[TUT] The vac...

[InTheShadows]

I've been using the vac for a little while. And just recently I've been vacing really well :D. I don't know what vac I was using because... well i don't know the names of all the vacs and the description of the vacs... but maybe someone could post what vac I was using. It is in a RAR file because for some reason it won't let me post a RTF file (Rich text format) So you should use WordPAD to read the walkthrough. Post here if it is a new vac (doubt it but... meh..) Here is the TUT :

[InTheShadows]

*waiting and waiting* Guess the admins taking a VERY long time to approve this? Well ill post everything anyway ^_^. Though the pictures I made using text might come out.... wrong....

Here is the Tutorial :

The address's you will need are :

God mode : 5B667F - ZF [x][ ]
Unlimited attack : 6C6174 - Offset D60
Character X Co-Ordinate: 6C61B0 - Offset 564
Character Y Co-Ordinate: 6C61B0 - Offset 568
SS EAX X : 5EE176
SS EAX Y : 5EE19C

Now sadly I have to show you how to start each of the address's.... great....

God Mode :

I presume you are IN Maple Story with your character and you have just Alt+Tab to your UCE.

Click on Memory Viewer, Right click on one of those address's (there is a huge list, click on any one of them), And click on "Go to Address". A new window will pop-up asking you what address you would like to go to (you will be doing this alot). Go to the address "5B667F" this is the address for God Mode. Now the address "5B667F" (known as God mode) will be high-lighted. Right click on the God Mode address and click on "Change register at this location". A new window will pop-up looking like this :

Flags
EAX [ ] ____________| CF [ ] [ ]
EBX [ ] ____________| PF [ ] [ ]
ECX [ ] ____________| AF [ ] [ ]
EDX [ ] ____________| ZF [ ] [ ]
ESI [ ] ____________| SF [ ] [ ]
EDI [ ] ____________| OF [ ] [ ]
EBP [ ] ____________|
ESP [ ] ____________|
EIP [ ] ____________|

Hope that looks enough like it T_T. When this window pops up left click on 1st ZF box. (example : ZF [x] [ ] )

Code :

[ ] = empty box
[x] = ticked box
__________| = you can type stuff in this box

Tell me if you would like to add anything else here.
This is what the pop-up before should look like for God Mode:

Flags
EAX [ ] ____________| CF [ ] [ ]
EBX [ ] ____________| PF [ ] [ ]
ECX [ ] ____________| AF [ ] [ ]
EDX [ ] ____________| ZF [x] [ ]
ESI [ ] ____________| SF [ ] [ ]
EDI [ ] ____________| OF [ ] [ ]
EBP [ ] ____________|
ESP [ ] ____________|
EIP [ ] ____________|

The ZF first box should be ticked. Now click on OK and you are now sort of invincible. Everytime you enter an area you get hit ONCE and then you are invincible.

Now we have FINALLY gotten God Mode out of the way. Now it's time for Unlimited Attack.... yay...

Unlimited Attack :

It's time to start the Unlimited Attack hack.

At the main part of your UCE you should see a button that says something like "Manually Add Address" or "[Add Address]". Click on this button. A window will pop-up that will look something like this.... (great another pathetic picture)

Address |_____________|________________________________
Description | No Description_________________________________|
Type | 4 Bytes |V|
Pointer [ ]

Where it says "No Description" type down "Unlimited Attack". Then tick the box next to "Pointer". Now the window will be slightly different..


Address |_____________|________________________________
Description | No Description_________________________________|
Type | 4 Bytes |V|
Pointer [x]
__________ _______
|Add Pointer| |Remove|
This pointer points to address ???????? The offset you chose brings it to ????????
Address of pointer |___________| Offset (Hex) | 0 |

Where it says "Address of pointer", in the little box type "6C6174". Now where it says "Offset (Hex)", in the little box type "D60". Press OK. At the main of the UCE you should see "Unlimited Attack" with some stuff to the right of it and a little box to the left of it. Right click on "Unlimited attack" And hover your cursor over "Change Record" then left click on "Value". A new pop-up window will open. Type in a random number between 1 and 100. Then press OK. Now the value should be whatever number you decided to use, to the left of "Unlimited Attack" click on the little box. Now you can attack forever in the same spot! ^_^.

Congratulations on doing two hacks. It's time we started on "Character X Co-Ordinate".

