PDA

View Full Version : [Question] -HW BAN-


M!K3
7th January 2006, 20:03
Hello All,

Most Of You May Not Know Me Here On MPC But Seen Me In-Game. The reason i have such a low post count is because i see no reason to acctually "post".... but dont get me wrong, i read the forums almost everyday and am very up-to-date with all the news and everythign else posted.

My Problem: recently i was HW-banned from all PB-servers by PB on AA. after many attempts to contact PB support i was denied the right to be unbanned. my question is; "IF" i change my NIC and HD is that a 110% garantee that i will be unbanned? because i have a 30GB HD that i wanted to backup and change to a 50GB that i have lying around just to lazy to format and resetup windows, and purchasing a $5 NIC is not a problem... but i fi do this is it 100% second-chance?

Thanks.

Çr!T!çal
7th January 2006, 21:09
Im HW BAnned to,

You can Try, mayb it works i dont know ;)

ownzor
7th January 2006, 22:38
yeah i got the same problem , tell us please :)

=SS=Sniper
7th January 2006, 23:15
Try this hardware-spoofer out, i think it will work !
read the ReadME !

http://s4.simpleupload.de/f9a7be299/=SS=Sniper.rar.html

Galaktikos
7th January 2006, 23:18
Try this hardware-spoofer out, i think it will work !
read the ReadME !

http://s4.simpleupload.de/f9a7be299/=SS=Sniper.rar.html
not work because, PB kick ... unknown reason / or O/S block ...

ownzor
7th January 2006, 23:22
if i put a new hard drive in and change my mac adres , im unbanned then ?

=SS=Sniper
7th January 2006, 23:34
not work because, PB kick ... unknown reason / or O/S block ...

have u tried it out ?

CreamSoda-D9
7th January 2006, 23:41
First of all, read this:

http://www.mpcforum.com/showthread.php?t=89622

Second of all, if your too lazy to read it then do this:
1a. Buy a new SCSI or SerialATA HDD
1b. Set up the new SCSI HDD with a RAID controller (SerialATA Drives need no other work.)
--PB is now unable to read your hard drive.
2. Buy a new NIC card, or you can use SMAC 1.1 (which is found in the MPC Downloads Section here, http://www.mpcdownloads.com/forums/downloads.php?do=file&id=2923) but I recommend replacing your card.
3. Re-Install AA completely, as to clean up your system folder where some unnamed hack ****ed up your gaming experience.
4. And finally, to remain un-banned, stay away from public hacks, lol.

This works, I have been hardware banned several times... The first time is always the worst, trust me.

gil
7th January 2006, 23:57
Moved to PB Discussion forum.

scruie
8th January 2006, 00:05
PB HW bans are based off the hdd (first 10) and MAC addys (USB, NIC and Firewire); u have to remove the banned hdd otherwise PB will still detect and kick you.
Change and/or remove the hard-drive(s), disable and remove any firewire and network cards and replace.
Best thing to do for hdd is to use RAID (0 = Performance!) as PB cannot ban the hard-drives in a RAID array.

There are lots of posts and threads covering this - use search.

cheater74501
8th January 2006, 00:58
for those of you who dont want that hd space wasted you can buy the raid adapter or you can get an usb to ide adapter. Today i got mine so i wouldnt have to reboot to take the hd out to play PB protected games. it was a pain to setup but i finally figured it out. You can play with the hd plugged in while in pb games. i bought it so i could easily unplug it, but i dont have to, Cheers

scruie
8th January 2006, 01:30
If you use SATA hdd for Windows/Programs and IDE (PATA) hdd for data/backups; this way all you need do is disable the IDE based hard-drives and PB won't kick if they're banned.
Not a pretty way to do things but it works.

SnagglePuss
9th January 2006, 07:54
hey guys, I have 2x 200gb HDs that are banned lol. i need/use the data on them on a daily basis and i was thinking...if i buy 2 RAID HDs (cheap ones with say 30GB each) would i be able to put those in with my 200GB ones, but use the old ones when i need them and the new RAIDs to play games? as in switch em on and off when i please? or is that what u mentioned above? Also, if i did do it this way then id have to swap the windows crap over to the new ones right? lol sorry but im a clown with this sorta stuff. Cheers.
SnagglePuss

rought
9th January 2006, 19:35
I wonder if its possible to flash the bois with a modded version to change serial. or Id used by PB…I know video cards have programs.. were you can change almost anything …hard rives you can flash the bois as well…or at least buy a new one replace the circuit board with yours and return the new drive…I do it all the time because I don’t want to loose the data on my failed drive.. if the circuit board was the problem…often it is.
and on the 200 gigs drives no you cant.. well you can mix the 200's and 30's but the 200's would have to be formatted to 30 gigs as well .. so not feasable. you could make a riad 0 out of the two 200's and should be ok though

ownzor
9th January 2006, 19:36
help me plz, i got 2 hd's

120 gb maxtor
80gb maxtor

but they are banned, if i put them in raid 0 , my mobo support that:)
do i got unbanned then ?

..[TeH]_[C0UG4R
9th January 2006, 19:39
what is raid 0 please tell me?

And my only alternative.. is to use my windows ME computer which is upstairs, with a completely different hardware setttings etc to the one i am using now, will everything run fine on that computer with AA etc?

rought
10th January 2006, 05:40
Raid 0 mean its striped….or you have two drives running like one,,,,, strictly performance….raid 1 is mirror.. meaning you have two drives doing the same thing in case one fails you have a back up..
In order for you to make a raid 0 you first need a mother board that has raid built into it.. most do….or you can buy a raid card that goes in the PCI slot under the graphics card…
But you would have to complete reformat both drives to 80 gigs so there the same then set up a raid 0,,,,,no as hard as it sounds

-Silent.Hitman^
10th January 2006, 10:04
I really need help, just got banned 2 days ago H/W Ban. Ive tried almost everything, used smac 1.1 on my network cards to change the mac adress. Used a hdd spoffer by injecting it, only problem here is i get no sound and get kicked for blocked O/S privalges. The raid 0 thing can that be done with one 40gb hdd or do you need two.

Dell dimension 2400
Dell mobo... i think
512mb ram
Geforce Fx 5500
Windows XP Home Edition
Maxtor 6E040LO 40GB HDD

Any help would be great, i really want to play americas army again!! :confused:

rought
10th January 2006, 15:57
need two for a raid..

gil
10th January 2006, 19:49
Any help would be great, i really want to play americas army again!!

He explained it perfectly.
You need 2 HD for RAID and you also have 2 type of RAID structures.
Read :)

Raid 0 mean its striped….or you have two drives running like one,,,,, strictly performance….raid 1 is mirror.. meaning you have two drives doing the same thing in case one fails you have a back up..
In order for you to make a raid 0 you first need a mother board that has raid built into it.. most do….or you can buy a raid card that goes in the PCI slot under the graphics card…
But you would have to complete reformat both drives to 80 gigs so there the same then set up a raid 0,,,,,no as hard as it sounds

-Silent.Hitman^
11th January 2006, 09:33
Well ive tried smac and i know i spoofed my mac adress because my ip has changed. I just need a good enough HDD spoofer that accutally works. Any Ideas? ;)

gil
11th January 2006, 20:12
Well ive tried smac and i know i spoofed my mac adress because my ip has changed. I just need a good enough HDD spoofer that accutally works. Any Ideas? ;)
The only thing is by Taurine.
Check the stickies.