 help me and explain it more detailed u can IM me on

AIM: BanThe7Killers

Msn Messenger: Killing_Sparks@messengeruser.com

or can u put it in picture form
(im a newbie at hacking)

If u IM me
Tell me how to make a bypass work

[umbala]

Wow, why don't you just leave your home address too, so someone can come to your house and do it for you. Geeze.

[jasonhwang]

its been 10 minutes!! =\ MERRY CHRISTMAS AND A HAPPY NEW YEAR! lol

[SunBeam]

@roflhaha123abc : look on all pages. it's here...

@others : the ce driver is detected; u need a bypass...

[jasonhwang]

i thought u said u were gonna edit the posts and put in oms godmode. cant wait to find value lol

[SunBeam]

Well, I won't anymore. You got the starters from JMS. You can do it for OMS and the others...

[jasonhwang]

aw u buttmuncher lolget on msn!!

[WiLLzXp]

SO no working godmode until value its found?

[PraM*]

i have 1 problem......

i have ms now working with CE in background but the problem is

when i flag "use kernel mode debugger...." then CE gets detected O_o

so , waht can i do ....? anyone know ?

[SunBeam]

CE gets detected anyway. Open CE then close it. Run MS and wait 10 secs. You'll see it will shut down...

[PraM*]

CE gets detected anyway. Open CE then close it. Run MS and wait 10 secs. You'll see it will shut down...

no , it doesnt shut down after 10sec......

im in the game now for like 10 MIN and still no D/C or wahtever....

but i need the debugger to tick the Z/F flag.....

or how can i freeze the values ?!?

[WiLLzXp]

no , it doesnt shut down after 10sec......

im in the game now for like 10 MIN and still no D/C or wahtever....

but i need the debugger to tick the Z/F flag.....

or how can i freeze the values ?!?


Me 2 same problem with me need to find a way that ms dun detect it when i use debugger to tick ZF box.

[SunBeam]

no , it doesnt shut down after 10sec......

That's cuz u use other than 5.2. And to be able to use 'Change register at this address' u need CE 5.2 OFFICIAL one...answered...

[PraM*]

That's cuz u use other than 5.2. And to be able to use 'Change register at this address' u need CE 5.2 OFFICIAL one...answered...

no i have the offical >_> http://www.cheatengine.org/download.php from this site !

is this not the official ? then tell me , waht is the OFFICIAL.......

[WiLLzXp]

Same here using official but dosent work pram u got it to work yet?

[takushikun]

prevx1 prevents from editing ? <_<

[PraM*]

prevx1 prevents from editing ? <_<

Is this a question or a anwear O_o

when its an question: i dont know
when its an answear: i dont know

can u use debugger ?

[WiLLzXp]

prevx1 prevents from editing ? <_<

Whaat? Some 1 help me. I check use kernell mode debugger when possible but it enables process watcher then i get error saying enabling process watcher will stop unloader ahhhh this has been messin with me for hours!!! HELP

[Haku]

i could do with a faster atk speed now..

[umbala]

I got a couple of questions about Maple Global. Does the God Mode for GMS posted on page 1 work for anyone? Wall vac, anti-breath, speed attack, etc. all work for me but God Mode does not. Maple Japan is a different story, every hack works there including the full God Mode and the melee-only one.

Also, when I try to do "Find out what access this address" nothing ever comes up. Example; I search for 2000 double, add the address, then try to find out what access it and nothing comes up. The CRC checks don't show up and when I jump in-game, still nothing. I tried different settings in CE, but it doesn't help. Anybody know why?

* go to Code Finder tab and tick :

- prevent debugger detection
- Use Debug Registers

* In Extra tab do the followings :

- Read/Write Process Memory
- Open Process
- Enable use of process watcher
- Enable use of kernel debugger
- Stealth mode (kernelmode)

Click OK. Close CE. Re-open it. And use Process Watcher to target MapleStory.exe. Simply open the Process List and click Process Watcher. Choose the MapleStory.exe u see there. Then do the debug thingie...

I tried those settings, except I can't use Process Watcher to target MapleStory.exe because it's hidden. So I use Ctrl-P to input PID manually. Anyone know if that's causing the problem? If so, how do I de-cloak MapleStory.exe so I can target it with Process Watcher?

[PraM*]

how do you got it to work ?

waht you did ? details plz ^^

[SunBeam]

OMFG you people dun get it, do ya ?

In order to make god-mode work for OMS, you need to bypass the official CE v5.2 [yes, the one on the main site]. That is the fixed version that has all debugger-related bugs fixed....