Character X Co-Ordinate :

Basically you are doing the same thing you did to do the "Unlimited Attack" hack but slightly different. Same as before click on "Manually add address". I'm not going to do one of my "magnificent" pictures. For the Description put in "Character X Co-Ordinate". Click on the "Pointer Tick Box". For the "Address of Pointer" put in "6C61B0". For the "Offset (Hex)" put in "564". Click Ok and your done ^_^.

Character Y Co-Ordinate :

This is pretty much exactly the same as the X Co-Ordinate but you replace 1 number.

Click on "Manually add address". For the description put in "Character Y Co-Ordinate". Click on the "Pointer tick box". For the "Address of pointer" put in "6C61B0". For the "Offset (Hex)" put in "568".

SS EAX X :

Back to the Memory Viewer... Now we are going to sort of start our vacing. First off in the map of Maple Story (somewhere that isn't packed with people) stand where you want the monsters to vac to. Now alt+tab out of Maple Story and go back to your UCE. Now look at your "Character X Co-Ordinate" Value in the main UCE. Right click "Character X Co-Ordinate" and hover your cursor over "Change Record" then click on "Value". Copy the value and cancle out of the window that pops up. Around near the top of your UCE there should be a box with the words "Hex" next to it. To the right of "Hex" is another box that you can type into. Paste the value of "Character X Co-Ordinate" into that box to the RIGHT of "Hex". Now click on the tick box to the left of "Hex".
Some random letters and numbers will come up. Lets pretend the "Hex" value of "Character X Co-Ordinate" was "FFFFFF08" (FFFFFF08 is the bottom left corner of Henesys Hunting Grounds II). Now in the Memory Viewer, Right click on one of the address's, Click on "Go to address" Type in "5EE176" as the address. Right click on the address "5EE176" and click on "Change register to this location". Now a window will pop-up (time for a picture). As an example we will use my "Hex" Value of the bottom left corner of Henesys Hunting grounds II. "FFFFFF08".

Flags
EAX [x] FFFFFF08 | CF [ ] [ ]
EBX [ ] ____________| PF [ ] [ ]
ECX [ ] ____________| AF [ ] [ ]
EDX [ ] ____________| ZF [ ] [ ]
ESI [ ] ____________| SF [ ] [ ]
EDI [ ] ____________| OF [ ] [ ]
EBP [ ] ____________|
ESP [ ] ____________|
EIP [ ] ____________|

Tick the EAX Tick box and type in your "Character X Co-Ordinate HEX Value" the bottom left corner of the Henesys Hunting Grounds II is FFFFFF08 (can be different). So I put in the "Character X Co-Ordinate HEX Value" in the box. Now we have to do the SS EAX Y....

SS EAX Y :

This is almost exactly the same as the "SS EAX X" thing we did just before. But instead of using the "Character X Co-Ordinate" we will use the "Character Y Co-Ordinate". Right click on the "Character Y Co-Ordinate" And hover your cursor over "Change Record" then click on "Value". Copy the value then click cancle. Now we do what we did before. In the box to the right of "Hex" paste the value of the "Character Y Co-Ordinate". Then tick the tick box to the left of "Hex". Now copy the next text that is in the box to the RIGHT of "Hex. Now lets use the bottom left of the Henesys Hunting Grounds II Character Y HEX Value. Which is "FFFFFFAB". So now we go back to the memory viewer and "Go to the Address" "5EE19C". Same as always we Right click and click on "Change register to this location" and a window will pop-up.

Flags
EAX [x] FFFFFFAB | CF [ ] [ ]
EBX [ ] ____________| PF [ ] [ ]
ECX [ ] ____________| AF [ ] [ ]
EDX [ ] ____________| ZF [ ] [ ]
ESI [ ] ____________| SF [ ] [ ]
EDI [ ] ____________| OF [ ] [ ]
EBP [ ] ____________|
ESP [ ] ____________|
EIP [ ] ____________|

Now we tick the EAX tick box and paste our "Character Y HEX Value". And Click OK. Go back to Maple Story and you should see ALOT of monsters around you, you won't be able to move away sadly, so you can't run away, but you will be able to get alot of exp attacking all the monsters clustered around you. (they will also spawn somewhere else but then instantly be sucked to you).

Congratulations on doing <insert vac name here>. Does anyone know the name of this vac? If it's new TELL ME >:@.


