L2Extreme (L2walker 10.2.3)

[LordShadow]

Note : This guide is ONLY for L2extreme do not post asking for other information on how to connect to other servers!

Alright, time to make the working guide. (this includes someones elses guide but it had a mistake in it which did not allow playability on L2Extreme)

Starting off you will need to download this file and EXTRACT it to a directory. (I dont care where just pick a spot)

http://rapidshare.de/files/11532787/eLwalker.rar.html
.
edit the "Set.ini" file that is inside your directory and add your username and password to the appropriate areas as shown below

Should contain the following :

[DEFAULT]
CountryList=l2extreme;
DefaultCountry=1
DefaultServer=4
DefaultCharacter=7
DefaultAccount= YOUR USERNAME HERE
DefaultPassWord= YOUR PASSWORD HERE
[l2extreme]
LoginServerIP=128.121.25.131
LoginServerPort=2106
ProtocolVersion=530
ServerList=[01]Titan;[02]Kaisten;[03]Staris;[04]Tempest;

Then only start L2walker do not config it yet.
Then start the program in your directory that has a shield on it =)
(I know there are a lot of ??'s in the program but you only need to do easy shit which i will explain.)
Alright click on the tab that says L2Walker 10.2.3 in the tab area of the token program (The program with the shield :cheeky: )
Select this bar area (image explains)

IMAGE PIC BELOW

http://img6.imageshack.us/img6/5515/walkguide12zj.jpg

IMAGE PIC ABOVE

choose www.l2extreme.com (LA1k) or whatever it is [only one l2xextreme]
Go to the protocol area that is right of the place you just were.
Enter 530
Click the sun button next to that
Click the other sun button (left side)
Go back to walker, select the site l2extreme
Select what server you want to be on
Choose manual on Character select
Press Login (once you set the login settings)

*NOTE*!!!!!!!!!!!!!! THE TOKEN PROGRAM MUST REMAIN ON AT ALL TIMES WITH THE SAME SETTINGS IN ORDER TO STAY CONNECTED TO L2X or CONNECT TO L2X

FAQ :

My status says : "Server is Basy" why?
Answer : The Server is full

I cant connect to the server but i pass the login server and auth..
Answer : The Server is down

Why does my character switch targets when heading towards one?
Answer : its a 10.2.3 problem, just make the Radius smaller and the attack range for melee bigger, (No higher versions of walker do NOT work on Lineage 2 Extreme)

THANK YOU FOR THE PREVIOUS VERSION OF THIS GUIDE!
Whoever made it lol... :speechles

[Soon to come]
-Botting Guide
-How to avoid GMs
-How to dupe items
and More...

Also place this in your directory, its a basic settings set-up for
new people to walker. Just click options, then load option and select the file.

[DeFalco]

the links arent working fix it pls.

[LordShadow]

Ah crap bandawith must have exceeded lol... (i'm not the only one that uses those links)

ok ill reupload



*EDIT* It took me 3 hours to reupload this on my dial up lol... so people better use this =) (Link Fixed)

[DeFalco]

yeah cool link is working but i have another question.
You then need to put that file into the directory and overwrite the one that is there...
But what file do u mean?

[LordShadow]

thanks i have to remove that part from the guide, i already did that for you guys in the new version i uploaded yesterday

Guide Fixed.

[lichetsh]

is it100 % can use in extreme??

[thefulleffect]

how do i get the token, ( ns/ts/fs ) numbers for the server i use ?
the site is http://ikon.servegame.org/
heres in ini file if it helps [ iKon ini ] (http://thundergrounds.com/l2/l2.ini).

thx in advance!

[lichetsh]

is it there hv l2waler 10.6.1 token or crack

[LordShadow]

is it there hv l2waler 10.6.1 token or crack

No, L2extreme has too tight security for 10.6.1 and it will not pass the Authentication Server. Also the Auth server bypass hack posted on the forum will not work on l2extreme either. So you need to use my guide if you want to get into l2extreme. I'm sorry that its an older version but it is the only thing that works on that server.

