NightNinja
27th January 2003, 02:01
Seeing as recently there are new people constantly coming and asking common questions i have decided to create this thread so that no one who comes here will be confused. If there are any other terms that i have missed, PM me or any other CS aimvec MOD and we will update this ASAP.
What is an Aimvector? (short: Aimvec)
An Aimvector is basically a point on ur body that the aimbot will move your cursor to. Its a 3d graph using X Y and Z coordinates to plot points. For this reason AimVectors are comprised of 3 main numbers + 1/0 (standing/ducking). If your aimvector is said to aim at the head of the model You will see a red or white dot there (depending on ur version of OGC). This is a very basic description so that it can be clear to everyone.
How do i add Aimvecs to my OGC?
What you would do is find the typical aimbot configuration file (most hacks have an Aimbot cfg which is called "Aimbot.cfg" if not its somewhat close to that or something). Open it up with either notepad or wordpad and then find the bunny vec. Once u find it, skip about 2 lines and put in ur vec that u got, example:
//Example Vec
alias vecname "avclear;avadd 0 15.42 5.221 1.53;avadd 1 20.43 5.32 1.42"
Then you would close it and save it. Next, open up ur commandmenu.cfg or .txt and then find where the vecs are located, (if u were using OGC 9) you would put in something like the following:
"*" "Example Vec" "modelaim 0;vecname" // aim for head
This part differs depending on what OGC you are using, for this case i used OGC 9 because its the only VAC proof version at the moment
Once again- if you have any more questions PM me or any other MOD and we will try to answer you ASAP-.
What is an Aimvector? (short: Aimvec)
An Aimvector is basically a point on ur body that the aimbot will move your cursor to. Its a 3d graph using X Y and Z coordinates to plot points. For this reason AimVectors are comprised of 3 main numbers + 1/0 (standing/ducking). If your aimvector is said to aim at the head of the model You will see a red or white dot there (depending on ur version of OGC). This is a very basic description so that it can be clear to everyone.
How do i add Aimvecs to my OGC?
What you would do is find the typical aimbot configuration file (most hacks have an Aimbot cfg which is called "Aimbot.cfg" if not its somewhat close to that or something). Open it up with either notepad or wordpad and then find the bunny vec. Once u find it, skip about 2 lines and put in ur vec that u got, example:
//Example Vec
alias vecname "avclear;avadd 0 15.42 5.221 1.53;avadd 1 20.43 5.32 1.42"
Then you would close it and save it. Next, open up ur commandmenu.cfg or .txt and then find where the vecs are located, (if u were using OGC 9) you would put in something like the following:
"*" "Example Vec" "modelaim 0;vecname" // aim for head
This part differs depending on what OGC you are using, for this case i used OGC 9 because its the only VAC proof version at the moment
Once again- if you have any more questions PM me or any other MOD and we will try to answer you ASAP-.