[New UCE TUT] The best UCE TUT so far.

[hayhaxer]

i must have done something wrong...i put in my string...which is intr1cate and i put in a random word in the second...and it only found the DBK32functions =/

when they say...string1, string2, string3...does this mean make a new word for each one? or like intr1cate1, intr1cate2, or intr1cate3?

or u can just replace them like OT-string3, nop-string 4 , rpm-string5 , wpm-string6. give them number so it easy to remember. that's wut i did. is it rite? i don't kno either

hay, xjaaaason, it say to open that 3 files as delphi rite? or i open it with something else? it can't open. or do i just like rename them like dbk32--->string.dpr?

btw, thoes strings post on the tut sites does it matter if they not capitalize? i search for the strings not even captilize them. am i rite?

hay, xjaaaason, it say to open that 3 files as delphi rite? or i open it with something else? it can't open. or do i just like rename them like dbk32--->string.dpr?

btw, thoes strings post on the tut sites does it matter if they not capitalize? i search for the strings not even captilize them. am i rite?

[migthundra2]

Hey can u help me. i am stuck at step 3I. i can not find gui, scan type, or value type. so i can't really do what i am supposed to do. so plz help out.

[yaddidimean]

props. its very understandable

[xJaaaaason]

when i am replacing the words with my string...do they have to be completely different words? or can it be like...haha1...haha2...haha3....haha4

[CooFyre]

when i am replacing the words with my string...do they have to be completely different words? or can it be like...haha1...haha2...haha3....haha4

well haha1 is completely different from haha2 correct? =D

[BP878]

Now search and replace the following in all files. Set mask as " *.* ". (Include Subfolders)

*
dbk32.sys >> string.sys
*
dbk32.dll >> string.dll



My resulys are different than his. Does anyone know why? I used Actual search and replace and mine are different.


Can someone help me here?

[CooFyre]

Quote:
Originally Posted by BP878
Now search and replace the following in all files. Set mask as " *.* ". (Include Subfolders)

*
dbk32.sys >> string.sys
*
dbk32.dll >> string.dll



My resulys are different than his. Does anyone know why? I used Actual search and replace and mine are different.


Can someone help me here?

okay what you do is in the mask part of actual search and replace, type "*.*" (omit the quotes). then type in dbk32.sys in the search part and ____.sys in the replace part (note that i have a blank becuz ur suppose to rename whatever string u have).

repeat with dbk32.dll and ur done for that part.

*ALSO make sure you check INCLUDE SUBFOLDERS*

[BP878]

okay what you do is in the mask part of actual search and replace, type "*.*" (omit the quotes). then type in dbk32.sys in the search part and ____.sys in the replace part (note that i have a blank becuz ur suppose to rename whatever string u have).

repeat with dbk32.dll and ur done for that part.

*ALSO make sure you check INCLUDE SUBFOLDERS*

Okay well my mask is *.* and my replace part is "____.sys" (the blank as my string)

[wtfbleh]

can some one plz give me some tips and help me i'm at the end of the tut where i begin fixing and changing the name of the files once again to my ones how ever i come across something like this
ByPointer:=dword(g0su49'ObOpenObjectByPointer'))+2 ;
[Error] MainUnit.pas(10650): Not enough actual parameters
[Error] MainUnit.pas(10650): Invalid typecast
[Error] MainUnit.pas(10657): 'END' expected but 'TRY' found
[Error] MainUnit.pas(10687): '.' expected but ';' found
[Warning] MainUnit.pas(10688): Text after final 'END.' - ignored by compiler
and these are the errors i'm recieving, my email is antonysz_@hotmail.com plz add me and help =p

[miniSG]

...i seriously neeeeeeed some help on 3J =,=" i've been fixing errors...but got stuck on some and didn't figure out how to fix em for 6hours =,=""" heellllp~~~
add me on msn and help meh^^" mini_sg@hotmail.com "

[twaby]

I don't get it =(. I'm stuck on the part where you use actualsr...

[MrCurly]

hey when i try to download ce root or w/e its called from mega uploads its not there what do i need to do

[MPCNUB]

ok a couple of questions
when it says replace string i understand it has to diff than the string after it
but wat i dont get is do we add our string after the >>> or do we completely erase the word like cedriver53 and paste our string 1 in it ?

and 2 i got to the part where we have to compile our string.sys and when i type in cd C:\Documents and Settings\Joe\Desktop\Cheat Engine Delphi\DBKKernel

and hit enter it goes through but then when i have to type in ce and hit enter it says
"ce" isnt an inter or an external command operable command or program file i dont get it
i did exactly wat the tut told me or maybe i messed up on the renaming strings part ?

any help please ?

[lidoboixt]

yo how do u convert driver.dat to notepad

[javier696]

hey man the tut is very nice but i got one little program,, i just formated my pc and i need a program so i could c the screenshots u got on that site,,, any1 know the name of the program i need?

[kingdemonboi]

Im Almost done With the uce but i get this error...=[
:( :( :(
kallocs[0].address:=dword(Drift50(x)); <<thts where the error is...

THIS IS THE Error Line>>[ERROR]autoassembler.pas(531)not actual parementor

[wtfbleh]

lols i've done it lols
now the onli problem is it resets lols

[squrrilslayer]

i'm not flaming but i'm about to die laughing
well when is says [space] hit ur space bar lols
n e who i was wondering if some one could help me out
i'm up to the step where i search for myhook how ever i don't seem to be finding it

well sandy that just means u haven't installed something lols
u haven't installed one of the files so look for it
i feel so dumb...
ive also got another question. i cant install delphi. it says unable to connect to install server?!
(or something like that)

EDIT: i still have the problem with 2D- ive typed in
cd[ ]C:\Documents and Settings\John Geddes\My Documents\all hack related programs\Cheat Engine Delphi\DBKKernel
and it does not work

[corechink]

don't put your main ce directory in documents & settings. put it in like your C:/ drive. because it'll be all like can't find documents & settings, etc. and omit the [ ], all you do is:

<blahdhdflkd>cd C:/Cheat Engine Delphi/DBKKernel

then you press enter and it'll have this:

<blahdhdflkd>

type in ce like this:

<blahdhdflkd>ce

press enter, and it'll create your string.sys file in your main ce directory.

EDIT: the slashes go the other way, i wanna avoid 'em smileys

[squrrilslayer]

don't put your main ce directory in documents & settings. put it in like your C:/ drive. because it'll be all like can't find documents & settings, etc. and omit the [ ], all you do is:

<blahdhdflkd>cd C:/Cheat Engine Delphi/DBKKernel

then you press enter and it'll have this:

<blahdhdflkd>

type in ce like this:

<blahdhdflkd>ce

press enter, and it'll create your string.sys file in your main ce directory.

EDIT: the slashes go the other way, i wanna avoid 'em smileys

thanks for that... <blahdhdflkd> would be?...

EDIT: nvm... ive figured out what <blahdhdflkd> is.
dammit, now im onto the part where i need delphi 7 but mine is just not installing- it says unable to communicate with setup server.

EDIT2: im attempting to install delphi again for i think its the 7th time (liturally!). its getting really annoying!

[Herrkung]

I need help to install Delphi 7. Must I crack it with Daemon tools? If how do I do?

[bloodmack]

ok so i do step 2D and this is what happens..
anyone want to lend a hand?
http://img79.imageshack.us/img79/8854/problems16hk.jpg
and another questions is when we change it in 2B / 2C do we do it like
example1 or example32 1?

[deleteme91]

Now Type in "ce" as in screen shot 3 and then press enter. Hopefully you will get something like the last screen shot

i cant see the screenshot can any1 tell me how input the "ce"?

[squrrilslayer]

2D> type this exactly:

cd <address of your DBKKernel folder>
(replace the <address of your DBKKernel folder> with the... address of your DBKKernel folder eg: C:\UCE's\Cheat Engine Delphi\DBKKernel )
[hit enter]

after that, type:

ce
[hit enter]

its thats simple!
ide post ss's but im to lazy...

[Crazy Turbo]

Bandwith finished for pic ??? pic shows as [X] ,,

[pikyang]

sry if this is obvious but if i follow this tut and put in undetected strings or something will it work with pointers

[Herrkung]

What Ive understand it should. But can any1 help me with installing Delphi7?

[Clinton22]

:(
well when i try to compile the dll i get this error
this line gets highlighted
function 43gx(hProcess:THandle):BOOL; stdcall;
and it says
Error blahfunctions.pas(#): IDENTIFIER EXPECTED BUT NUMBER FOUND
please help thanks

[MPCNUB]

don't put your main ce directory in documents & settings. put it in like your C:/ drive. because it'll be all like can't find documents & settings, etc. and omit the [ ], all you do is:

<blahdhdflkd>cd C:/Cheat Engine Delphi/DBKKernel

then you press enter and it'll have this:

<blahdhdflkd>

type in ce like this:

<blahdhdflkd>ce

press enter, and it'll create your string.sys file in your main ce directory.

EDIT: the slashes go the other way, i wanna avoid 'em smileys

Thanks For The Help Corechink I Greatly Greatly Appreciate it

[nestea_king]

Hey, if I want to add new strongs, do I have to do everything all over again? Im already past the green text strings, and I didnt know there were more until I was finished T.T I'm willing to do everything all over again if I have to, I'm just asking if I have to do it all over.

WTF another problem. I searched for ScanType, and replaced them all with my string. But then when I go to Delphi and open the GUI it and click the ScanType box, it still says ScanType in the object tree. I even double checked on Actual Seacrh & Replace, it still says there are no more "ScanType". Then I checked the string I replaced ScanType with, and its all there. So I don't know whats wrong, it APPEARS to be that I successfully changed all the "ScanType" to my string, but it doesn't prove to be that way in the GUI.

P.S. I don't know if this is why, but when I open up Delphi. I got to cheatengine.bpg, then I go to view>project manager>expand cheatengine.exe then I double-click Main Unit, and the unit appears, not the GUI. So I pressed shift+f12 to toggle between the unit, and the form. THEN the GUI shows up. I don't know if this is the reason why this is the reason why ScanType still appears in the GUI.

Someone please help....

[sOuL(]

but i still cant see the pictures

[ekysp]

you probably made a typo when you replaced scantype. the same happened to me. couldnt find it anymore, couldnt find the word i replaced it with. started over again. now, that im finally done i get to know that there are new strings. weee :S

[corechink]

Here are the pictures. When i packed it, it was in some crappy order, but i numbered them in appearance in the tut, m'kay?

EDIT: pictures removed

[MPCNUB]

cant wait to look at those pics
im confusin myself on one part
on the actual search and replace part lets say im searching for vqe to change it to lets say my string is ghost
so im gonna change it to ghost4 do i modify all or just in the dbk32 folder ?
and with these new strings do i search and replace those also ?

[corechink]

yeh, you modify all. remember, you need to read every post because some of this stuff is already covered, especially by J-C. but modify all, unless it tells you not to, like at step 3C, where you only include CEHook.dpr and hypermode.pas only, so that's when you click modify selected [the highlighted files]. i don't know about the new strings, i don't know them, but i'm pretty sure that you do search and replace those as well. for a tip though, make the new string numbers start with 63 because the last one is "ScanText," which is string62. otay?

EDIT: pic's should be up [right now is 11:32 AM Pacific Time]

[Evan.N]

I'm stuck on step 3J. I finnish with the trainerwithassembler error but i don't get this one

"[Error] formProcessInfo.pas(62): Types of actual and formal var parameters must be identical"

when i double click the Error it brought me to this ling "i:=String50(@idt[0],32);"

[kingdemonboi]

Im Still Getting A Error When I Was Compiling My Engine
--->>>[Error]autoassembler.pas(531):Not enough actual parameters
--->>>[FatalError] MainUnit.pas(11):Could not compile used unit 'autoassembler.pas'
Those Are My Only Errors Plss Help...=[
Would Anyone Plss Help ME??!!I Tried For 8 hrs Still no one helps...

[MPCNUB]

yea srry about that thanks a lot man youve been real helpfull to me and everyone else here
if you dont succesfully make yours id gladly send u mine when im done =)

[corechink]

the one you finish better be w/ the new strings, kay? haha jp. but for first two posts of this page, make sure that you downloaded the trainerwithassembler.exe file from J-C [i think]. then slap it into your main CE directory and try compiling cheatengine.exe. oh yeah, make sure cheatengine.exe on your project manager is BOLDED. it usually is on cheatengine.RUS when you open up cheatengine.exe with delphi, so you gotta remember to change it, this is highly important.

[MPCNUB]

the one you finish better be w/ the new strings, kay? haha jp. but for first two posts of this page, make sure that you downloaded the trainerwithassembler.exe file from J-C [i think]. then slap it into your main CE directory and try compiling cheatengine.exe. oh yeah, make sure cheatengine.exe on your project manager is BOLDED. it usually is on cheatengine.RUS when you open up cheatengine.exe with delphi, so you gotta remember to change it, this is highly important.

yea im gonna edit the new strings jc posted the strings for 780 so i edited new ones and old ones. and i didnt know about that trainerwithassembler.exe lol so im gonna put it in my main ce folder with all those files and stuff in it right ? and that compile the exe is one of the last steps also ??