Sorry for the inconvenience

how do i get the token, ( ns/ts/fs ) numbers for the server i use ?
the site is http://ikon.servegame.org/
heres in ini file if it helps [ iKon ini ] (http://thundergrounds.com/l2/l2.ini).

thx in advance!

Sorry I'm not skilled with finding that sort of information, but I'm sure the other members can assist you. Guys?

[Sykune]

Wow nice guide ^^ my bot runs well

edit: ^^ found the problem (love the guide!)

[fgsonline]

when i died i want to go near city and teleport backto my battle area how to do it ? or its posible

[LordShadow]

when i died i want to go near city and teleport backto my battle area how to do it ? or its posible

Check out Options, Basic, then check "Dead Return"

[Matz0r]

Ur walker files seem trustly, ill dll and play, i hope i dont get hacked again.


And I want to down lvl a dwarf any suggestions? cuz the options in this version seems to not work property, and what about haste and alacrity

[fgsonline]

Check out Options, Basic, then check "Dead Return"
is it waiting at city or return back to combat area ?

[nnidoo]

19:04:54 欢迎使用天堂II行者，请访问网站www.tt2xz.com检查最新版本，或发表你的意见和 建义。
19:04:54 Link LoginServer Succeed.
19:04:59 Login LoginServer Succeed.
19:05:04 Link GameServer Succeed.
19:05:04 ->Login GameServer Fail.

the Server is normal man

[burninate]

When the bot is looking for a new target, sometimes it just sits there and it says "超出时间,换目标." in the system text...what does that mean?

[LordShadow]

Ur walker files seem trustly, ill dll and play, i hope i dont get hacked again.


And I want to down lvl a dwarf any suggestions? cuz the options in this version seems to not work property, and what about haste and alacrity

Sorry this version you have to use pots manually, buffs and heal skills work though, and no you need to Delevel manually by using the virtual map and force attacking guards, or play the real version and do it.

When the bot is looking for a new target, sometimes it just sits there and it says "超出时间,换目标." in the system text...what does that mean?

Make sure to read the FAQ

Why does my character switch targets when heading towards one (Has a japenese message)?
Answer : its a 10.2.3 problem, just make the Radius smaller and the attack range for melee bigger, (No higher versions of walker do NOT work on Lineage 2 Extreme)

19:04:54 欢迎使用天堂II行者，请访问网站www.tt2xz.com检查最新版本，或发表你的意见和 建义。
19:04:54 Link LoginServer Succeed.
19:04:59 Login LoginServer Succeed.
19:05:04 Link GameServer Succeed.
19:05:04 ->Login GameServer Fail.

the Server is normal man

Set Character Select to Manual, if it still dosen't work then the server is full.

[BillyBob-CA]

LordShadow, maybe you can help me out. I am quite familiar to L2Walker, I have used it in the past... now the one that you uploaded doesnt seem to be working correctly. Maybe it's just me, I donno? But I seem to be having problems getting the healbot to function correctly. All the self buffs/heals seem to be working alright but it seems like it doesnt want to do it to my party member. "Incorrect Target" does come up in the chatbox, and I am unsure why.

I have double checked
all my settings
case sensative name
clicking on target
dying and ressing
restarting
% values
range
in fight
and even started from scratch to reconfig it so that it may work properly, so far no luck.

Maybe your experience can help me out, Thanks. :)

--------
For the guy who wanted to use Alacrity
make a new file called alacrity.sec in the SCRIPTS folder and put this in you just run it from scripts, it will also work with haste potions:

CALL(UsePots)
RETURN(0)
LABEL(UsePots)
ITEMCOUNT(Potion of Alacrity,>,0)
{
MSG(Using Alacrity potion.)
USEITEM(Potion of Alacrity[ID=1829])
DELAY(1200000)
CALL(UsePots)
RETURN(0)
}

ITEMCOUNT(Potion of Alacrity,<,1)
{
MSG(No potions!)
DELAY(1200000)
CALL(UsePots)
RETURN(0)
}

[nnidoo]

Men PLz I need Online help to know How to Use it I can login now but I wanna Use it too
my Msn Is : nido@liosoft.com add me if you can help plzzzzzzzzz

???????????????????????????????????????????????
?can any one told me what this l2walker can do ?
???????????????????????????????????????????????

