tanjiajun_34
7th September 2006, 05:57
1. Before starting, change the freeze interval which can be found in the UCE settings to 1.
2. Do the steps for attaching the Maple Story to UCE and those bypasses
3. Don’t login in to your maple story account
4. Add the addresses of the wall vac
5. Freeze left and right addresses don’t freeze up and down
6. Change Left address valve to -99999 which will auto change to another valve
7. Change Right address to 99999
8. Go back Maple Story
9. Login your account
10. Go to the most right and left of the map and see if u can see out of map
Note: Some map may not be able to see out of map so try to walk out (May Cause DC)
11. If still cannot, change channel and try again step 10
12. On Gravity Hack
Gravity:
inject this code, then go to 632c6d and change EIP to CodeCave, then add the gravityaddress (double byte) to your code list, then change the gravity to whatever u want, 2000 is normal
alloc(CodeCave, 11)
alloc(GravityAddress, 8)
CodeCave:
fmul qword ptr [GravityAddress]
jmp 00632c73
13. Set Gravity to 0
14. Walk out of map. Don’t walk out too much!!!
15. Set the wall vac to vac monster out there
16. Finish!!!
Below is this tut for word
2. Do the steps for attaching the Maple Story to UCE and those bypasses
3. Don’t login in to your maple story account
4. Add the addresses of the wall vac
5. Freeze left and right addresses don’t freeze up and down
6. Change Left address valve to -99999 which will auto change to another valve
7. Change Right address to 99999
8. Go back Maple Story
9. Login your account
10. Go to the most right and left of the map and see if u can see out of map
Note: Some map may not be able to see out of map so try to walk out (May Cause DC)
11. If still cannot, change channel and try again step 10
12. On Gravity Hack
Gravity:
inject this code, then go to 632c6d and change EIP to CodeCave, then add the gravityaddress (double byte) to your code list, then change the gravity to whatever u want, 2000 is normal
alloc(CodeCave, 11)
alloc(GravityAddress, 8)
CodeCave:
fmul qword ptr [GravityAddress]
jmp 00632c73
13. Set Gravity to 0
14. Walk out of map. Don’t walk out too much!!!
15. Set the wall vac to vac monster out there
16. Finish!!!
Below is this tut for word