[iggiland99]

im stuck on step "3b"

[XXXJOSHXXX]

Im new at this and im stuck at step 2d.
wat addresses do i need to copy(i have no pictures for some reason)
please help me

my last uce doesnt work any more >.<

[MPCNUB]

ok now its bein gay before i started over and i was at the compile step id hit and it would tell me errors now when i started over and knew wat to do and what not i hit compile and it shows a tab called form and unit but it doesnt look anything like wat i saw when it would tell me errors =\

wow i got to compilin the ce hook and i have all these error wtf i didnt skip a step i read carefully and many times over didnt skip a step or nothing

[Warning] CEHook.dpr(292): Combining signed and unsigned types - widened both operands
[Hint] CEHook.dpr(251): Variable 'tempj' is declared but never used in 'scanbits'
[Hint] CEHook.dpr(347): Variable 'dlladdr' is declared but never used in 'GetMemoryRanges'
[Warning] CEHook.dpr(2344): Combining signed and unsigned types - widened both operands
[Hint] CEHook.dpr(2360): Value assigned to 'k' never used
[Hint] CEHook.dpr(2359): Value assigned to 'j' never used
[Hint] CEHook.dpr(819): Value assigned to 'j' never used
[Hint] CEHook.dpr(804): Value assigned to 'j' never used
[Hint] CEHook.dpr(780): Value assigned to 'SingleValue' never used
[Warning] CEHook.dpr(1083): Variable 'ByteValue2' might not have been initialized
[Warning] CEHook.dpr(8118): Combining signed and unsigned types - widened both operands
[Warning] CEHook.dpr(8469): Combining signed and unsigned types - widened both operands
[Warning] CEHook.dpr(8470): Combining signed and unsigned types - widened both operands
[Warning] CEHook.dpr(8491): Combining signed and unsigned types - widened both operands
[Warning] CEHook.dpr(8492): Combining signed and unsigned types - widened both operands
[Warning] CEHook.dpr(8570): Combining signed and unsigned types - widened both operands
[Warning] CEHook.dpr(8594): Comparing signed and unsigned types - widened both operands
[Warning] CEHook.dpr(8597): Combining signed and unsigned types - widened both operands
[Warning] CEHook.dpr(8603): Combining signed and unsigned types - widened both operands
[Warning] CEHook.dpr(8614): Combining signed and unsigned types - widened both operands
[Hint] CEHook.dpr(6929): Value assigned to 'foundisfilled' never used
[Hint] CEHook.dpr(7194): Value assigned to 'foundisfilled' never used
[Hint] CEHook.dpr(7462): Value assigned to 'foundisfilled' never used
[Hint] CEHook.dpr(8445): Value assigned to 'foundisfilled' never used
[Hint] CEHook.dpr(8572): Value assigned to 'l' never used
[Hint] CEHook.dpr(2942): Value assigned to 'j' never used
[Hint] CEHook.dpr(2927): Value assigned to 'j' never used
[Hint] CEHook.dpr(2903): Value assigned to 'SingleValue' never used
[Warning] CEHook.dpr(2843): Variable 'bytearray' might not have been initialized
[Warning] CEHook.dpr(4108): Variable 'helpsingle' might not have been initialized
[Hint] CEHook.dpr(8706): Value assigned to 'UnknownInitialValueScan' never used
[Hint] CEHook.dpr(8670): Value assigned to 'Total' never used
[Hint] CEHook.dpr(8644): Variable 'j' is declared but never used in 'UnknownInitialValueScan'
[Hint] CEHook.dpr(8646): Variable 'actualread' is declared but never used in 'UnknownInitialValueScan'
[Hint] CEHook.dpr(8652): Variable 'Max' is declared but never used in 'UnknownInitialValueScan'
[Hint] CEHook.dpr(8654): Variable 'toread' is declared but never used in 'UnknownInitialValueScan'
[Hint] CEHook.dpr(8657): Variable 'a' is declared but never used in 'UnknownInitialValueScan'
[Hint] CEHook.dpr(8658): Variable 'b' is declared but never used in 'UnknownInitialValueScan'
[Hint] CEHook.dpr(8660): Variable 'p' is declared but never used in 'UnknownInitialValueScan'
[Hint] CEHook.dpr(8801): Variable 'found' is declared but never used in 'ScanMemory'
[Hint] CEHook.dpr(8824): Variable 'i' is declared but never used in 'TScanThread.Execute'
[Hint] CEHook.dpr(8825): Variable 'PseudoProcessHandle' is declared but never used in 'TScanThread.Execute'
[Hint] CEHook.dpr(8826): Variable 'PseudoThreadHandle' is declared but never used in 'TScanThread.Execute'
[Hint] CEHook.dpr(8827): Variable 'ProcessHandle' is declared but never used in 'TScanThread.Execute'
[Hint] CEHook.dpr(8828): Variable 'ThreadHandle' is declared but never used in 'TScanThread.Execute'
[Hint] CEHook.dpr(8829): Variable 'oldpriority' is declared but never used in 'TScanThread.Execute'
[Hint] CEHook.dpr(8830): Variable 'oldthreadPriority' is declared but never used in 'TScanThread.Execute'
[Warning] CEHook.dpr(8950): Constant expression violates subrange bounds
[Warning] CEHook.dpr(8975): Return value of function 'WndProc' might be undefined
[Hint] CEHook.dpr(8861): Variable 'i' is declared but never used in 'WndProc'
[Hint] CEHook.dpr(8861): Variable 'j' is declared but never used in 'WndProc'
[Hint] CEHook.dpr(8861): Variable 'k' is declared but never used in 'WndProc'
[Hint] CEHook.dpr(8862): Variable 'f' is declared but never used in 'WndProc'
[Hint] CEHook.dpr(9008): Value assigned to 'i' never used
[Hint] CEHook.dpr(9069): Variable 'j' is declared but never used in 'InitializeHyperWindow'
[Hint] CEHook.dpr(9069): Variable 'k' is declared but never used in 'InitializeHyperWindow'
[Hint] CEHook.dpr(9156): Variable 'crashcount' is declared but never used in 'IHWCI'
[Hint] CEHook.dpr(9157): Variable 'op' is declared but never used in 'IHWCI'
[Hint] CEHook.dpr(9158): Variable 'ask' is declared but never used in 'IHWCI'
[Warning] CEHook.dpr(9317): Comparison always evaluates to False
[Warning] CEHook.dpr(9317): Comparing signed and unsigned types - widened both operands
[Warning] CEHook.dpr(9291): Return value of function 'MyTimerHook' might be undefined
[Warning] CEHook.dpr(9338): Constant 0 converted to NIL
[Hint] CEHook.dpr(9340): Value assigned to 'winmmlib' never used
[Warning] CEHook.dpr(9345): Variable 'bytearray' might not have been initialized
[Hint] CEHook.dpr(80): Variable 'scanning' is declared but never used in 'CEHook'
[Hint] CEHook.dpr(81): Variable 'CEScanWindow' is declared but never used in 'CEHook'
[Hint] CEHook.dpr(82): Variable 'x' is declared but never used in 'CEHook'
[Hint] CEHook.dpr(85): Variable 'bytearray' is declared but never used in 'CEHook'
[Hint] CEHook.dpr(91): Variable 'bitoffsetchange' is declared but never used in 'CEHook'

[corechink]

iggiland99: to save all three of the files as told [which are the ones that you edited from with search and replace] you need to know where the files are. what i did is that i opened up windows explorer and checked the locations of the files that are supposed to be saved as new names [newkernelhandler.pas, DBK32functions.pas, and DBK32.dpr].

WARNING: do NOT open up the .bak files, open up the ones with the specific .pas or .dpr file extensions. this could be easily solved by only looking at specific file extensions on the drop-down menu between where it says file name and save as type.

save each file to their designated folders. do as told. then, for the dbk32.sys and dbk32.dll part, go to actual search and replace and replace those files with string.sys and string.dll [for example corechink.sys and corechink.dll]. open up the file string.dpr [in my case corechink.dpr] with delphi and compile it. if you got an error, i can't help you there buddy. i've never had errors with this.

TIP: next time, be a little bit more specific about what you're asking for, we want optimum help-age.

MPCNUB: yeah, it is, kinda. it's the last hill before actually compiling your own UCE. the strings provided by J-C are from rev 780, but since the july 4 event, it is now rev 783 i think. but yeah, just slap the file into your main ce directory and that will get rid of your error or fatal errors other than this error :

[Error] autoassembler.pas(531): Undeclared identifier: 'KernelAlloc'

then after that, just delete the spot it highlighted with the string you put in for KernelAlloc, in my case corechink48. otay?



EDIT:

XXXJOSHXXX: god damnit, read the PREVIOUS POSTS. you probably ARE new to this, because you don't read any of the posts put on before! [B]read all the posts before posting something of your own. some of this stuff is already covered, and one of my previous posts already covers this problem.

MPCNUB: *whistles* that's a lot of hints and errors and warnings.

[MPCNUB]

just slap the file into your main ce directory and that will get rid of your error or fatal errors other than this error [bleh, tongue twister]:

[Error] autoassembler.pas(531): Undeclared identifier: 'KernelAlloc'

then after that, just delete the spot it highlighted with the string you put in for KernelAlloc, in my case corechink48.


ok im just gonna wait for the pics then im gonna start all over again
btw what file do u mean the auto assembler exe thing ?

[XXXJOSHXXX]

Sorry MPCNUB =P

[corechink]

MPCNUB: ignore that. where it says kernelalloc, it's pointing to a spot that needs editing [that's what i think]. just change it to whatever word you put in place for all the kernelalloc's [again, corechink48]. then compile it again. do the same thing, except that the words change, but that's when you have to look at your list of string changes and replace it with whatever word you put in place for that. etc. get it? and i thought i posted up the pictures?

XXXJOSHXXX: you meant me, right?

[MPCNUB]

yea u did but we gotta wait for admin to scan them i guess

[corechink]

really? didn't know that. i tested it and it allowed me to download... ahh well, just be patient. i stayed up late last night doing it, but i finished it only to find out that it would shut me off when i was about to check if it could work. i guess it's because of the new gameguard files, my uce is updated to rev 770. so be patient, and do it slowly. i've done this before, so it comes as common sense for all the stuff i do for this. haha.

[kingdemonboi]

Im Still Getting A Error When I Was Compiling My Engine
--->>>[Error]autoassembler.pas(531):Not enough actual parameters
--->>>[FatalError] MainUnit.pas(11):Could not compile used unit 'autoassembler.pas'
Those Are My Only Errors Plss Help...=[
Would Anyone Plss Help ME??!!I Tried For 8 hrs Still no one helps...
Now would be about 9 hrs...can anyone help with my errors the ones above..Still online waiting for answers..=[

[XXXJOSHXXX]

corechink lol woops i was still part sleep when i was typing i meant u of course =)

okay can some 1 tell me wat to copy in 2D. ive been looking in all the posts for the past hour or so.

[DuckPunisher]

Hey i'm quite new to hacking and stuff, but my computer keeps restarting when i'm connected to maple for like 30 seconds. I did change all strings + the new ones posted in page 7.

Can anyone tell me what i'm doing wrong?

[MPCNUB]

tut pics still not approved =(
could u send em to me core ?
thats if your up to it if u dont want to its fine ill wait

marvolus05@yahoo.com

[0sama]

Don't get it xP

[Herrkung]

Still no1 has answered my question. I cant install Delphi7 because i need some Serial number. Can any1 help?

[corechink]

don't put your main ce directory in documents & settings. put it in like your C:/ drive. because it'll be all like can't find documents & settings, etc. and omit the [ ], all you do is:

<blahdhdflkd>cd C:/Cheat Engine Delphi/DBKKernel

then you press enter and it'll have this:

<blahdhdflkd>

type in ce like this:

<blahdhdflkd>ce

press enter, and it'll create your string.sys file in your main ce directory.

EDIT: the slashes go the other way, i wanna avoid 'em smileys

XXXJOSHXXX: this was in page 18. look more carefully.

duckpunisher: i have the same problem. apparently some strings are still detected in the ce. just wait for updates. we're still in high times from the patch, so it takes a while to come up with something new.

MPCNUB: sent.

herrkung: when you downloaded and extracted all the files from delphi7e, you should have gotten something called 'keygen'. when you launch the application, it will give you a serial number and key to crack delphi. copy down the keys, then get on with the installation.

[MPCNUB]

not there =\

[jety]

is it working?
should I even try to create a new UCE?

[MPCNUB]

is it working?
should I even try to create a new UCE?

yea it works i just need a little help JC created his now workin undetected CE with this guide i think. only thing im worried about are the strings jc also posted the rev 780 strings so if he used those (which i think he did) then we all good and itll work =)

[BP878]

Now search and replace the following in all files. Set mask as " *.* ". (Include Subfolders)

*
dbk32.sys >> string.sys
*
dbk32.dll >> string.dll



My resultss are different than his. Does anyone know why? I used Actual search and replace and mine are different. All my settings are the same as his but yet i get different results.

[SoccerGoalie]

Moderators, can you please delete all the wow thanks this tut is the best!, etc posts so we can condense all the posts that contain new rev780 strings and help people who need to find all of the new strings to change an easier time? and maybe make this the official strings topic...

[trinity1643]

hey all of your images are not working cuz u used all the bandwith, so can u send me the images in my message box through like imageshack or something else, and redo the page cuz without pics i dont understand anything thanks

[SoccerGoalie]

i have a question, when you are changing all of the strings using actual search and replace, is it ok if you have [space]string
like
| OPE for VQE instead of
|OPE
?

[jerrison]

well in the posted DDK it redirects me to microsoft, i downloaded it, but when i click install DDK setup doesnt appear... help

[Evan.N]

Can any help me with this error

http://img120.imageshack.us/my.php?image=probleme8ie.png

[Herrkung]

corechink I cant get it working I found the keygen and opened it and I get the serial number and all but when I type it in it dont work. And after how do I crack it? Im going to bed and will read answer tomorrow ;)

[XxK3v1NxX]

well in the posted DDK it redirects me to microsoft, i downloaded it, but when i click install DDK setup doesnt appear... help i think your suppose to burn that file with magiciso or something and install it, read what it saids in microsoft word ... okay i done what it ask to install iam stuck now in this part -----------> 2A. Changing the basics and manipulating //hideme

Find driver.dat in your main CE Source and open in notepad. <----- where do i find the driver.dat? zzz this tut really need pics

[SoccerGoalie]

it has pics
u find it in cheat engine delphie/cheat engine delphie/
and look for a file that says driver (for me it was a windows media player icon)

[MPCNUB]

hmmm stuck on 3f when i hit 0 then hit it again it wont work on my calc i hit 0 like 7 times and still only have 1 zero
i also dont get as to where we edit and input these numbers weird

ok nvm i got it =)

Ok new question i got a problem here when i click main unit after opening cheatengine.bpg
it doesnt show me the CE GUI all i get is this box full other optins and stuff that i did any suggestions or help ?