TO WORK GOD MODE, YOU NEED A WORKING DEBUGGER. AND THAT COMES ONLY WITH 5.2 ! All the other CEs - 5.0 doesn't have anthing debug-related in kernel mode; 5.1 same and the 5.2 betas don't have 'Change register at this address' in kernel mode. And for god mode you need that option...So : CE 5.2 [not BETA, the official one...]

Also : keep CE open, enable process watcher, then load MS; it should be in the Process Watcher - MapleStory.exe...

[newking]

I still cant get jamilah to run the -p (PID) part, it reboots.

[SunBeam]

D'oh...GameGuard runs at kernel level. You basically lock applications in memory with Jamilah, and from what I've learned in the past about GameGuard, when we were using another rootkit called FU, if GG can't access the 'protected' process, it halts the loading process and throws you a BSOD [Blue Screen Of Death - yea u dun see anything, cuz XP reboots on BSODs :)]...

[umbala]

Hey SunBeam, I was using CE 5.2 final version all along I just forgot to mention it. The reason Process Watcher wasn't working was because I had to start MS first and *then* CE or I would get detected. Now it's fine, I figured it out. I can start CE first and it never gets detected. God Mode works, the debugger works perfectly too!

Thank you for babysitting us noobs. :)

[salvatore]

OMFG you people dun get it, do ya ?

In order to make god-mode work for OMS, you need to bypass the official CE v5.2 [yes, the one on the main site]. That is the fixed version that has all debugger-related bugs fixed....

TO WORK GOD MODE, YOU NEED A WORKING DEBUGGER. AND THAT COMES ONLY WITH 5.2 ! All the other CEs - 5.0 doesn't have anthing debug-related in kernel mode; 5.1 same and the 5.2 betas don't have 'Change register at this address' in kernel mode. And for god mode you need that option...So : CE 5.2 [not BETA, the official one...]

Also : keep CE open, enable process watcher, then load MS; it should be in the Process Watcher - MapleStory.exe...


lol remember yesterday -.- when i use 5.2, and it detected the db32 -.-
and i have to reboot again, thats so annoying :P

[SunBeam]

Ask him then how he got it working, cuz i doubt it ;) GG would detect his driver anyhow...

[koukii]

Hi, I'm very new here.Hope to get help. Where can i post qns to get help?? do i really need to click on 'Post reply" to get my qns posted?? thanks! :confused:

[umbala]

Ask him then how he got it working, cuz i doubt it ;) GG would detect his driver anyhow...

I'm not sure if that was directed at me, but I did get it working. GG does not detect the driver at all. Why would I lie about that? I would gain nothing by lying, except making myself look stupid. I should do like salvatore and post some lame pics and give pointless hints. LOL! I'm not going to do that. I'm not THAT lame. :rolleyes:

[thepretenderooi]

Dear SunBeam...
izit possible to find out the top and botom wall code and offset juz like the left and right wall offset u noticed?
well...monster still vac to a point if i set both 4 walls to it's co-ordinates??
I'm a player in msea..hope u get wat i meant...

[Nibbler26]

I Need Help.. I Have CE 5.2 The Final One.. I Play Maple Sea.. When I Do The God Mode.. It Works For Like Less Then 1 Min.. Then It Crashes.. Any Help.. I Got It In Stealth Mode (User And Kernel Mode).
Can Someone Tell Me What My Settings Should Be ... Also Sunbeam I Added You On Aim.. My Aim Is FortsCutestDom =).. Also Im Not Gonna Stalk You.. Ill Probably Ask You A Couple Of Questions Once In A While.

[AceOfSpades]

Anyone have unlimited attack for OMS? If you do...how do u find the adress/pointer? Thanks :)

[takushikun]

it dont detect.. ce 5.2 is bypassed... period

[Nibbler26]

@salvatore : From what I see ur using a modified CE, otherwise you wouldn't have erased the version. On the other hand, if it's a modified version, it might not have the debugger fully working...

Also :

* go to Code Finder tab and tick :

- prevent debugger detection
- Use Debug Registers

* In Extra tab do the followings :

- Read/Write Process Memory
- Open Process
- Enable use of process watcher
- Enable use of kernel debugger
- Stealth mode (kernelmode)

Click OK. Close CE. Re-open it. And use Process Watcher to target MapleStory.exe. Simply open the Process List and click Process Watcher. Choose the MapleStory.exe u see there. Then do the debug thingie...

Hope this works. If not try CE v5.2 THE OFFICIAL ONE. Not any betas...

* The CE driver is detected. So it may be that once u use the debugger, the driver gets un'cloaked' and noted by nPro. Dunno - cuz if this happened, MS would close saying 'hack detected'...