This walkthrough was created by "InTheShadows". This is copy write if you copy this and claim it as your own or distribute it without asking "InTheShadows"... I will hunt you down and kill you repeatedly >:@.

[DuckPunisher]

EAX vac is the name...

[eastcoast4lyfe]

SS EAX to be exact. SS stands for Serversided so you will be hidden off the map only half the time, meaning, if someone decides to stay in your map for a few minutes, he/she will see you for a few seconds then you will go back to the off-screen location again, even though on your computer it may seem that you are always off-screen, the truth is this vac sucks because people can still see you when approaching from a certain distance.

[scruie]

InTheShadows file is approved - we mods do have a life outside of MPC sometimes it can take a bit of time for files to be approved.

File Approved: USE AT OWN RISK!!!

[snipemum]

ok so thats the walkthrough, where should i add the code? whts the actual hacking program?

[0sama]

Thanks! I never understood is before:)

[InTheShadows]

ok so thats the walkthrough, where should i add the code? whts the actual hacking program? It's quite easy. You need a UCE to actually do any of this. No one has publicly released one and left it publicly released (thank god) but you can make a UCE using a tutorial. If you want to make a UCE ask someone else who knows more than me T_T.

[sh!mp]

This is SSEAX/Pervac, depending on whatever you feel like calling it, but the real name is pervac. I don't explain like saying why, it's posted in the master links or something in the maplestory CE forums.

[InTheShadows]

Hello, I'm quite pissed at the moment. Someone decided to claim my work as their own. http://www.mpcforum.com/showthread.php?p=1347527#post1347527

Someone decided to claim my work as their own :@ :@ :@

[sumanroks]

in this step (the 1st step)


Click on Memory Viewer, Right click on one of those address's (there is a huge list, click on any one of them), And click on "Go to Address". A new window will pop-up asking you what address you would like to go to (you will be doing this alot). Go to the address "5B667F" this is the address for God Mode. Now the address "5B667F" (known as God mode) will be high-lighted. Right click on the God Mode address and click on "Change register at this location". A new window will pop-up looking like this :

i am able to get the address and it get highlighted ut whe i press "Change register at this location" it gives me an error saying
http://img99.imageshack.us/img99/9412/untitled3fd.jpg

http://img89.imageshack.us/img89/7650/untitled12zf.jpg


http://img89.imageshack.us/img89/351/untitled33bn.jpg

then if i do it again it says

http://img97.imageshack.us/img97/8098/untitled46cq.jpg



can u please tell me wat to do?



is that thing is really ures then that gu sure idnt work at all to alter it >_>

[ExiledDragon]

This is SSEAX/Pervac, depending on whatever you feel like calling it, but the real name is pervac. I don't explain like saying why, it's posted in the master links or something in the maplestory CE forums.


No, sseax is the original, pervac was changed later =)

One of the original creators of sseax, was talking about this. He seemed irritated.

[InTheShadows]

I see well thanks for actually giving it a name ^_^. I was just playing around with the address's and it just happened :D. Wish I could still do it but Gay Guard decided to update so now we have to make a new UCE or just leech of someone who publicly releases it. (Im going to make my own...)

[gmdiddy]

thanx, i needed this, but can u add wallvac?

[ben_new]

man when i type the address and done go to address and type in the address it shoes me ????????????
is there any bypass or anything else needed if those can u post it here ?

[AntonKing]

guys can u help me plz? i am new here and i want vac but i dont know where to get the program and how to use it, plz plz plz plz plz plz plz plz plz plz plz plz ... tell me the program, where to get it and how to use it

[aznpoo]

Lol, I can't believe i found this easyier than some other tuts, wow awesome job, but all i need now is a working uce to test this.

[youyou._]

nice tut man , but when i use it i got d/c -.- Why ? and does it work for all the maps ?

thanks a lot for this tut .

[Wheat_Thins]

This is all fantastic but where the crap do i find a UCE to do any of this!

[greyswindle]

man when i type the address and done go to address and type in the address it shoes me ????????????
is there any bypass or anything else needed if those can u post it here ?

I have the same problem as this guy I think. I set up all the adresses and such using the serbio engine and can get everything loaded up, but it seems as if its not properly connecting with MS 'cause the pointer values all remain as ?'s. I've looked though all the stickies and many non-sticky threads, but this is rarely mentioned and never answered (I might be blind though). Its probably a simple noobish thing (and indeed I AM a newb) but if possible could someone explain this to us?