[jerrison]

i think your suppose to burn that file with magiciso or something and install it, read what it saids in microsoft word ... okay i done what it ask to install iam stuck now in this part -----------> 2A. Changing the basics and manipulating //hideme

Find driver.dat in your main CE Source and open in notepad. <----- where do i find the driver.dat? zzz this tut really need pics


but i have isobuster man.... just when i click install DDK it doesnt pop up the set up -.-:cry:

[XxK3v1NxX]

you burn the installation file to a disk ... i dont think your suppose to install the ddk when you downloaded it, just burn it right away

damn im still looking for some tut pics on this ... the ones on the site are over bandwidth or something anybody have saved tut pics? =[

[fr0stee]

Just compress the ISO file in winRar, and you can open the rar from there, if it just has the .iso file in there, then go to settings >> Integration tab [X] ISO.

[SoccerGoalie]

Now search and replace the following in all files. Set mask as " *.* ". (Include Subfolders)

*
dbk32.sys >> string.sys
*
dbk32.dll >> string.dll



My resultss are different than his. Does anyone know why? I used Actual search and replace and mine are different. All my settings are the same as his but yet i get different results.

Ok the solution is at http://www.mpcforum.com/showthread.php?t=141185&page=10

[dire-x]

Awwww man I'm at the last step and its giving me these File not found errors:
[RC Error] trainer.rc(4): Cannot open file: trainer.exe
[Warning] cheatengine.dpr(79): File not found: 'ChangeValuefrm.dfm'
and severeal other errors/warnings that are for a bunch of files that I have in my cheat engine delphi folder. I am posotive I have done everything correctly up to this point, what do I do to fix this?!

[TheGod]

Build
[Error] xinghe.dpr(1): Declaration expected but identifier 'dbk32' found
[Warning] xinghe.dpr(18): File not found: 'ahlibrary.res'
[Error] xinghe.dpr(21): Undeclared identifier: 'xingherox'
[Error] xinghe.dpr(22): Undeclared identifier: 'xinghe4'
[Error] xinghe.dpr(23): Undeclared identifier: 'xinghe5'
[Error] xinghe.dpr(24): Undeclared identifier: 'xinghe6'
[Error] xinghe.dpr(25): Undeclared identifier: 'xinghe7'
[Error] xinghe.dpr(26): Undeclared identifier: 'xinghe8'
[Error] xinghe.dpr(27): Undeclared identifier: 'xinghe9'
[Error] xinghe.dpr(28): Undeclared identifier: 'xinghe10'
[Error] xinghe.dpr(29): Undeclared identifier: 'xinghe11'
[Error] xinghe.dpr(30): Undeclared identifier: 'xinghe12'
[Error] xinghe.dpr(31): Undeclared identifier: 'xinghe13'
[Error] xinghe.dpr(32): Undeclared identifier: 'xinghe14'
[Error] xinghe.dpr(33): Undeclared identifier: 'xinghe15'
[Error] xinghe.dpr(34): Undeclared identifier: 'xinghe16'
[Error] xinghe.dpr(35): Undeclared identifier: 'xinghe17'
[Error] xinghe.dpr(36): Undeclared identifier: 'xinghe18'
[Error] xinghe.dpr(37): Undeclared identifier: 'xinghe19'
[Error] xinghe.dpr(38): Undeclared identifier: 'xinghe20'
[Error] xinghe.dpr(39): Undeclared identifier: 'xinghe21'
[Error] xinghe.dpr(40): Undeclared identifier: 'xinghe22'
[Error] xinghe.dpr(41): Undeclared identifier: 'xinghe23'
[Error] xinghe.dpr(42): Undeclared identifier: 'xinghe24'
[Error] xinghe.dpr(43): Undeclared identifier: 'xinghe25'
[Error] xinghe.dpr(44): Undeclared identifier: 'xinghe26'
[Error] xinghe.dpr(45): Undeclared identifier: 'xinghe27'
[Error] xinghe.dpr(46): Undeclared identifier: 'xinghe28'
[Error] xinghe.dpr(47): Undeclared identifier: 'xinghe29'
[Error] xinghe.dpr(48): Undeclared identifier: 'xinghe30'
[Error] xinghe.dpr(49): Undeclared identifier: 'xinghe31'
[Error] xinghe.dpr(50): Undeclared identifier: 'xinghe32'
[Error] xinghe.dpr(51): Undeclared identifier: 'xinghe33'
[Error] xinghe.dpr(52): Undeclared identifier: 'xinghe34'
[Error] xinghe.dpr(53): Undeclared identifier: 'xinghe35'
[Error] xinghe.dpr(54): Undeclared identifier: 'xinghe36'
[Error] xinghe.dpr(55): Undeclared identifier: 'xinghe37'
[Error] xinghe.dpr(56): Undeclared identifier: 'xinghe38'
[Error] xinghe.dpr(57): Undeclared identifier: 'xinghe39'
[Error] xinghe.dpr(58): Undeclared identifier: 'xinghe40'
[Error] xinghe.dpr(59): Undeclared identifier: 'xinghe41'
[Error] xinghe.dpr(60): Undeclared identifier: 'xinghe42'
[Error] xinghe.dpr(62): Undeclared identifier: 'xinghe43'
[Error] xinghe.dpr(63): Undeclared identifier: 'xinghe44'
[Error] xinghe.dpr(64): Undeclared identifier: 'xinghe45'
[Error] xinghe.dpr(65): Undeclared identifier: 'xinghe46'
[Error] xinghe.dpr(67): Undeclared identifier: 'xinghe47'
[Error] xinghe.dpr(68): Undeclared identifier: 'xinghe48'
[Error] xinghe.dpr(70): Undeclared identifier: 'xinghe49'
[Error] xinghe.dpr(72): Undeclared identifier: 'xinghe50'
[Error] xinghe.dpr(73): Undeclared identifier: 'xinghe51'
[Error] xinghe.dpr(75): Undeclared identifier: 'xinghe52'


this the error i got when compiling the xinghe.dpr..which is the string.dpr mentioned.. wad do i do>?

anyone help thx

[xJaaaaason]

i'm stuck on 3H...i couldn't find syndic.com/ce, CheatEngine or cheat engine...it said nothing was found when i tried to replace them. i also couldn't find cheatengine.bpg. instead i opened cheat engine and then opened mainunit but when i looked for tried to find scan type it said no results found. if anybody could answer my questions it was be great.

[silly]

YTou did your strings wrong. Redo them (aka, restart0

[HellcatcherXD]

i am stuck on 3I .. setting up the form.

that where i got a problem, when i double click on Main Unit, the cheatengine GUI doesn't appear on my screen, only a whole bunch of code in a window...

any1 know who to fix this??

[dire-x]

Has onyone actually been able to make a succesful UCE that has pointers and everything? If no one has I think I'm going to stop trying...
3 failed attempts straight in a row...

[icedexer]

hi there everyone and im new at this uce thing and i REALLY NEED HELP plz plz plz im beggin everyone plz u have NO IDEA how bad i want to get uce to work and know how to use it ive literally tried about a million things from one tut to another and NO help what so ever. ive taken a look over this one and its wonderful i think i could really understand it but i just need a lil help gettin started so plz everyone i just need a lil help IVE DOWNLOADED EVERY FILE THAT WAS POSTED ON THE SITE THAT I NEED. Like first off...how am i supposed to install this new uce i dont know how too ive looked over the file a MILLION times and no installation program. so what am i suppoed to do with that. and 2nd the "Daemon Tools" file like it says it should be ver. 3.24 but the one on the link is 4.06 sumptin like that so plz what am i supposed to do with it and when i try to install ver.4.06 it says and i quote "this plateform is not supported" unno what this is suppoes to mean....plz plz JUST SUMONE plz help me out and another thing is that like when ur supposed to run that "Windows XP Free Build Enviromet" i dont know where to find that i followed the guide and like its not in the "Developments Kit" and like i dont know what to do nemore plz i WANT to have it so bad ive tried everything plz plz PLEASE sumone just help me, guide me please and if u have msn its better cause then i can add u and then u can guid me with out havin to go thro trouble or sumone just point me in the rite direction please oh please lord sumone......

[smallkid]

Quote:
Originally Posted by BP878
Now search and replace the following in all files. Set mask as " *.* ". (Include Subfolders)