[BillyBob-CA]

Did some more testing today... It seems that the healbot starts healing/buffing after I res my main character. But once I lose a target (such as buffing myself) and retarget, it wont work anymore, any suggestions?

LordShadow, maybe you can help me out. I am quite familiar to L2Walker, I have used it in the past... now the one that you uploaded doesnt seem to be working correctly. Maybe it's just me, I donno? But I seem to be having problems getting the healbot to function correctly. All the self buffs/heals seem to be working alright but it seems like it doesnt want to do it to my party member. "Incorrect Target" does come up in the chatbox, and I am unsure why.

I have double checked
all my settings
case sensative name
clicking on target
dying and ressing
restarting
% values
range
in fight
and even started from scratch to reconfig it so that it may work properly, so far no luck.

Maybe your experience can help me out, Thanks. :)

[LordShadow]

No sorry billybob I dont use walker for heal/buff botting so I don't know.

Sorry.

[Light]

Does this walker have Auto Accept Trade? I can only find the auto reject one... need one walker with auto accept so i can try to dupe =) do if someone knows of one that has it pls leave the link or where to download it.

[dezer]

I can't turn it on... ;/ i do everything what guide says but always only

Link LoginServer Fail.

Wtf? :/ i tried other servers, but always only this

[COBECTb]

People help to adjust on this server http: // lineageii.ru/
LoginServerIP=213.219.248.98
LoginServerPort=7777
15:40:29 Link LoginServer Succeed.
15:40:35 ->Login LoginServer Fail.
help:cry: :cry: :cry:

[LordShadow]

Does this walker have Auto Accept Trade? I can only find the auto reject one... need one walker with auto accept so i can try to dupe =) do if someone knows of one that has it pls leave the link or where to download it.

only the older verisons (THAT DONT WORK WITH l2x) have that feature, sorry.

[abecadlo55]

"dead return" isnt working, any ideas ?

[Tw|sTeD]

Mine is connecting fine i get ingame etc... now all i need to know is how to get it to actualy hunt....
i click "begin combat" and it just stands there and when i close the bot and go in-game it litteraly is in the same spot i left it when i last logged off..... im mainly tring to adena hunt but how can i when the bot wont even move T_T any advise?

[Zenx]

Dude thats a sweet guide, right on, works great, and i was looking for a bot to work with l2extreme for days lol

[Zenx]

L2 extreme with C4, any bots workable??

[LordShadow]

L2 extreme with C4, any bots workable??

Does 10.2.3 still work?

[Zenx]

No and actually i checked the protocol in the enigine.dll its 656 now, 10.2.3 doesn't work, and now theres like a new news thing u have to accept, crap, i wonder if WP152b will even work, or maybe we need new tokens? bah i dunno im stupid

[lotheimod]

ye i think we need new tokens

[Barbarik]

Works perfect bro. Good job on the walkthrough.

[Zenx]

Does this bot freeze a lot or is it just me? Whenever i set it up and come back there are no mobs on the virual map and the bot hasn't really done much..... and then i have to exit out of the walker/wp and start a new one up to get it to work again

[paralaje]

Okay I can't get this to work, I did everything you said and this is what happens:
08:34:34 欢迎使用天堂II行者，请访问网站www.tt2xz.com检查最新版本，或发表你的意见和 建义。
08:34:34 Link LoginServer Succeed.
08:34:38 Login LoginServer Succeed.
08:34:41 Link GameServer Succeed.
And then it just stays there, I'be been waiting for about 10 minutes but no change.