SunBeam, out...
Ty Sunbeam, You Truly Are The Best Of The Best CE Users I Ever Met Lolz.. I Will Try This And See If The God Mode Does Work.. Then Later I Will Learn More About Coordinates And Stuff.. Lolz.

[SunBeam]

I'm not sure if that was directed at me, but I did get it working.Not directed at you. It was retorical [see the blinking smilie :) ?]


Dear SunBeam...
izit possible to find out the top and botom wall code and offset juz like the left and right wall offset u noticed?
well...monster still vac to a point if i set both 4 walls to it's co-ordinates??
I'm a player in msea..hope u get wat i meant...

Same pointer : +8 | +10 :)

[umbala]

Not directed at you. It was retorical [see the blinking smilie :) ?]

I know, I know. I just said that because I didn't want to offend you in case you were talking to someone else. Sometimes I make a comment and the person goes "STFU! I wasn't talking to you!" Of course you wouldn't say that, I'm just using it as an example. :)

[shuyin505]

err sun... how do we backup the code for char's co-ord and left right wall
adn is ther such thing as top bottom wall???

[miotann]

where do i find the god mode for magic attacks?.

[xx88azn88xx]

darn it i get everything except the kernel debugger and ihave the official version but dunno how to use it any help ppl?

[VincenX]

i dun get how u guys say offical ce 5.2 is bypassed i got it but it isnt.. also do u open MS first then open CE? or ce first then ms does it matter?

[trueCross]

SunBeam's posted one hell of a hint there. "dbk32.dll/sys"

It doesn't seem that attaching the CE to MS nor modifying/editting are the reasons why GG shuts down MS.

Question, am I on the right track? The bypass itself is trying to...... (for those who understand where I'm getting).

[SunBeam]

SunBeam's posted one hell of a hint there. "dbk32.dll/sys"You got that right. As I earlier said, CE 5.2 is not bypassed by itself. By using ur bypass [PrevX or w/e] u only get past the program detection. The driver gets loaded in-memory when you open CE, and that is independent from the main program. So, do something to those files so they dun get detected ;) [dbk32.dll, .sys] An easy way to know if they are still detected or not, is to open CE, close it, then load MS. If you get the 'hackin detected' thingie, it means ur driver is detected...

[1337mopar]

You got that right. As I earlier said, CE 5.2 is not bypassed by itself. By using ur bypass [PrevX or w/e] u only get past the program detection. The driver gets loaded in-memory when you open CE, and that is independent from the main program. So, do something to those files so they dun get detected ;) [dbk32.dll, .sys] An easy way to know if they are still detected or not, is to open CE, close it, then load MS. If you get the 'hackin detected' thingie, it means ur driver is detected...

BOOM!

SunBeam, my driver is not detected :rambo: .

Trouble is, I don't think CE detects it either, because I am getting access violations. I'm going to see if I can use jamilah w/ no driver to make CE and OMS run simutaneously...

Thx with the driver tip :squareeye:

[eternal_dream]

If MS Global, it detect CE... but in MSea, not detected yet.. jamilah detected too :)

[PraM*]

BOOM!

SunBeam, my driver is not detected :rambo: .

Trouble is, I don't think CE detects it either, because I am getting access violations. I'm going to see if I can use jamilah w/ no driver to make CE and OMS run simutaneously...

Thx with the driver tip :squareeye:

:D thanks sunbeam and NoobHax ^^

now i have the same problem like u =p
im trying it with a programm....maybe it works....i hope so :P

or do you got it to work yet ? pm me =)

[SunBeam]

SunBeam, my driver is not detected.Cuz it's not loaded yet...

[1337mopar]

w00t! Bypassed! Trouble is, I get access violations at adresses which constist of only 0 and X... I can't use godmode, but I can use wall vac! w00t.

Heres some hints:
~
dbk32.sys
dbk32.dll

Loaded into memory, detected. When you exit CE, still loaded, and GG or MS will detect it.
~

Rest is removed, sorry everybody, but this was hard to get and I don't want it patched TT.TT

I'll still give hints though :happy:

[eternal_dream]

Ya, that's the way, lucky have hardworking user like u.. i knw this way but too lazy too write it :P

[SunBeam]

Took u people long enough :D...

[PraM*]

Took u people long enough :D...

lol but now we can only use vac hack and others..... not godmode X_X

we need a programm orsomething that hides this 2 files so that only CE can acces it.

hmm.....dont knwo waht programm X_X

[likepeas]

hi ... how wat do i do with the pointers .. a simple guide will do ...
thx

for: maplesea

3. Wall VAC :

Same drill as above :

* "Address of pointer" : 6CBEF0
* left wall offset : 4
* right wall offset : C

[miotann]

it doesnt matter so long as u have CE 5.2 and edit the settings, the god mode works perfectly but i need the address for god mode on magical attacks!