*
dbk32.sys >> string.sys
*
dbk32.dll >> string.dll

My resultss are different than his. Does anyone know why? I used Actual search and replace and mine are different. All my settings are the same as his but yet i get different results.
`````````````````````````````````````````````````` ````````````````````````
so what's the answer to this question? can u type or copy and paste the answer :(

[wtfbleh]

this is GFG i succesfully made it however my pointers still won't work lols n e 1 got clues?

[corechink]

CAUTiON: extremely long post
but some stuff you needa know:

- there are new detected strings as of the most current revision of gayguard, the latest dreaded number 783. i might be talking sh!t, but that's what i think is makin all the UCE-makers all unhappy faced like this:

:[

other than that, here are the solutions to the problems posted in the past 9 hours. took me a good one hour and a half to post this :] now that's spending some quality time with the computer haha.

trinity1643 [page 21] about pics on the tut

in the case that you can't see the pictures on the tut, download these pics i saved when they did show. it's finally approved, so you can just download it and look. numbered, but probably not arranged in any specific order. no viruses or trojans, etc. i hope xl just kidding.

EDIT: just kidding again

soccergoalie [page 21] spaces as replacement for string

nope, it'd be illegal i think. and don't be lazy! there are detected replacements, like string or c4n0n. maybe the space is probably detected too, so i wouldn't risk it just for making it a simpler process.

jerrison [page 21] installing ddk free build

first, download the .iso file correctly without any problems. instead of burning the disk and then installing it with that, i suggest downloading the DAEMON Tools [latest version, 32 bit] and install it. then, when you launch it, there should be a red thunderbolt on your taskbar. right click on it, hover over Virtual CD/DVD-ROM, then click on mount image. select the .iso file. then, it should run the ddk installation. if not, go to my computer and just run it from there . then that's it! only install the ddk file, not KMDF.

evan.n [page 21] i dunno what the problem is

define your problem more clearly please.

herrkung [page 22] cracking delphi 7

keep trying different serial numbers. and make sure you're running from the file called 'setup' in the delphi7e folder that you extracted. that's what i did and it worked smoothly. when you read this, good morning.

XxK3v1nxX [page 22] notepad-ding driver.dat

first, you'll find driver.dat in your main ce directory [cheat engine delphi]. make sure you put it directly in your C:/ drive. then, once you know where it is, go open up notepad. go to file, open... and find driver.dat. then follow the directions on the tut.

MPCNUB [page 22] the unlocatable bajesus CE gee-you-eye

there are different ways of dealing with this. keep in mind your CE GUI is somewhere out there, and you gotta make it come to you or you have to look for it.

[I]method numbeeerrr ONE: extend your resolution a little higher [mine goes to 1280 x 1024]. once you open up MainUnit, it should be on the bottom right corner there hiding.

method numbeeerrr TWO: bring that bizzotch to you. click on mainunit, look under object inspector, scroll down until you see "Left" and change that value to 228. and it'll magically zoom to you.

dire-x [page 22] problem with something at the end?

i'll just assume you're stuck on compiling cheatengine.exe. the only thing i could help you with is to download trainerwithassembler.exe and slap it in your main ce directory. credits to the great J-C.

let's all say thank you to J-C [trainerwithassembler.exe] (http://forum.cheatengine.org/download.php?id=1949)

apparently, i think the renaming word document thing was a mistake or something, it just doesn't work because it isn't a real .exe file, but a word file. from J-C's upload, that's a real .exe file. so props to him.

TheGod [page 22] compiling string.dpr [i can't solve this!]

as it says, if you have an error, you gotta recheck your steps or possibly restart it. be aware of new strings, so if you do restart it, search and replace the old strings in the TUT and the new detected strings for rev 783 from gayguard. seems you're not the god [haha just kidding buddie]. sorry.

xJaaaaason [page 22] steps 3G/H/I

first, there is a typo in the tut i'd like to declare. instead of syndic.com/ce, it should be syndiv.com/ce. put that in the search tense and replace with your website of choice. then cheatengine and cheat engine should be locatable. remember when you're looking for cheatengine and cheat engine your mask is *.pas. as for looking for cheatengine.bpg, when you open up the file with delphi, on the drop-down menu beneath file name, view only .dpr and .bpg files. then, there should be two files called cheatengine. right click on the second one and view properties. it should be the one by borland project group. if it is, then open it. if not, then it's the first cheatengine. check it. if that is borland project group, then open it. refer to MPCNUB's problem in this same post to locate the unlocatable CE GUI.

hellcatcherXD [page 22] locating the CE gee-you-eye

refer to MPCNUB's problem in this same post to locate the unlocatable CE GUI.

icedexer [page 22] listen, buddie...

fragments are raping your post. write in english, put some sentences together. and ask nicely, not in some long beg colored in blue. if you ask formally and nicely, i'd be glad to help you. same with what J-C says earlier, be nice when you're asking for help. don't act like a leecher [or a one who distinguishes himself very obnoxiously]. and plus, i found 6 'like's, again, use english please. and don't be so desperate, everybody is dealing with problems for making this uce work, too. and last of all, read every damn post in this thread. how many times do i have to say it? i'm sorry for flamin', but gosh darn read every post before you ask for something! it makes the thread all junky. i think it's in the rules too. i hope you learned something, icedexer and all the other people out there.

PS sorry for the attitude x[

smallkid [page 23] string.sys and string.dll

uhm... check your steps? make sure you got everything right and your search and replace have all the correct settings, like:

- setting the mask as *.*
- including subfolders [under the options tab]

if it's still different, it wouldn't hurt to modify all anyways? and if something goes wrong, you could always start over. no matter how tedious it is, keep in mind it's easier done the second or third or fourth or fifth or sixth or last-finite-numbered try. haha good luck.

wtfbleh [page 23] still not working uce

maybe there are new strings? gayguard keeps updating itself so it's hard to keep up. replace the new detected strings. so that means start over haha. sorry for the bad news :/



and that's all. i'm sleepy
good luck, hackers!

[Akumax]

can anyone help me out with this error? [Fatal Error] XXXXEngine.res(1): Program or unit 'XXXXEngine.res' recursively uses itself. I have no idea what needs to be fix for it. Any help would be appreciated.

[eestlane]

3I. Configuring the Cheat Engine GUI

Open cheatengine.bpg from main CE directory. Using Project Manager, open MainUnit which is under Cheatengine.exe. Double clicking on it will make the Cheat Engine GUI pop up.

the GUI engine dosnt pop up. any1 knows whats wrong?
nvm found it thx to corechinks post

[Herrkung]

corechink hmm ive tried now about 7 times or something like that and still its not accepting the code. And do I have to crack it later with daemon tools?

edit: on the first word I had wrote 6ATK instead of 6AKT my dad saw it and now its working. Thx for all ur help :)

[eestlane]

http://img324.imageshack.us/img324/8017/1233211235nz.jpg (http://imageshack.us)
any1 has a idea what can be wrong?

[VIS]

I'm at part: 3J. Comping cheatengine.exe


I want to change the errors, i i'm positive that i'm useing the good String.
But i still get back at the first error. Maybe there is a code missing? This is what i get:

kallocs[0].address:=dword(mystring50)(x);


Have i to over write more with this string or is this correct?
Thnx in advance!

[HellcatcherXD]

i am in 3J,

when i compile cheatengine.exe, there 2 error that the tut didn't said about
http://img333.imageshack.us/img333/7450/img0010wu.jpg (http://imageshack.us)

and this

http://img310.imageshack.us/img310/7650/img0011jl.jpg (http://imageshack.us)


any1 know how to fix it?

[J-C]

http://img324.imageshack.us/img324/8017/1233211235nz.jpg (http://imageshack.us)
any1 has a idea what can be wrong?
you messed up somewhere big time my friend wtf are you doing with mainunit2.pas opened o.O lmao follow the tut i think your screwed XD u edited the wrong files >_< OMFG why?

can anyone help me out with this error? [Fatal Error] XXXXEngine.res(1): Program or unit 'XXXXEngine.res' recursively uses itself. I have no idea what needs to be fix for it. Any help would be appreciated.
lol you didnt follow the tut correctly you didnt make sure you were on XXXXXEngine.exe you were on XXXXX.res instead LMAO come on man it even warns you about that on the tut

[Herrkung]

Im having problem with 3J
View project manager and click on the drop down menu. Make sure Cheatengine.exe is selected and NOT cheatengine.DEU / NLD / RUS

Minimize Delphi real quick, and with windows explorer, go to your main CE folder. Right click in any empty space and select New > Text Document. Rename the file as "trainerwithassembler.exe" Done.

Now go back to Delphi and compile. Here is the another long step (but on the brighter side... YOU ARE VERY CLOSE TO FINISHING!!).

After you attempt to compile, you WILL get errors. The first will be

[Error] autoassembler.pas(531): Undeclared identifier: 'KernelAlloc'

Hopefully you wrote down your changes on a piece of paper like I had asked. Look back at that paper and change KernelAlloc to whatever you changed it to. In this tut, I changed KernelAlloc to String50.
------------------------------

I dont get any error but i think im not doing the trainerwithassembler correct cause it says something about that file

[shaDeh]

Does anyone mind explaining this to me?! I don't quiet understand what I have to do



-------------------------
3E. Renaming NewKernelHandler and CeFuncProc

Open up cheatengine.dpr from your Main CE folder. Go to project manager and open up NewKernelHandler.pas and CeFuncProc.pas Again "File > Save As". Save into main CE folder.

NewKernelHandler.pas >> StringHandler.pas (replace? Yes!)
CeFuncProc.pas >> String55.pas-
--------------------------

[sonnypwnsu]

i need help when i get to the Step 2D i copied my directory C:\Cheat Engine Delphi\Cheat Engine Delphi\DBKKernel and opened Windowns Xp Free Build i type "cd C:\Cheat Engine Delphi\Cheat Engine Delphi\DBKKernel" and press enter it does not do anything it just repeat my dicrectory C:\Cheat Engine Delphi\Cheat Engine Delphi\DBKKernel

[evil-side]

thx but inthe step to save the file with name string it says error? why?

[dhruvin917]

This Is Soooooooooooooooooooooooo... Bad It Dose Not Help Me At All Half The Stuff Is Just Wrong On What The Guy Says And Well It Dose Not Work Thats All, And This Is Not Noob Friendly It Pisses Noobs Off Like Me!!!

[Herrkung]

This Is Soooooooooooooooooooooooo... Bad It Dose Not Help Me At All Half The Stuff Is Just Wrong On What The Guy Says And Well It Dose Not Work Thats All, And This Is Not Noob Friendly It Pisses Noobs Off Like Me!!!

Im not really noob but im not pro and I think its a good tut but some steps i think like 2 steps are hard and i cant understand. Im not done yet im on 3J and im stuck there ;) If u find any noob friendlier tut tell me

[icedexer]

Ok well fist off, im sorry for the way i Acted choreChink, ok well let me start over again. Alrite well i am having Problems with the UCE and i really need help with it. So I would Appritiate it choreChink if you would help me out with it, because you seeem to know lots about it and oh yea, dont worry about the attitude I understand. And the reason i had it long and in blue was well first off it was my first post on this EVER and I put it in blue because I just wanted to catch someones attention cause i really want to get this working. Ok so ill ask nicley like u said.....Will You Please Help Me Out With My UCE? Please and thank you.

[sexidrpapi11]

Well, I just started using this TUT today, but for some reason I cant see any of the screen shots. It seems like i need them, cuz i can't get through one of the steps. If anyone can post them or.... Message me on AIM i guess. my sn is Hideunderfear. Find me Pl0x

[THeBestPerson]

nice job man its about time i make a new UCE ive used the one i had since beta lol thanks

[Avis]

Umm... Im finished ~~~>>>>> Now my points will work? 0.0

[Herrkung]

Do you get d/c or computer reboot?

[nassim]

ok, i get frustrated. i cant install delphi7!!! when im extracting, it does an error. after that, i press install and it says: ''Cannot find delphi7.msi'' why it cant find it????
please help me i just need to install it... >.>
what can be the problem, Thank you.

[hiw98]

http://img.photobucket.com/albums/v418/lilbudbud03/untitled2.jpg
http://img.photobucket.com/albums/v418/lilbudbud03/untitled1.jpg
http://img.photobucket.com/albums/v418/lilbudbud03/untitled-1.jpg

Those are my problems, does anyone know how to help me out?.

[hunterkk1]

hihi where can download CE

[xJaaaaason]

i'm stuck on 3g...i modified all the strings except syndic.com/ce..it says it cant find it...but i can find all the rest of the strings..anybody have a clue how to fix this? answers appreciated!

i'm also stuck on 3i. i opened cheatengine.bpg. then i clicked project manager..and i saw cheatengine.exe..i expanded that. then i saw main unit and double clicked it (i did not expand main unit again) i dont think GUI popped up, it just says mainunit.pas

[UberMaster]

it cant find syndic.com/ce cuz its Syndiv.com/ce (correct me if im wrong)

hiw98, I'm willing to help, but I can't, man those screenshots are small

[ispeakenglish89]

in 4B, how do you view source for cheatengine.exe since when i open cheatengine.bpg nothing pops up but the borland program

[xJaaaaason]

Minimize Delphi real quick, and with windows explorer, go to your main CE folder. Right click in any empty space and select New > Text Document. Rename the file as "trainerwithassembler.exe" Done.

What does it mean with windows explorer? Cause I right clicked any empty space, then named it trainerwithassembler.exe and then I went back to delphi and compiled cheatengine but I didn't get this error[Error] autoassembler.pas(531): Undeclared identifier: 'KernelAlloc'....I got [RC Error] trainer.rc(4): Cannot open file:trainerwithassembler.exe....please help. answer appreciated!

[kree5t0f0r]

in 4B, how do you view source for cheatengine.exe since when i open cheatengine.bpg nothing pops up but the borland program


go to View --> Project Manager --> CheatEngine.exe --> right click then view source

[UberMaster]

Minimize Delphi real quick, and with windows explorer, go to your main CE folder. Right click in any empty space and select New > Text Document. Rename the file as "trainerwithassembler.exe" Done.

What does it mean with windows explorer? Cause I right clicked any empty space, then named it trainerwithassembler.exe and then I went back to delphi and compiled cheatengine but I didn't get this error[Error] autoassembler.pas(531): Undeclared identifier: 'KernelAlloc'....I got [RC Error] trainer.rc(4): Cannot open file:trainerwithassembler.exe....please help. answer appreciated!