[Barbarik]

Zen... you may just be putting your guy in the wrong zones as far as the Respawn timing.. Also If you havent noticed there servers are on the frits right now cause of the C4 Bugs and there goin back to C3. Now there implementing C4 little by little. So make sure, in your options make a re-login timmer for every 30 seconds. That way if your asleep and it goes down you guy will loggout but every 30 seconds after it will try to loggin agian and continue its fighting path.

GL!!

[Zenx]

Well this sucks, i had 10.6.3 or whatever, the newest eLWalker working on the C4 server, and now i gotta go back to this shit.... well im lvling alright its a 35x server anyway

[Barbarik]

yea lol its sinch. Which server u on?

[Zenx]

Kastien

[Barbarik]

we should hang out. I'll PM you my username.

[edit] i need 10 posts to PM so i'll pm ya sometime hehe

[cyx0r]

buffstack isn't working anymore ... and worth -> when i try to buffstack the server crash :S wtf.

[SoLiD__SnAkE]

What i need to play in this server: http://www.l2invasion.org

[yuming]

does any1 got the walker work again in c4 in l2extreme? if u do plz post how to connect it :cry: ;)

[dsafra]

rapidshare give me always this error Download-session invalid

i have deactived all firewall and antivirus but alwais can't download someone can help me?

Byez

[Djao]

i got problem to login on l2extreme

now it is c4 server
hwo to bot on it?

[risga]

Does 10.2.3 still work?

Does not work on C4!
Can u find one who works?
TY and see ya!

[panixtreme]

yeh...sum1 fid one that works with c4

[Barb]

I found something problem is with Walker patcher need newer one for example WP 3.21. Someone get the newest version WP 3.26 and link it here plz i have from http://sour.x33.ru demo and with it it works, but i guess it would be best full version of the newest. please someone get it.

[globus]

[Extreme]
LoginServerIP=128.121.25.131
LoginServerPort=2106
ProtocolVersion=656
ServerList=Titan;Kastien;Staris;Tempest

This Should work, but you MUST HAVE
L2Walker ver. 10.6.6 and L2 Agahnim Ver. Server+Walker Loader

(everything in ABC2 Pack)

[panixtreme]

Awesome, thanks. But does anyone know where i we can download FREE L2Walker ver. 10.6.6 and L2 Agahnim Ver. Server+Walker Loader

[Camater]

i have L2walker vers.,but its dosent work :( and where i can get? L2 Agahnim Ver. Server+Walker Loader

[Bastard]

Sorry this version you have to use pots manually, buffs and heal skills work though, and no you need to Delevel manually by using the virtual map and force attacking guards, or play the real version and do it.



Make sure to read the FAQ

Why does my character switch targets when heading towards one (Has a japenese message)?
Answer : its a 10.2.3 problem, just make the Radius smaller and the attack range for melee bigger, (No higher versions of walker do NOT work on Lineage 2 Extreme)



Set Character Select to Manual, if it still dosen't work then the server is full.

The radius that you say is in the "Pathing" option?
beacause i set it to 500 and short attacks when monster is 700 near

is this correct? because i still got te same problem.

Edit:
i got it...
In "Pathing" option set 1500 for example...
and in short attacks use 1600

then you see the bot working very well...
Thanks.

[Ballen]

06:50:45 Link LoginServer Succeed.
06:50:51 ->Login LoginServer Fail.

[DEFAULT]
CountryList=L2Extreme;
DefaultCountry=1
DefaultServer=4
DefaultCharacter=7
DefaultAccount=
DefaultPassWord=
[l2Extreme]
LoginServerIP=server.l2extreme.com
LoginServerPort=2106
ProtocolVersion=656 [I have also tried 530]
ServerList=[01]Titan;[02]Kaisten;[03]Staris;[04]Tempest;

I am using 10.2.3
Also using that "Shield" WP v1.52.b
Username and password are correct even tho I didn't show it above. Please explain in DETAIL what is wrong.