[shuyin505]

I think no one saw my previous post.Well nvm i'll repeat.How do we backup the codes of the wall vac and char coord like sun told us too

[eternal_dream]

I think no one saw my previous post.Well nvm i'll repeat.How do we backup the codes of the wall vac and char coord like sun told us too

Read the tutorial that SunBeam give..

[shuyin505]

you mean the tut bout pointer????i searched for it but got no result.Nvm i'll try searching again

[eternal_dream]

lol.. there is many search engine in the world, just try and u may find it..

[trueCross]

I believe, that those who only require CE 5.2 aren't playing oMS/gMS? When you're claiming your ability to hack, I suppose it would be best to name the version you're on. For myself, it's oMS/gMS. I'm sure that, although NoobHax may have his bypass, there has got to be an even better one (since it seems that SunBeam can do pretty much everything). For the news, I've also manage to the simple bypassing and wall vaccing, but it just isn't enough... Must........ get... full..... bypass! xD

[shuyin505]

duh i still can't find it

[mrhard2handle]

I trashed these files..
dbk32.sys
dbk32.dll

Then I loaded CE.I opent process list.Then created a process or maple story.exe.I load maple story.exe from CE and then I still get Hack alert...PLEASE TELL ME WHAT IM DOING WRONG:confused:

[sharr]

OMS 0.15 ->

GOD Mode address 0059C465 -> ZF

PS: Pointers still the same, no changes on coordinates and so on ;)

[1337mopar]

Mrhard to handle, you'll need those files. They are CE's drivers, lol. If you don't have them, it's easier to bypass, but you can't open memory view and whatnot. Just because those files aren't detected doesn't mean CE isn't, mkay? SO cloak CE...

:rambo:

[mrhard2handle]

Mrhard to handle, you'll need those files. They are CE's drivers, lol. If you don't have them, it's easier to bypass, but you can't open memory view and whatnot. Just because those files aren't detected doesn't mean CE isn't, mkay? SO cloak CE...

:rambo:
Can you please pm me some step by step tutorial.I tried everything and now Im just getting comfused.:mad:

[I3aI3yCat]

what is the meaning of Memory View?
sorry i m just a noob

What is the meaning of CE???
And i just download PG (Power Guard),what is the use for it?
is PG a bypss?
and what is by pass?

When i click "Change Rigister At This Location"
it shows "This Will Attach The Debugger Of Cheats Engine To The Current Process. Continue?"
when i click "Yes" my com will hang in there... ...
when i click "NO" there will ntg happens...
plz any plz help me
(i m playing Maple Sea)

[eternal_dream]

what is the meaning of Memory View?

Memory View is the place where we hack to change the game's data

What is the meaning of CE???

CE is Cheat Engine that used to hack game, ppl usually use it for searching some values for GodMode, speed hack and many more

and what is by pass?

Bypass is the thing that we used to used the hack that have been patched without any detection

When i click "Change Rigister At This Location"
it shows "This Will Attach The Debugger Of Cheats Engine To The Current Process. Continue?"
when i click "Yes" my com will hang in there... ...
when i click "NO" there will ntg happens...
plz any plz help me
(i m playing Maple Sea)

This problem usually occur when u not reading the tutorial carefully. I give u the tutorial and follow it step by step ::

www.free-hoster.cc/users/ughacker <== this link :: and download the file there, there's only one file there, so dnt ask any more question abt this :)

[hot21]

nothing to extract there ^_^>>>>>>>www.free-hoster.cc/users/ughacker

[I3aI3yCat]

Memory View is the place where we hack to change the game's data



CE is Cheat Engine that used to hack game, ppl usually use it for searching some values for GodMode, speed hack and many more



Bypass is the thing that we used to used the hack that have been patched without any detection



This problem usually occur when u not reading the tutorial carefully. I give u the tutorial and follow it step by step ::

www.free-hoster.cc/users/ughacker <== this link :: and download the file there, there's only one file there, so dnt ask any more question abt this :)


u give me this for what ???
inside just got "PK " nia.......................f-_-"""

[salvatore]

LMAO finally

To people who cant debug

here is the hint

Edit the:
-dbk32.sys
-dbk32.dll


kthxbai :)


P.S=yoh sunbeam, it took me like 5 days wtf :mad:

[eternal_dream]

Lol.. that thing also need 5 days?