You have to have that you can edit the Extensions of files....

In windows Explorer:

Extra > Folder Options (or something like that, I have Dutch Windows) > The second tab > Check for something like "Hide Extensions for known Program files" > unthick that

Now you should see

trainerwithassembler.exe.txt

Remove the .txt part > done

[deadfly]

thanks very useful but the pictures aren't there anymore

[nassim]

I would like some one to answear my question.
i cant install delphi7. at the end of the extraction, it does an error.
after, i press the setup, it starts but after it says that delphi7.msi is not found in Delphi7.By.HeCTOr.FWBz.
I would apreciate it if some one helps me.

Thank you

[xJaaaaason]

yay thank you. i fixed it. but now...another problem -____- on the bottom it says
[Error] onesoulhandler.pas(1): 'UNIT' expected but 'PROGRAM' found
[Fatal Error] onesoul55.pas(17): Circular unit reference to 'onesoul55'

(onesoul is my string)
help! answers appreciated!

[kree5t0f0r]

hi. i made my uce, but when i attach maple, my comp restarts when i am putting in my PIN. i have the new strings that were mentioned on this topic: the CTL_CODE, NtOT, RewriteKernel32, RestoreKernel32, InitializeDrive, GetWin32KAddress, and GetDriverVersion. I used the newest CE Sourse that was posted in here too, and the 'trainerwithassembler.exe' zip in here too. i successfully made it, but it wont let me hack becuz it restarts my computer when i get to the PIN imput area. HELP PLZ? advice is really appreciated.

[ispeakenglish89]

[RC Error] trainer.rc(4): Cannot open file: trainerwithassembler.exe
[RC Fatal Error] trainer.rc(1): Compile
[Warning] cheatengine.dpr(4): File not found: 'trainer.res'
[Error] File not found: 'trainer.res'

This is what i get after i tried changing all the errors in 3J. does anyone know what i'm doing wrong?

[thepostman0]

RC Error] trainer.rc(4): Cannot open file: trainerwithassembler.exe
[RC Fatal Error] trainer.rc(1): Compile
[Warning] cheatengine.dpr(4): File not found: 'trainer.res'
[Fatal Error] whatever55.pas(17): File not found: 'whatever.dcu'

what do i need to change? i dun understand from here i need to compile cheat engine then it gives me this
-yeah i ahve the same questiona s this guy, ive bene looking aroudnt his thread, but I can't find an answer, uit's pissing me off a lot. stupid rc error crap cant open my file or whatevear

ahha shoot, didn't see that post ahead of mine, sorry

[Herrkung]

You have to have that you can edit the Extensions of files....

In windows Explorer:

Extra > Folder Options (or something like that, I have Dutch Windows) > The second tab > Check for something like "Hide Extensions for known Program files" > unthick that

Now you should see

trainerwithassembler.exe.txt

Remove the .txt part > done

Where do I find windows explorer? I also have this problem.

[eestlane]

yea i know smthing was messed up bad :P o well ill start again tomorrow XD it took me till 3 am to get this far n i was tired n probly messed smthing up. anywayz thx for sayin that i have to start over :D

[xJaaaaason]

where are you J-C? i miss you :( i need help from you!!!

[Herrkung]

Jason u got 3J working i saw so can u help me to find windows explorer?

[kree5t0f0r]

Jason u got 3J working i saw so can u help me to find windows explorer?


windows explorer is just your operating system. when it says minimize it just meens to your desktop.

[Herrkung]

windows explorer is just your operating system. when it says minimize it just meens to your desktop.

But thoose settings with extra >> Folderoptions and that. That's what I need help with.

[nassim]

I would like some one to answear my question.
i cant install delphi7. at the end of the extraction, it does an error.
after, i press the setup, it starts but after it says that delphi7.msi is not found in Delphi7.By.HeCTOr.FWBz.
I would apreciate it if some one helps me.

Thank you

[thepostman0]

alright, i made my UCE. but I ahve some questions, and I ebt they're posted sumwhere else but i cant find them... What are the current correct settings for your own made UCE? and how do we do the update with the newest strings deals??

[xJaaaaason]

CTL_CODE
NtOT
RewriteKernel32
RestoreKernel32
InitializeDriver
GetWin32KAddress
GetDriverVersion

are those the only new strings we have to modify? and do we modify them the same way we did the old ones?

[thepostman0]

How do we edit them, do we have to compile or w/e again? aug tut plox

[THeBestPerson]

good stuff

this is the best tutorial so far makes me happy congratz on getting stickied

[ispeakenglish89]

[RC Error] trainer.rc(4): Cannot open file: trainerwithassembler.exe
[RC Fatal Error] trainer.rc(1): Compile
[Warning] cheatengine.dpr(4): File not found: 'trainer.res'
[Error] File not found: 'trainer.res'

does anyone know what's wrong?

[xJaaaaason]

Can one of you pro hackers please help me? :( I compiled cheatengine gui and i got:
[Error] onesoulhandler.pas(1): 'UNIT' expected but 'PROGRAM' found
[Fatal Error] onesoul55.pas(17): Circular unit reference to 'onesoul55'
they are both in black. if you have answers please please please tell me :(
thank you.

[MewTrainer]

[RC Error] trainer.rc(4): Cannot open file: trainerwithassembler.exe
[RC Fatal Error] trainer.rc(1): Compile
[Warning] cheatengine.dpr(4): File not found: 'trainer.res'
[Error] File not found: 'trainer.res'

does anyone know what's wrong?

I have the same exact error.
I know this is my first post, and I'm just another noob, but, FOR GOD SAKE PPL READ PREVIOUS POSTS.
There are like 25 pages and most of them have the same questions repeated over and over again. Ppl that can actually help, like J-C, will end up tired and not even answering on this topic if you don't stop the spamming.
I know it takes its time to check all the pages whenever u have an error, but posting because its easier doesn't help ppl with different problems that haven't been answered (like the error mentioned in the quote which still doesn't have a solution I think)
I kno typing this was probably pointless, but I wanted to say it.
Btw, excellent job to the guy that made the guide and special thnx to ppl that kindly helps noobs with their problems (or should I say "our"?)
And: HALP ME PLZZZ ON MY PROB (sarcasm lol)

[thepostman0]

I made my own UCE, but I need the corect settings, and what to do with the new detectde strings

[grizzly92]

this guide is good. i have just made my uce but i have one problem. when ever i open maple story and then try to target maplestory in process list everything seems normal and then after the splash screen goes away nothing happens. maple like doesnt load but im not getting any restarts any1 know the problem? help will be appreciated thx.

[HellcatcherXD]

omg... i am stuck on the last step 4B...T.T

what is this??

[Fatal Error] SoulantEngine.dpr(109): File not found: 'reinit.dcu'

[grizzly92]

hellcatcher are there other errors? cause when i tried to compile i had a few errors plus a fatal error then once i fixed the minor errors the fatal error didnt show up.

[hackerthehacker]

http://img115.imageshack.us/img115/3324/untitledsmall7ei.png

help me =(

[HellcatcherXD]

hellcatcher are there other errors? cause when i tried to compile i had a few errors plus a fatal error then once i fixed the minor errors the fatal error didnt show up.

NOPE ONLY1

[grizzly92]

umm hackerthehacker 1.183> ur spose to put cd then a actual space without the "[ ]" so it shud be the stuff then 1.183>cd then put ur dbkkernel directory here.

[hackerthehacker]

ohhh lol XD I knew it had something to do with the space

ugh more bugs:
1:http://img55.imageshack.us/my.php?image=14jo.png
2:http://img55.imageshack.us/my.php?image=20zd.png


2 is the top, 1 is the bottom, in between those 2 is copies of the thing that starts with NMAKE

[icegrillz]

umm i got this error for 3B trying to compile the dpr

http://img65.imageshack.us/img65/9882/ddassd3bh.jpg

[trinity1643]

:dead: :dead: :dead: :dead: :dead: :dead: :dead: hey evry1 need help

since ur a noob helper wanted to ask if u could help me so I put Delphi and all of the programs in a folder that u can create in XP well ya i did that then i open the driver.dat in notepad and change them to
cheater1
cheater2
cheater3
cheater4.sys

and click save and i reopen it and it saved nothing so i try to save as and i cant get in folder even if i explor it still will not let me save

[RC Error] trainer.rc(4): Cannot open file: trainerwithassembler.exe
[RC Fatal Error] trainer.rc(1): Compile
[Warning] cheatengine.dpr(4): File not found: 'trainer.res'
[Error] File not found: 'trainer.res'

does anyone know what's wrong?



kinda sux anyways postin i know i am spamming anyones helpers take these off gotta make a real important PM so need 15 posts this # 3

[NazT]

nvm solved my prblem

[Jensio]

ummmmmmm the second link doesnt work for me..the CEsource...>_>;; someone help me with this

[Herrkung]

I get this error when im trying to compile 3J [Fatal error]t4g9hengine.dpr(7): File not found ‘t4g9h55.dcu’

t4g9h is my string as u see.

[Dixon258]

nice xD

[NazT]

okay, now that i have completed making my own UCE. how do i make my own cheat table?

[UberMaster]

I really dont know, And my ability's to help keep getting smaller...

This is a Message to you all:

READ BACK! GEEZ! THERE ARE 27 PAGES OF THE ERRORS YOU GUYS HAVE! THE MOST OF THEM ARE ALREADY HELPED, THE SOLUTION IS THERE ALREADY!

DON'T BE A DAMN NOOB AND JUST OPEN A THREAD AND TYPE "I DONT KNOW THIS", I GET THAT ERROR"... THIS THREAD IS EXPANDING WITH 2 PAGE'S A DAY.... WITH SPAM!

READ BACK BEFORE YOU POST!.... WE DO HAVE A SEARCHBUTTON....



My 2 penny's

Starx

[pl45m4]

When I try compiling in the DDK, i get a MS-DOS error and completely throws everything off. SO my .sys was never created. Can anyone please provide a solution besides the search button (which I already tried)

[Herrkung]

I really dont know, And my ability's to help keep getting smaller...

This is a Message to you all:

READ BACK! GEEZ! THERE ARE 27 PAGES OF THE ERRORS YOU GUYS HAVE! THE MOST OF THEM ARE ALREADY HELPED, THE SOLUTION IS THERE ALREADY!

DON'T BE A DAMN NOOB AND JUST OPEN A THREAD AND TYPE "I DONT KNOW THIS", I GET THAT ERROR"... THIS THREAD IS EXPANDING WITH 2 PAGE'S A DAY.... WITH SPAM!

READ BACK BEFORE YOU POST!



My 2 penny's

Starx

Ive read almost all pages and I think I havent seen my prob somewhere else so check my post higher up on this page.

[YonaMan]

Thanks.

[UberMaster]

can you provide at what step you are Herrkung?... If Its step 4B, make sure you have selected Cheatengine.exe AND NOT CHEATENGINE.RUS > make sure you save the files in the main directory, I had this error too

BTW... .dcu

isnt that Reinit.dcu?

[Herrkung]

Its 3J

[UberMaster]

What I said: Read the 2 lines underneath "3J. Comping cheatengine.exe"

MAKE SURE ITS CHEATENGINE.EXE (AND MAKE SURE YOU SAVE ALL YOUR STUFF IN THE MAIN FOLDER IF IT SAYS SO) I got pissed off when I got this error, half hour later I looked closely to it and saw it was in the wrong folder

EDIT: yay! I can PM people! 15 posts! My mother is gonna be so proud! XD

[Herrkung]

I did that but I still get that error >.< U know what ive doing wrong before?

[UberMaster]

You have renamed reinit.dcu(or something like that?) Cuz I dont think that's something you have/need to do

[jety]

I made the UCE.. with the strings in this tut..
pointers are not working =/

what now?

[J-C]

I give up i helped most of the people and you noobs dont read at all if you want help someone else is gonna have to give it to you cause you dont know how to browse and search goddamn

[nassim]

I restarted it 6 times now and i still get this ERROR damit!!! help me please
[error]nassim.dpr(21): Undeclared identifier: 'nassim4'
[error]nassim.dpr(22): Undeclared identifier: 'nassim5'
[error]nassim.dpr(23): Undeclared identifier: 'nassim6'
[error]nassim.dpr(24): Undeclared identifier: 'nassim7'

I get this error for all the strings damit....
Please help!
btw, this is step 3b when im compiling.. i wonder whats the problem, i retried 6 times already

[Psydude]

Is that tut still up to date?
there arn't rev 783 strings in it..

[UncleSam]

--------------------------------------------------------------------------------

Minimize Delphi real quick, and with windows explorer, go to your main CE folder. Right click in any empty space and select New > Text Document. Rename the file as "trainerwithassembler.exe" Done.
Now go back to Delphi and compile

When I made the "trainerwithassembler.exe" document it worked and all but when i go back to compile i get this error: //first compile the standalone project to generate the needed trainer.exe
//it is recommended to compress the standalone before release so the generated
//trainers don't become so big
TRAINER CEINCEXE "trainerwithassembler.exe"

TRAINER CEINCEXE "trainerwithassembler.exe" is highlighted in red and the error it says is:[RC error]trainer.rc(4): cannot open file:trainerwithassembler.exe


Ok, now I'm getting (after I fixed all errors) [Error]File not found: 'trainer.res'
Thanks for help in advance.

[ViperCute]

i get TRAINER CEINCEXE "trainer.exe"
why is that? can someone help me i have done all the rest right up to now i think

[Herrkung]

You have renamed reinit.dcu(or something like that?) Cuz I dont think that's something you have/need to do
I dont really understand. Can you explain more clearly?

[s0m3b0dy]

ok i got up to the part where i compile the file that has all of the modifed string names, but when i try to recompile this is what i get

[error]string.dpr[21]:undeclared identifier: 'VQE1'


note that the "string" as i put it on the quote is really what i named the file(something else) and the "vqe1" is what i renamed the string. the only way i dont get an error for it is if i leave it at the original name of VQE if any1 can help me out here it wuold be much appreciated.


3B. Now we will get to saving newkernelhandler.pas, DBK32functions.pas, and DBK32.dpr in new names.

Open the above 3 named files in Delphi. Newkernelhandler is found in your main directory. The other 2 files are found in your DBK32 folder. Once opened. Go File > Save As.

*
DBK32.dpr >> String.dpr (Save in dbk32 folder. Also you will see that "library DBK32" has changed to "library string")
*
DBK32functions.pas >> Stringfunctions.pas (Save in dbk32 folder. In Project Manager, DNK32functions.pas will change to stringfunctions.pas)
*
New KernelHandler.pas >> Stringfunctions.pas (Save in main CE folder.)

Save all and close all.

Now search and replace the following in all files. Set mask as " *.* ". (Include Subfolders)

*
dbk32.sys >> string.sys
*
dbk32.dll >> string.dll


where he says to "save as", when i do that, for some reason it doesent overwrite the "old" file, it just creates a new file with the name that i put in. is this right?

[janemba001]

Very noob friendly BUT IM NOT GOING AHEAD UNTIL I CAN SEE THE PICS. HOW COME I CANT SEE THE PICS T.T

[drkcatalyst]

Ok here's my problem.

I'm trying to follow the guide but it asks me to do it like the screenshot. However the screenshots aren't working for me because it says "bandwith exceeded." The part im stuck on is during the free build. 2 questions. 1) when it says paste address is the address like "C:\Documents and Settings\jean\My Documents\diskdrove\Cheat Engine Delphi" or like "C:\Documents and Settings\jean\My Documents\diskdrove\Cheat Engine Delphi\dbkkernel" and 2) what's that 3rd step that says "Now Type in "ce" as in screen shot 3 and then press enter. Hopefully you will get something like the last screen shot." Screenie would be helpful if not to inconvenient. Thx in advance

NVM i got itXDXD

kk im havin a problem with delphi... Authorization code etc... now what? Thx. plz dun flame cuz im a total noob at this...

Ok this is for u janemba... I can't pm yetXD.
You don't actually need the screenies there ARE wordsXD.
I just didn't get that part. As for my questions, the answers were WITH the dbkkernel in the address, and just add ce after that
...

pffffft stupid me ok ignore all my questions from now on ill check around before askin

[liquidbuddy]

Yeah.. I need help. When i try to comply <name>.dpr
I get this error

[Error] roflfunctions.pas(98): Previous declaration of 'Rofl11' was not marked with the 'overload' directive

Can anyone help me?

[jerrison]

[Error] MainUnit.pas(1242): Too many actual parameters
[Error] MainUnit.pas(1242): Too many actual parameters
[Error] MainUnit.pas(1492): Too many actual parameters
[Error] MainUnit.pas(1492): Too many actual parameters
[Fatal Error] unrandomizer.pas(28): Could not compile used unit 'mainunit'

i got this error but how do i fix? plz help (im in last part compiling cheatengine)

[xJaaaaason]

I read 13 pages so far. Sorry, but i've gotten so impatient, i couldnt find what i was looking for so im gonna ask the pro hackers..what do i do with these new strings?:
CTL_CODE
NtOT
RewriteKernel32
RestoreKernel32
InitializeDriver
GetWin32KAddress
GetDriverVersion
are they the only ones that are new? and also i opened cheatengine.bpg (nothing showed up but delphi)
then in my main ce file i right clicked cheatengine.exe but i dont see view source...
please help and sorry for asking...(by the way, thats 4B)

ok now i read 20 pages

[dizboycraz]

wen it says to "compile" wat does that mean...could any 1 explain...

[b00r]

ok, i made my own uce but i still have 2 problems:

- i cant open cheat tables cuz it gives me an error "This is not a valid "my engines name" engine table" so i have to insert the adresses manually every time.

- my computer keeps restarting, i did everything i needed to do as said in the tutorial (delete DBK32.sys and DBK32.dll (which i cant even find)) i even deleted the entire work map so i only have:

-nameengine.exe
-driver.dat
-name.sys
-name.dll
-stealth.dll
-cehook.dll
-systemcallsignal.exe
-systemcallretriever.exe
-kernelmoduleunloader.exe

please reply cuz i've spent hours and hours of frustrating work to this ...

[corechink]

READ THIS POST

this was one of my recent posts, and reading from all the posts since i've been away from the computer, it's become obvious that some people aren't reading all the posts.

CAUTiON: extremely long post
but some stuff you needa know:

- there are new detected strings as of the most current revision of gayguard, the latest dreaded number 783. i might be talking sh!t, but that's what i think is makin all the UCE-makers all unhappy faced like this:

:[

other than that, here are the solutions to the problems posted in the past 9 hours. took me a good one hour and a half to post this :] now that's spending some quality time with the computer haha.

trinity1643 [page 21] about pics on the tut

in the case that you can't see the pictures on the tut, download these pics i saved when they did show. it's finally approved, so you can just download it and look. numbered, but probably not arranged in any specific order. no viruses or trojans, etc. i hope xl just kidding.

EDIT: just kidding again.

soccergoalie [page 21] spaces as replacement for string

nope, it'd be illegal i think. and don't be lazy! there are detected replacements, like string or c4n0n. maybe the space is probably detected too, so i wouldn't risk it just for making it a simpler process.

jerrison [page 21] installing ddk free build

first, download the .iso file correctly without any problems. instead of burning the disk and then installing it with that, i suggest downloading the DAEMON Tools [latest version, 32 bit] and install it. then, when you launch it, there should be a red thunderbolt on your taskbar. right click on it, hover over Virtual CD/DVD-ROM, then click on mount image. select the .iso file. then, it should run the ddk installation. if not, go to my computer and just run it from there . then that's it! only install the ddk file, not KMDF.

evan.n [page 21] i dunno what the problem is

define your problem more clearly please.

herrkung [page 22] cracking delphi 7

keep trying different serial numbers. and make sure you're running from the file called 'setup' in the delphi7e folder that you extracted. that's what i did and it worked smoothly. when you read this, good morning.

XxK3v1nxX [page 22] notepad-ding driver.dat

first, you'll find driver.dat in your main ce directory [cheat engine delphi]. make sure you put it directly in your C:/ drive. then, once you know where it is, go open up notepad. go to file, open... and find driver.dat. then follow the directions on the tut.

MPCNUB [page 22] the unlocatable bajesus CE gee-you-eye

there are different ways of dealing with this. keep in mind your CE GUI is somewhere out there, and you gotta make it come to you or you have to look for it.

[I]method numbeeerrr ONE: extend your resolution a little higher [mine goes to 1280 x 1024]. once you open up MainUnit, it should be on the bottom right corner there hiding.

method numbeeerrr TWO: bring that bizzotch to you. click on mainunit, look under object inspector, scroll down until you see "Left" and change that value to 228. and it'll magically zoom to you.

dire-x [page 22] problem with something at the end?

i'll just assume you're stuck on compiling cheatengine.exe. the only thing i could help you with is to download trainerwithassembler.exe and slap it in your main ce directory. credits to the great J-C.

let's all say thank you to J-C [trainerwithassembler.exe] (http://forum.cheatengine.org/download.php?id=1949)

apparently, i think the renaming word document thing was a mistake or something, it just doesn't work because it isn't a real .exe file, but a word file. from J-C's upload, that's a real .exe file. so props to him.

TheGod [page 22] compiling string.dpr [i can't solve this!]

as it says, if you have an error, you gotta recheck your steps or possibly restart it. be aware of new strings, so if you do restart it, search and replace the old strings in the TUT and the new detected strings for rev 783 from gayguard. seems you're not the god [haha just kidding buddie]. sorry.

xJaaaaason [page 22] steps 3G/H/I

first, there is a typo in the tut i'd like to declare. instead of syndic.com/ce, it should be syndiv.com/ce. put that in the search tense and replace with your website of choice. then cheatengine and cheat engine should be locatable. remember when you're looking for cheatengine and cheat engine your mask is *.pas. as for looking for cheatengine.bpg, when you open up the file with delphi, on the drop-down menu beneath file name, view only .dpr and .bpg files. then, there should be two files called cheatengine. right click on the second one and view properties. it should be the one by borland project group. if it is, then open it. if not, then it's the first cheatengine. check it. if that is borland project group, then open it. refer to MPCNUB's problem in this same post to locate the unlocatable CE GUI.

hellcatcherXD [page 22] locating the CE gee-you-eye

refer to MPCNUB's problem in this same post to locate the unlocatable CE GUI.

icedexer [page 22] listen, buddie...

fragments are raping your post. write in english, put some sentences together. and ask nicely, not in some long beg colored in blue. if you ask formally and nicely, i'd be glad to help you. same with what J-C says earlier, be nice when you're asking for help. don't act like a leecher [or a one who distinguishes himself very obnoxiously]. and plus, i found 6 'like's, again, use english please. and don't be so desperate, everybody is dealing with problems for making this uce work, too. and last of all, read every damn post in this thread. how many times do i have to say it? i'm sorry for flamin', but gosh darn read every post before you ask for something! it makes the thread all junky. i think it's in the rules too. i hope you learned something, icedexer and all the other people out there.

PS sorry for the attitude x[

smallkid [page 23] string.sys and string.dll

uhm... check your steps? make sure you got everything right and your search and replace have all the correct settings, like:

- setting the mask as *.*
- including subfolders [under the options tab]

if it's still different, it wouldn't hurt to modify all anyways? and if something goes wrong, you could always start over. no matter how tedious it is, keep in mind it's easier done the second or third or fourth or fifth or sixth or last-finite-numbered try. haha good luck.

wtfbleh [page 23] still not working uce

maybe there are new strings? gayguard keeps updating itself so it's hard to keep up. replace the new detected strings. so that means start over haha. sorry for the bad news :/



and that's all. i'm sleepy
good luck, hackers!


okay, this post was in freakin page 23 about 3/4 days ago. and a little message right now:

READ EVERY DAMN POST!

if there are any more people after this who keep posting questions and beg even though the answer would be there if they searched hard enough in this thread, i'm gonna report them. remember these rules, friends!

Do NOT beg/ask for hacks!
If we see a user asking for a hack rather than searching for it with the MPC Search we will warn/ban him and close/delete the thread without warning! Saying that you searched and that you're not begging is still not an excuse to make a thread in which you ask for a hack. This general rule applies: If you can't find it using the search/threadlist it's not possible or has not been made yet, so there would be no point in asking.

Give detailed explanations of your problems!
If you have a problem with a hack and you ask for help in a new/existing thread, nobody can help you if you only say: "I start the hack and it doesn't work! Please help!". Give more detail on what you have tried, what error you get and what the program doesn't do right.

and if you need any help, PM me [if it is possible, but if not, just ask right here]. my e-mail is corechink@hotmail.com

P.S. sorry icedexer, i was away from the computer for a time.

P.S.S. i'll try to help to the best of my ability to answer people's questions AFTER this post.

P.S.S.S. there's a thread that allows you to hack more easily w/o you having to make your own UCE. i haven't tried it, but it's the post by benthomas24 named [Settings] Bypassing your UCE. by reading the comments and praises, it seems your endless searching has ended. go check it out, it's stickied. huge props to him.

[Herrkung]

Since no1 explained so i could understand i will post it again.

I get this error [Fatal error]t4g9hengine.dpr(7): File not found ‘t4g9h55.dcu’ when im trying to compile 3J

[evil-side]

no pics where it?

[Herrkung]

I cant see the pics either now. To many ppls looking on that page.

[spartan1990]

i made 2 and they dont work, suck it

[Herrkung]

then u did wrong. make a new one...

[mehn]

are there um..any screenshots on the page? The TUT often tells me to refer to screenshot 3 or w/e and i dont see any..

[s0m3b0dy]

i fixed up the problems that i was having so now im lmost done :) i read a couple posts form people so i though i would help out by answering a couple questions.



"are there any screenshots?"

no apparently they have been taken down from the site. please stop spamming asking some1 to post up the screenshots, as no1 has them and if they did im sure they would have posted them by now.

"undeclared identifier"
if you are getting this error while trying to compile then you are doing the previous step wrong. i got this error because i though i had to change this on my string.dps file, but you have to change it ALL on the search and w/e program. put everything like the tut says, on the "to search" tab put in the "name" of the string as it originally was, for example for the first one, VQE, you would put in VQE for the "to search" tab and on the "replace or w/e" you would put in the name of your string(the name you are changing all the files to). DONT FORGET TO CLICK THE "MODIFY ALL" BUTTON NEXT TO THE SEARCH BUTTON UNDER THE "REPLACE TO" TAB. IF YOU DONT THEN IT WILL NOT CHANGE ANYTHING.
also, pay attention and DO NOT mess up on the naming. if you name 2 different strings to the same new name, then you will have to start all over, unless you record where everysingle sring shows up and change them manually, but this would probrably be even harder.


"what is compile?"
it is an option on the menus on the top of the program. you dont have to make it any more complex then it is, just do as the program says.

[mehn]

Sorry, I rechecked this thread and found the screen shots. So far I'm on the part with Delphi...finally figured out how to get the authorization code. =D

ok...problem...when i went to compile in delphi i got like..500 errors....um...yea.

now what?

and ummm..when i was find and replacing all the stuffs like
VQE
OP
OT
NOP
RPM
WPM
VAE
CreateRemoteAPC
ReadPhysicalMemory
WritePhysicalMemory
GetPhysicalAddress
GetPEProc...

and so on. was i supposed to call them all the same thing? cause i called them all the word ive been using for all ym strings and stuffs.

[xJaaaaason]

ok i read ALL the pages...took me about 45 mins....are these the only new strings?
CTL_CODE
NtOT
RewriteKernel32
RestoreKernel32
InitializeDriver
GetWin32KAddress
GetDriverVersion
if not can u tell me all of the ones i have to replace? and also how do i replace them? (by actual search and replace?)

[s0m3b0dy]

ok i read ALL the pages...took me about 45 mins....are these the only new strings?
CTL_CODE
NtOT
RewriteKernel32
RestoreKernel32
InitializeDriver
GetWin32KAddress
GetDriverVersion
if not can u tell me all of the ones i have to replace? and also how do i replace them? (by actual search and replace?)


maybe if you tried reading the directions you would see there is a shitload of things to change. and read 2 posts up where i said how to change strings... you obviously didnt read all the posts.

VQE
OP
OT
NOP
RPM
WPM
VAE
CreateRemoteAPC
ReadPhysicalMemory
WritePhysicalMemory
GetPhysicalAddress
GetPEProcess
GetPEThread
ProtectMe
UnprotectMe
IsValidHandle
GetCR4
GetCR3
SetCR3
GetSDT
GetSDTShadow
setAlternateDebugMethod
getAlternateDebugMethod
DebugProcess
StopDebugging
StopRegisterChange
RetrieveDebugData
GetThreadsProcessOffset
GetThreadListEntryOffset
GetDebugportOffset
GetProcessnameOffset
StartProcessWatch
WaitForProcessListData
GetProcessNameFromID
GetProcessNameFromPEProcess
GetIDTCurrentThread
GetIDTs
MakeWritable
GetLoadedState
ChangeRegOnBP
DBKSuspendThread
DBKResumeThread
DBKSuspendProcess
DBKResumeProcess
KernelAlloc
GetKProcAddress
Protect2
test
useIOCTL
DBKGetDC

change all of the above...

we need people to stop wanting to be spoonfeed all the time...

[xJaaaaason]

dude i said NEW STRINGS....and i did read dude...those are the old strings

i completely made my UCE but it isnt working and im guessing its because of all the new strings...so i need all the new ones

[nassim]

hey s0m3b0dy i pressed Modify selected after each string and at the end i didnt press modify all so this is my problem??
if yes well thx for answearing

[icedexer]

Its alrite choreChink but as you were away from the computer i put up another post i think it was on page 23 or something like that. so if you wouldn't mind go back and read it because thats where i asked for help the way you told me to. So thanks for everything.

[corechink]

okay, so here are the pictures. since people don't freaking read any of the previous posts,

HERE ARE THE PICTURES

EDIT: just kidding

since some *****s apparently don't read the posts that help them, i'll put the sn i'm responding in big letters so you can read 'em all nice and neat, okay? i agree with s0m3b0dy, we don't need to spoonfeed ya guys.

nassim
of course you modify all. for almost every step, you must modify all. HOWEVER, there are certain exceptions in the tut that tells you NOT to modify all, only modify selected. and yes, that is your problem. you're f'king screwed cause you have to do it all over again w/ the new strings

icedexer
i wanna help you but it'll take a lot of time unless you pm me or e-mail me. i need 4 more posts 'til i get the pm privilege xP

[s0m3b0dy]

gettin a bunch of errors that the guide doesent mention while compiling CE.exe..

[Error] autoassembler.pas(654): ')' expected but identifier 'C4B567' found
[Error] autoassembler.pas(660): Assignment to FOR-Loop variable 'i'
[Error] autoassembler.pas(756): 'END' expected but 'FINALLY' found
[Error] autoassembler.pas(757): Missing operator or semicolon
[Error] autoassembler.pas(762): EXCEPT or FINALLY expected
[Fatal Error] MainUnit.pas(11): Could not compile used unit 'autoassembler.pas'


any help??

[hard trying but]

gettin a bunch of errors that the guide doesent mention while compiling CE.exe..



any help??

Well I gave up making my UCE long before(maybe a month or two) cuz I got the same errors like the above mentionned and got no support(I followed many TUTs and made 4 Different UCEs).
SO I LEECHED DD and TE.

I remember gettin the errors like
-"<<something>> expected but <<something>> found
-"missing semicolom or..."
-an error saying control something.

Anyway, in general, i also need help with the same errors, so I can start makin my UCE again.
THANKS IN ADVANCE.somebody plz help us.

[Kafro]

The only reason the pics dont work on sites is because too many people viewed the pictures which caused "bandwidth limit for this site has been exceeded."

[drkcatalyst]

I'm having a problem with the GUI part. I've redone it over 5 times and always I get stuck here. I open up the cheatengine.exe and the MainUnit.pas. It looks just like every other thing i've opened in delphi. I try to find scan type, value type, w/e and it won't find it. I just try compiling it and it says [Fatal Error] MemoryBrowserFormUnit.pas(352): Could not compile used unit 'AddAddress.pas' and [RC Fatal Error] trainer.rc(1): Compile and [RC Error] trainer.rc(4): Cannot open file: trainerwithassembler.exe. I did make the trianerwithassembler.exe text document but still... If some of this is in previous posts plz tell me which page my comp is too slow and i read a few pages and im a bit impatient. I rly appreciate any help anyone can give.

[xJaaaaason]

change ur resolution to make everything smaller...than u will see GUI bottom right corner

[drkcatalyst]

i dun get what ur saying... everything of mine is small as possible...

screenie would be nice...

I'm jus gonna start over ...AGAIN

[flamehunter]

Thanks to corechink for the UCE TUT pics (page 29, the post with the big red letters). I'm still working on the UCE, but i should be getting it soon. No problems yet :)

[corechink]

drkcatalyst
maybe you're not looking hard enough, id1ot. try looking at the long a*s post on page 28. don't be lazy, man.

MPCNUB [page 22] the unlocatable bajesus CE gee-you-eye

there are different ways of dealing with this. keep in mind your CE GUI is somewhere out there, and you gotta make it come to you or you have to look for it.

method numbeeerrr ONE: extend your resolution a little higher [mine goes to 1280 x 1024]. once you open up MainUnit, it should be on the bottom right corner there hiding.

method numbeeerrr TWO: bring that bizzotch to you. click on mainunit, look under object inspector, scroll down until you see "Left" and change that value to 228. and it'll magically zoom to you.

dire-x [page 22] problem with something at the end?

i'll just assume you're stuck on compiling cheatengine.exe. the only thing i could help you with is to download trainerwithassembler.exe and slap it in your main ce directory. credits to the great J-C.

trainerwithassembler.exe (http://forum.cheatengine.org/download.php?id=1949)

apparently, i think the renaming word document thing was a mistake or something, it just doesn't work because it isn't a real .exe file, but a word file. from J-C's upload, that's a real .exe file. so props to him.

use one of the methods to locate the CE GUI. instead of the word documented trainerwithassembler.exe, use the one i have up there ^ and put it in your ce directory. easy. next time, read all the posts no matter what.

and you're very welcome flamehunter. i hope your name has no meaning xl haha.

[xJaaaaason]

can somebody tell me exactly EVERY SINGLE string i need to change? new and old...cause i know that there's WAY more than whats on the tutorial.
please and thank you.

[corechink]

xJaaaaason

look for it. you people are so damn lazy. here's all the answers to your questions:

http://www.mpcforum.com/search.php

LOOK FOR IT.

OLD and NEW STRINGS

# Name___________________
1 CEDRIVER53
2 DBKProclist53
3 DBKThreadList53
.sys dbk32.sys
4 VQE
5 OP
6 OT
7 NOP
8 RPM
9 WPM
10 VAE
11 CreateRemoteAPC
12 ReadPhysicalMemory
13 WritePhysicalMemory
14 GetPhysicalAddress
15 GetPEProcess
16 GetPEThread
17 ProtectMe
18 UnprotectMe
19 IsValidHandle
20 GetCR4
21 GetCR3
22 SetCR3
23 GetSDT
24 GetSDTShadow
25 setAlternateDebugMethod
26 getAlternateDebugMethod
27 DebugProcess
28 StopDebugging
29 StopRegisterChange
30 RetrieveDebugData
31 GetThreadsProcessOffset
32 GetThreadListEntryOffset
33 GetDebugportOffset
34 GetProcessnameOffset
35 StartProcessWatch
36 WaitForProcessListData
37 GetProcessNameFromID
38 GetProcessNameFromPEProcess
39 GetIDTCurrentThread
40 GetIDTs
41 MakeWritable
42 GetLoadedState
43 ChangeRegOnBP
44 DBKSuspendThread
45 DBKResumeThread
46 DBKSuspendProcess
47 DBKResumeProcess
48 KernelAlloc
49 GetKProcAddress
50 Protect2
51 test
52 useIOCTL
53 DBKGetDC
___________________________________

54 CTL_CODE
55 NtOT
56 RewriteKernel32
57 RestoreKernel32
58 InitializeDriver
59 GetWin32KAddress
60 GetDriverVersion

and probably more. since it's not my concern, really, i'm not gonna look for them. here's a good thread to look at:

http://www.mpcforum.com/showthread.php?t=142362

credits:
newest strings by J-C

2 more posts til pm privilege! and i'll get back to you icedexer once i get it.

[drkcatalyst]

Oh yes corechink i found that before you decided to flame me I just had to go to the park...rly i did. thnx anyway for providing the info.

[youyou._]

i need help -.- .... i'm stuck in the step 2.D . When i try to compile string.sys, it says
1 file compiled
'built' is not recognized as an internal or external order

can someone help me plz and thnx

[drkcatalyst]

Ok I'm about to go to sleep, so it's not that im being REALLY lazy by not searching through all 30 pages. I found some topics already like my question but none answered so far. If you feel like answering my question then thanks, otherwise don't flame plz, it doesn't help. Ok hear it is: Just to clear up, if the error says it can't find "" then it means it's in the wrong folder right? if not please clarify. Thanks

[Neiltwo2]

nice one, just finished mine, pm me if you want it

[eestlane]

ive done it 2x times now n both times they got detected XD

[darkcrafter]

xJaaaaason

look for it. you people are so damn lazy. here's all the answers to your questions:

http://www.mpcforum.com/search.php

LOOK FOR IT.

OLD and NEW STRINGS

# Name___________________
1 CEDRIVER53
2 DBKProclist53
3 DBKThreadList53
.sys dbk32.sys
4 VQE
5 OP
6 OT
7 NOP
8 RPM
9 WPM
10 VAE
11 CreateRemoteAPC
12 ReadPhysicalMemory
13 WritePhysicalMemory
14 GetPhysicalAddress
15 GetPEProcess
16 GetPEThread
17 ProtectMe
18 UnprotectMe
19 IsValidHandle
20 GetCR4
21 GetCR3
22 SetCR3
23 GetSDT
24 GetSDTShadow
25 setAlternateDebugMethod
26 getAlternateDebugMethod
27 DebugProcess
28 StopDebugging
29 StopRegisterChange
30 RetrieveDebugData
31 GetThreadsProcessOffset
32 GetThreadListEntryOffset
33 GetDebugportOffset
34 GetProcessnameOffset
35 StartProcessWatch
36 WaitForProcessListData
37 GetProcessNameFromID
38 GetProcessNameFromPEProcess
39 GetIDTCurrentThread
40 GetIDTs
41 MakeWritable
42 GetLoadedState
43 ChangeRegOnBP
44 DBKSuspendThread
45 DBKResumeThread
46 DBKSuspendProcess
47 DBKResumeProcess
48 KernelAlloc
49 GetKProcAddress
50 Protect2
51 test
52 useIOCTL
53 DBKGetDC
___________________________________

54 CTL_CODE
55 NtOT
56 RewriteKernel32
57 RestoreKernel32
58 InitializeDriver
59 GetWin32KAddress
60 GetDriverVersion

and probably more. since it's not my concern, really, i'm not gonna look for them. here's a good thread to look at:

http://www.mpcforum.com/showthread.php?t=142362

credits:
newest strings by J-C

2 more posts til pm privilege! and i'll get back to you icedexer once i get it.

wow nicley done and yea we are lazzy can u blame us? anyway thats koool^^ hmm dudes if anyone can help me personaly with the ce problems i got cuz im going nuts so plz contact me

[mehn]

im stuck on part 3, string editing...in dbk32.dpr there are only the old strings in it..how do i get the new strings to show so i can change them as well?

[Mugan]

yea no pics =( ive been tryin to make one..but i get errors...

[akumquat]

ok well i want to make my own uce but now the pictures on the site dont work.. what should i do?

[drkcatalyst]

PICTURES: Check page 29 corechink has a post on it already.

ok I have my own question. My engine keeps blue screening, and the guide says to kill stuff. Just wondering is it ok to delete EVERYTHING except the folder i've put my engine and stuff into? Thx.

Ok I tried deleting everything EXCEPT my folder with CEhook.dll, driver.dat, ceprotect.dat, kerneldata.dat, kernelmoduleunloader, plx.sys (my string is plx, feel free to tell me if it's detectedXD), plx.dll, stealth.dll, plxengine, systemcallsignal/retriever. This time it blue screened before I even pressed "start game." Plz help if possible.

[jasoncboy]

any one?

[CheatTillCaught]

Help? This is what I get when I try to compile falen.dll


EDIT: This is what the fisrt 15 look like


exports fallen4;//VirtualQueryEx;
exports fallen5;//OpenProcess;
exports fallen6;//OpenThread
exports fallen7;//NtOpenProcess;
exports fallen8;//ReadProcessMemory;
exports fallen9;//WriteProcessMemory;
exports fallen10; //VirtualAllocEx
exports fallen11;
exports fallen12;
exports fallen13;
exports fallen14;
exports fallen15;



[Error] fallen.dpr(21): Undeclared identifier: 'fallen4'
[Error] fallen.dpr(22): Undeclared identifier: 'fallen5'
[Error] fallen.dpr(23): Undeclared identifier: 'fallen6'
[Error] fallen.dpr(24): Undeclared identifier: 'fallen7'
[Error] fallen.dpr(25): Undeclared identifier: 'fallen8'
[Error] fallen.dpr(26): Undeclared identifier: 'fallen9'
[Error] fallen.dpr(27): Undeclared identifier: 'fallen10'
[Error] fallen.dpr(28): Undeclared identifier: 'fallen11'
[Error] fallen.dpr(29): Undeclared identifier: 'fallen12'
[Error] fallen.dpr(30): Undeclared identifier: 'fallen13'
[Error] fallen.dpr(31): Undeclared identifier: 'fallen14'
[Error] fallen.dpr(32): Undeclared identifier: 'fallen15'
[Error] fallen.dpr(33): Undeclared identifier: 'fallen16'
[Error] fallen.dpr(34): Undeclared identifier: 'fallen17'
[Error] fallen.dpr(35): Undeclared identifier: 'fallen18'
[Error] fallen.dpr(36): Undeclared identifier: 'fallen19'
[Error] fallen.dpr(37): Undeclared identifier: 'fallen20'
[Error] fallen.dpr(38): Undeclared identifier: 'fallen21'
[Error] fallen.dpr(39): Undeclared identifier: 'fallen22'
[Error] fallen.dpr(40): Undeclared identifier: 'fallen23'
[Error] fallen.dpr(41): Undeclared identifier: 'fallen24'
[Error] fallen.dpr(42): Undeclared identifier: 'fallen25'
[Error] fallen.dpr(43): Undeclared identifier: 'fallen26'
[Error] fallen.dpr(44): Undeclared identifier: 'fallen27'
[Error] fallen.dpr(45): Undeclared identifier: 'fallen28'
[Error] fallen.dpr(46): Undeclared identifier: 'fallen29'
[Error] fallen.dpr(47): Undeclared identifier: 'fallen30'
[Error] fallen.dpr(48): Undeclared identifier: 'fallen31'
[Error] fallen.dpr(49): Undeclared identifier: 'fallen32'
[Error] fallen.dpr(50): Undeclared identifier: 'fallen33'
[Error] fallen.dpr(51): Undeclared identifier: 'fallen34'
[Error] fallen.dpr(52): Undeclared identifier: 'fallen35'
[Error] fallen.dpr(53): Undeclared identifier: 'fallen36'
[Error] fallen.dpr(54): Undeclared identifier: 'fallen37'
[Error] fallen.dpr(55): Undeclared identifier: 'fallen38'
[Error] fallen.dpr(56): Undeclared identifier: 'fallen39'
[Error] fallen.dpr(57): Undeclared identifier: 'fallen40'
[Error] fallen.dpr(58): Undeclared identifier: 'fallen41'
[Error] fallen.dpr(59): Undeclared identifier: 'fallen42'
[Error] fallen.dpr(60): Undeclared identifier: 'fallen43'
[Error] fallen.dpr(62): Undeclared identifier: 'fallen44'
[Error] fallen.dpr(63): Undeclared identifier: 'fallen45'
[Error] fallen.dpr(64): Undeclared identifier: 'fallen46'
[Error] fallen.dpr(65): Undeclared identifier: 'fallen47'
[Error] fallen.dpr(67): Undeclared identifier: 'fallen48'
[Error] fallen.dpr(68): Undeclared identifier: 'fallen49'
[Error] fallen.dpr(70): Undeclared identifier: 'fallen50'
[Error] fallen.dpr(72): Undeclared identifier: 'fallen51'
[Error] fallen.dpr(73): Undeclared identifier: 'fallen52'
[Error] fallen.dpr(75): Undeclared identifier: 'fallen53

[iono hack]

Omfg The Site With The Tut Sh!t, I Was Ognna Sue It To Make My Own Uce But Newbs Pissed Off The Guy Ad He Took Down The Directions!!!! Did Any1 By Any Chance Savea Copy Of Those Directions?!?!?!?!?!

Can Som1 Plz Tell Me The Directions Asap!! Im So Pissed. I Was Gonna Start This Project And I Alredy Got All The Tools. I Had To Restart My Comp After Installing Something I Go To The Site And Bam Its Gone!!

[YoPoI]

mm.. in step 3I.
-Double clicking on it will make the Cheat Engine GUI pop up.
when i double click on it i dont see the Cheat Engine GUI i see this.. :HERE: (http://img312.imageshack.us/img312/474/screeen7le.png)

[youyou._]

thats g@y we cant see the pictures >_> and im stuck in the part 2. D please help me -.- i'm so pissed off cauz it's g@y playing maplestory without hacks!

[CheatTillCaught]

If anyone still has the webite up with the tut copy and paste what it says into word then please repaste onto mpc or pm it to meh =P!

[drkcatalyst]

yopoI, You have the same problem I had. Check page 30 there's a post by corechink flamin meXD.

Ok I have my own problem I'd love to restate from my former post. I believe my strings are being detected, true. Ok so if I delete everything xcept that folder, it's still detected. If I delete plx.sys, I can get all the way to my choose server screen, and there will be no blue screen, but my comp will still restart. I'm not really sure what the problem is. Can someone help me? Thanks

O and also I tried deleting ceprotect.dat and kerneldata.dat after this, and then recreating them, but when i try to recreate kerneldata.dat through systemcallretriever it says no driver. Ok thanks for any help anyone can give

[YoPoI]

If anyone still has the webite up with the tut copy and paste what it says into word then please repaste onto mpc or pm it to meh =P!
here u are.. open the htm file ant BooM..:shocked: the TuT :ha:

[coolnammy1]

first off.. fcuk you kkkkk for spamming my site on MPC. i appreciate that you do call it the best so far cuz I worked hard on it. but thanks to people like you, my free bandwidth has exceeded.

to the noobs. YES THIS DAMM TUTORIAL WORKED. you guyz didnt use your damm common sense to figure out that new strings were being added. also you didnt read the damm details. i recorded every step i did down. thank you for trying. if it didnt work then too bad. i really have no sympathy now because my whole dam site is down.

that better not be my tut yopoi.



to MODs: DO NOT APPROVE THAT FILE. I DO NOT GIVE PERMISSION FOR ANYBODY TO RECOPY MY TUTORIAL. it will get ugly if you approve that. it will not get ugly by itself. but i will make it ugly.

edit: ----------------------------------

i have calmed down now. sorrying for cursing at you kkkkk. i still do not give approval for that file by yopoi. legal action can and will be taken if it is approved. i will be happy to put it back up if someone is willing to give me free bandwidth from their host. something way over 100mb

[CheatTillCaught]

here u are.. open the htm file ant BooM..:shocked: the TuT :ha:

Awsome!!! Now I just gotta wait approval thanks!:rambo:

first off.. fcuk you kkkkk for spamming my site on MPC. i appreciate that you do call it the best so far cuz I worked hard on it. but thanks to people like you, my free bandwidth has exceeded.

to the noobs. YES THIS DAMM TUTORIAL WORKED. you guyz didnt use your damm common sense to figure out that new strings were being added. also you didnt read the damm details. i recorded every step i did down. thank you for trying. if it didnt work then too bad. i really have no sympathy now because my whole dam site is down.



to MODs: DO NOT APPROVE THAT FILE. I DO NOT GIVE PERMISSION FOR ANYBODY TO RECOPY MY TUTORIAL. it will get ugly if you approve that. i will make it that way.


Heyyyyy Its you haha looks as if someone is happy but neways why hate?

[coolnammy1]

i will be happy to put it back up if someone is willing to give me free bandwidth from their host. something way over 100mb

[CheatTillCaught]

Hmm...If I can get you some bandwidth would you put it back up and explain in more detail as to why the compling part of string.dll gets so many errors?

[coolnammy1]

Hmm...If I can get you some bandwidth would you put it back up and explain in more detail as to why the compling part of string.dll gets so many errors?


you prolly messed up somewhere. try redoing it from the beginning. the new strings that have been detected were not added to the forum. it would help if you had a little background in programming.

[CheatTillCaught]

This is what I get when I try to compile falen.dll

This is what the fisrt 15 look like in my fallen.dpr

I might have done this wrong...

exports fallen4;//VirtualQueryEx;
exports fallen5;//OpenProcess;
exports fallen6;//OpenThread
exports fallen7;//NtOpenProcess;
exports fallen8;//ReadProcessMemory;
exports fallen9;//WriteProcessMemory;
exports fallen10; //VirtualAllocEx
exports fallen11;
exports fallen12;
exports fallen13;
exports fallen14;
exports fallen15;


And these are the errors


[Error] fallen.dpr(21): Undeclared identifier: 'fallen4'
[Error] fallen.dpr(22): Undeclared identifier: 'fallen5'
[Error] fallen.dpr(23): Undeclared identifier: 'fallen6'
[Error] fallen.dpr(24): Undeclared identifier: 'fallen7'
[Error] fallen.dpr(25): Undeclared identifier: 'fallen8'
[Error] fallen.dpr(26): Undeclared identifier: 'fallen9'
[Error] fallen.dpr(27): Undeclared identifier: 'fallen10'
[Error] fallen.dpr(28): Undeclared identifier: 'fallen11'
[Error] fallen.dpr(29): Undeclared identifier: 'fallen12'
[Error] fallen.dpr(30): Undeclared identifier: 'fallen13'
[Error] fallen.dpr(31): Undeclared identifier: 'fallen14'
[Error] fallen.dpr(32): Undeclared identifier: 'fallen15'
[Error] fallen.dpr(33): Undeclared identifier: 'fallen16'
[Error] fallen.dpr(34): Undeclared identifier: 'fallen17'
[Error] fallen.dpr(35): Undeclared identifier: 'fallen18'
[Error] fallen.dpr(36): Undeclared identifier: 'fallen19'
[Error] fallen.dpr(37): Undeclared identifier: 'fallen20'
[Error] fallen.dpr(38): Undeclared identifier: 'fallen21'
[Error] fallen.dpr(39): Undeclared identifier: 'fallen22'
[Error] fallen.dpr(40): Undeclared identifier: 'fallen23'
[Error] fallen.dpr(41): Undeclared identifier: 'fallen24'
[Error] fallen.dpr(42): Undeclared identifier: 'fallen25'
[Error] fallen.dpr(43): Undeclared identifier: 'fallen26'
[Error] fallen.dpr(44): Undeclared identifier: 'fallen27'
[Error] fallen.dpr(45): Undeclared identifier: 'fallen28'
[Error] fallen.dpr(46): Undeclared identifier: 'fallen29'
[Error] fallen.dpr(47): Undeclared identifier: 'fallen30'
[Error] fallen.dpr(48): Undeclared identifier: 'fallen31'
[Error] fallen.dpr(49): Undeclared identifier: 'fallen32'
[Error] fallen.dpr(50): Undeclared identifier: 'fallen33'
[Error] fallen.dpr(51): Undeclared identifier: 'fallen34'
[Error] fallen.dpr(52): Undeclared identifier: 'fallen35'
[Error] fallen.dpr(53): Undeclared identifier: 'fallen36'
[Error] fallen.dpr(54): Undeclared identifier: 'fallen37'
[Error] fallen.dpr(55): Undeclared identifier: 'fallen38'
[Error] fallen.dpr(56): Undeclared identifier: 'fallen39'
[Error] fallen.dpr(57): Undeclared identifier: 'fallen40'
[Error] fallen.dpr(58): Undeclared identifier: 'fallen41'
[Error] fallen.dpr(59): Undeclared identifier: 'fallen42'
[Error] fallen.dpr(60): Undeclared identifier: 'fallen43'
[Error] fallen.dpr(62): Undeclared identifier: 'fallen44'
[Error] fallen.dpr(63): Undeclared identifier: 'fallen45'
[Error] fallen.dpr(64): Undeclared identifier: 'fallen46'
[Error] fallen.dpr(65): Undeclared identifier: 'fallen47'
[Error] fallen.dpr(67): Undeclared identifier: 'fallen48'
[Error] fallen.dpr(68): Undeclared identifier: 'fallen49'
[Error] fallen.dpr(70): Undeclared identifier: 'fallen50'
[Error] fallen.dpr(72): Undeclared identifier: 'fallen51'
[Error] fallen.dpr(73): Undeclared identifier: 'fallen52'
[Error] fallen.dpr(75): Undeclared identifier: 'fallen53
__________________

[Inevitable]

I have a question concerning Delphi 7.. I Have Downloaded it and I am trying to run it but when I try to run it, it says I need to register when I do I put in the same serial number I did the first time but it doesnt work... Can any 1 help me?

[coolnammy1]

all the strings were not fully replaced. some of the originals still exist

inevitable: you can juss keep it unregistered and it will still work

[CheatTillCaught]

-_- you cant install a program...

[Inevitable]

How do i keep it unregistered? all it allows me to do is Register or exit and when I exit it closes it completely

[CheatTillCaught]

all the strings were not fully replaced. some of the originals still exist


I dont quite understand because you say to stop at dbkstopdc
and when I checked again this is where the whole thing stops

exports fallen4;//VirtualQueryEx;
exports fallen5;//OpenProcess;
exports fallen6;//OpenThread
exports fallen7;//NtOpenProcess;
exports fallen8;//ReadProcessMemory;
exports fallen9;//WriteProcessMemory;
exports fallen10; //VirtualAllocEx
exports fallen11;
exports fallen12;
exports fallen13;
exports fallen14;
exports fallen15;
exports fallen16;
exports fallen17;
exports fallen18;
exports fallen19;
exports fallen20;
exports fallen21;
exports fallen22;
exports fallen23;
exports fallen24;
exports fallen25;
exports fallen26;
exports fallen27;
exports fallen28;
exports fallen29;
exports fallen30;
exports fallen31;
exports fallen32;
exports fallen33;
exports fallen34;
exports fallen35;
exports fallen36;
exports fallen37;
exports fallen38;
exports fallen39;
exports fallen40;
exports fallen41;
exports fallen42;
exports fallen43;

exports fallen44;
exports fallen45;
exports fallen46;
exports fallen47;

exports fallen48;
exports fallen49;

exports fallen50;

exports fallen51;
exports fallen52;

exports fallen53;


begin
randomize;
end.

[besthalohitman]

Seems to have some errors in the dbkproclist any ideas?

[CheatTillCaught]

How do i keep it unregistered? all it allows me to do is Register or exit and when I exit it closes it completely

Hit register agree to the thing then when it gives you 4 choices hit dont register.

[Inevitable]

Do I need to use the serial number again because when i hit next it asks me for the serial number O.o.... and if not tell me what I need to be opening

~Ty

[CheatTillCaught]

My serial nuber was there already just put in the oringial one o.O

[drkcatalyst]

says im missing driver...help plx. whenever i try to run any of them it says Im missing the driver...

[Inevitable]

When I do it says Serial number Invalid for this version..When i used it to begin with and it worked... O.o

[coolnammy1]

i am posting this again incase the mod did not see it before

first off.. fcuk you kkkkk for spamming my site on MPC. i appreciate that you do call it the best so far cuz I worked hard on it. but thanks to people like you, my free bandwidth has exceeded.

to the noobs. YES THIS DAMM TUTORIAL WORKED. you guyz didnt use your damm common sense to figure out that new strings were being added. also you didnt read the damm details. i recorded every step i did down. thank you for trying. if it didnt work then too bad. i really have no sympathy now because my whole dam site is down.

that better not be my tut yopoi.



to MODs: DO NOT APPROVE THAT FILE. I DO NOT GIVE PERMISSION FOR ANYBODY TO RECOPY MY TUTORIAL. it will get ugly if you approve that. it will not get ugly by itself. but i will make it ugly.

edit: ----------------------------------

i have calmed down now. sorrying for cursing at you kkkkk. i still do not give approval for that file by yopoi. legal action can and will be taken if it is approved. i will be happy to put it back up if someone is willing to give me free bandwidth from their host. something way over 100mb

there are also my screenshots on ph 29 by corechink. i request that you take it down mod. legal action can be taken against that due to me not giving consent.

as for cheattillcaught: for help, lok on pg 29. "somebody" left an explanation on how to fix your problem

[dabestplayer]

i am posting this again incase the mod did not see it before



there are also my screenshots on ph 29 by corechink. i request that you take it down mod. legal action can be taken against that due to me not giving consent.

as for cheattillcaught: for help, lok on pg 29. "somebody" left an explanation on how to fix your problem


I would give you bandwidth, but I dont no how can u tell me how? I really need to finsh it.

[CheatTillCaught]

Um...Well good news I got the compiling done but...now I dont know what to do coolnammy and how do you give bandwidth?

[Inevitable]

CheattillCaught... I have a question when u are finished dling Delphi what are u supposed to open next.. b/c i am at the part where it says go to View>Project Manager and expand "dbk32.dll"...but I think I need delpi open to do it.. which I cant b/c I am confused on how to unregister it..

[CheatTillCaught]

Idk either I dont have the tut anymore haha

[Inevitable]

Yo Cheat... I did what You said then after i do that it says registration failed... and it goes back to register and the exit thing again.. whats supposed to happen after u .. click next.. agree.. then hit register later??

[coolnammy1]

bandwidth is given by those who are web hosts -____________-

[BTfreek]

Assuming you actually WANT your tut to be distributed, but you're low on bandwidth, you can always zip a .txt file and images and upload it onto a bittorent tracker =/ Just a suggestion, though.

[CheatTillCaught]

Plz coolnammy BT has a point and ill be your best frienddddddd =) or you could upload on a file hoster!

@inevetanle yes hit later

[coolnammy1]

uhm no id rather not. scruie take this topic down. the link is to an empty site and read my posts above. id rather not repeat myself too much

i have seen some of the most rediculous errors on here. like.. "i cant install delphi" blah blah. "cant find this folder" it was all there. the tut worked. and people STILL CANT FIGURE IT OUT. it doesnt get any easier than that !!!!!

[CheatTillCaught]

coolnammy dude come on plz? At least pm to me I wont leak and ill give you a copy of the UCE plz?

[BTfreek]

I just have a question- does RollingDice's tut still work? Last time I tried, i got to the hex editing part, and then I just couldn't figure it out. If it does work, I think I'll try it again.. =/

[CheatTillCaught]

Dude If you read coolnammys thread it doesnt cuz it uses rev 770

[hmoobher]

all i got was this
"you can all thank the *****s who spammed my site to all the noobs on MPC, CE forum and all those other forums. you know who you are. thank you for using up my bandwidth. no longer will any of you get to use this tut filled with endless screenies for your use. too bad. learn from someone else. i hope they make an easier tut for you."

[corechink]

i have to agree with coolnammy1. you guys are pissing me off, and mods ought to take down this thread. take down the picture uploads, i don't care, people who aren't listening to wtf people are posting don't deserve the generosity of so many other people trying to help them. the leechers who keep asking the same questions:

"pictures are down, what do i do?"
"i have problem when compiling CE..."
"can't find the CE GUI"

two words: SEARCH BAR.

but too late, now nobody can do sh!t because coolnammy was kind enough to teach all of you a lesson by taking down the tut. follow the rules, because they are meant for something. even though the mods tell us to go softly with the leechers, it's gotten to the point when the leechers are just too much. i've done as much as i could do to help all these people, but the new ones just keep coming in and it takes soo much time just to tell them again when they could have just looked back at the other pages to solve their problems.

so it's all you people's fault for not being very intelligent. durr, you copy down instructions. it's like saving a file, you wanna be on the safe side. too bad for those who didn't copy the directions, now very few [or maybe a lot] of people who were smart enough or people who had common sense are now the people these leechers have to leech off of. but too bad, i doubt any of these people are going to give those leechers a second chance.

so hats off to you coolnammy1. some people just don't learn. and for those who do, they could use that knowledge learned for life. later, if i want, i'll help people with making the UCE. but still, i agree w/ 'nammy :D

[sumanroks]

I found out this new hacking community and i think it is great, they are working to get a better hacking secrecy, the users which uses hacks in the forum, if they are found hacking in a public place, will be IP & permanently banned from the forum, nor beggars will get to stay. ^^ Happy mapling, join the forum!
http://www.*************************/.
theyre new and growing so come join them

[flamehunter]

Hey, does anyone know where i can get the Actual Search and Replace Project Manager that he's using in picture 7? I cant open the dbk32.dpr file without it :/

[Kafro]

if you get banned just change your ip noob.

[omgitznd]

how do u change ur ip???
and this tutorial makes a ce not uce correct?

[Animusic]

Quote: "you can all thank the *****s who spammed my site to all the noobs on MPC, CE forum and all those other forums. you know who you are. thank you for using up my bandwidth. no longer will any of you get to use this tut filled with endless screenies for your use. too bad. learn from someone else. i hope they make an easier tut for you." -- that really sucks, T_T i didnt get to finish

[Kafro]

how do u change ur ip???
and this tutorial makes a ce not uce correct?
if you have dynamic ip. go to start>run>cmd> ipconfig/release> ipconfig/renew> and your done nig.