Trickster Online | Hackthread | Part 3

[cilegray]

First of all, I would like to give credit where credit is due.

BosBeer - Thx for providing me the arrays for everything listed here.
ME - For finding updated adresses and bypass method.
Dark Hacker - For stickying this thread for me. Thx!

Drill1 - 004B8989 tick SF and OF
Drill2 - 004B8A32 tick SF and OF

Item everytime - 00419EDC tick ZF

PLEASE DO NOT RELEASE MACHINE GUN AND CRITICAL. KEEP THOSE ADRESSES PRIVATE. THX

As for the rest, I'll experiment a bit, and i might release the other adresses, might not. Ok machine gun works, and I'm having problems with always critical, but so far so good. I'm not gonna release machine gun to the public right now as it's too devastator to the game. Maybe later.

Here are the settings for your UCE

General settings : Tick all
Scan Settings : x x _ _ x x _ x
File Associations : _ _ _ _ _
Code finder : use debug registers
Assembler : tick everything except the last box
Extra : Use Kernelmode Debugger

Use GRAPP 2.08 to bypass your CE and you should be ready to hack. Have fun.

http://www.gftracker.org/screenshot0001.jpg - Here's my proof. Taken less than 10 mins ago.

[timmymen3]

Why don't you give the crit and machine gun hack because most hackers in trickster online are lions xD

[cilegray]

Why ?? Why should I give them. I take time from my busy schedule to post some adresses for the noobies like you and you beg for more.

Why the fvck should I post them ? If you want them, why don't you just do the work yourself and find them on your own.

[chinkieboy]

thanks for the help cilegray great post~ all addresses worked

[cilegray]

Of course they worked. Did you see my screenshot ? 3 levels in 10 minutes, o so nice.

[X11]

Aha good job. You are now part of my team if you want to join at any time. I'm also planning to let others who understand how the gun reload system works then I'll let them benefit from my team which also benefits from galder limit hack =]

50% updated anyways. I'll get galder hack done within 30 minutes after i finish updating. Got a whole darn lot to code =_=

[cilegray]

Well Thanks.... just PM me and tell me what exactly being part of your team means, and if you can give me (as promessed) your galder limit hack :)

Of course, if you don't allready have the crit/reload addys... ill supply them to you but they have allready been leaked all over the place.

[X11]

Lol. I don't need the leaked verison ;P I got the better version which is private to me and 3 other people which I gave to.

[darknessclaw]

on extra, do we tick anything else or just that? :o

[krzygoku9221]

I use DualEngine 2 and GRAPP 2.08.
I can get through the GameGaurd, but when I process watch Trickster.bin there are like 4 things and they're all numbers, not Trickster.bin and Game.des. When I put in the hack codes, I don't see a difference at all with the speed of my drill. I don't know what the problem is.
Ty anyways for the codes cilegray.

[cilegray]

Use process watch button.

[krzygoku9221]

thx cilegray for helping me and for the codes.
Btw pm me for the No reload/crit gun hack any time you want to XD lol jk. Ty anywas

[Dark Hacker]

Renamed, stickied. Welcome to part 3.

[Marluxia]

Guys im having major problems it doesnt work for me.

Step 1) I open duel engine 2
Step 2) open grapp 2.08
Step 3) target process name i type "Trickster.bin"
Step 4) tool process name i type "DualEngine.exe
Step 5) Click start
Step 6) I double click trickster and the splash comes up
Step 7) i click start
Step 8) just as it completely loads up my comp restarts

Am I doing it wrong?

Please tell me

[krzygoku9221]

Marluxia I think starting from Step 6 you're doing it wrong.

Step 6) Process Watch Trickster.Bin and select Trickster.bin

and you should be connected.

[Marluxia]

Okay i dont know how to get trickster.bin on my process watcher without having to click start on the splash first coz trickster only runs after clicking start on the splash. I also go to the process watch and it has this little numbers and letters with question marks. Unless you meant the process watch button on the top left corner of the program.

I still get restarted and i dont know why. Can someone on this thread please write down explicit instructions, step-by-step of how you are supposed to do it coz i listened to the other ones and they still dont work. I use dual engine 2 and grapp 2.08
I have exactly the right settings as previously posted in this thread.

Please its driving me insane

[supermoose]

hmm, bosbeer, could ya post byte arrays for machine gun and crit? thanks =D

[pumpkin91]

Hi Marluxia

try this link, its another guide to bypass from maplestory section of forums.
as far as i see you are doing it correct so maybe its just your settings are off a little.
hope this helps

http://www.mpcforum.com/showthread.php?t=158643&highlight=dual+engine

[Christie]

thanks a lot... it works

[inyczbrianxp]

look. i dont give a dam if u nerds dont want to post hack codes. ill feel the same way. working 24/7 with no life finding hacks. i wuldnt wana give it to leechers too. but can someone atleast tell me how to run dual engine? i have no idea wat GR is and how to work it. atleast tell me how to work those.

[supermoose]

um thats not very nice.... specially the "no life" bits... you get more potatoes with sugar than salt!! or was it flies.... hm...
anyway. i'll assume you have both programs.
run both. Dual Engine is your generic Cheat engine program, and looks pretty much the same as CE 5.3. Put settings as Cile specified.
Now look at GR, there are 2 boxes. Target process and Tool process. Fill the target process as Trickster.bin, tool process as DualEngine.exe. Note that both are case sensitive. Now press start. the start button should turn gray, and stop button turn black.
Now, run your trickster online patcher. And click on Start. chill, let it load. login. select char. whatever. go in, walk around for 3 seconds. alt tab to DualEngine, and click on the process list. then click on a button titled "Process Watch". Select "Trickster (10)"
There! its attached. go do random stuff. if something random works, post it here! especially if you do something and suddenly realize that crits miss you! Dadadump.

[pumpkin91]

inyczbrianxp, wow nice aggressive post, i wonder why people won't help you ? :P

the link i posted just above your post tells you everything you need to know to work GR and dual engine , enough to get it to work for trickster at least

if you need more help i'll post link to files to download.


http://files.filefront.com/DualGR_Ver208rar/;6005621;;/fileinfo.html

you have to do the reading yourself, i can't help you with that, sorry.


EDIT* oops i got distracted while posting and it took awhile before i clicked post. Supermoose beat me to it :) with more informative post. Now i look like a fool ......yeah i know what your thinking ...no change :)

[inyczbrianxp]

i put mine on stealth mode accidently. i cant maximize dual engine.

[cilegray]

You need to click 'START' on the splash window for Trickster.bin to load and for you to be able to attach to it.

[Jhoen]

is there a tut on how to find the right addresss?
im just a noob trying to learn how to find the address
and is there by any chance a "no miss" hack for dragon or mage type?

[lm47]

there are 2 versions of GRAPP 2.08, 1 comes with Dual Engine folder, 1 is the later fixed version from the maker himself. I heard the version comes with Dual Engine might screw up your computer, so go search for the other one in the CE forum

To anyone with gun reload, fast cast, party and crit byte arrays, don't give them out . Hacks concerning damages and fast leveling should be private.

>cilegray: don't you have a hotmail account so I can add you on MSN? :rambo:

[cilegray]

Yeah, you can add me.... but it's not hotmail :P Just check your PMs.

[swiftplayer]

so any1 got a step by step way on how to find byte arrays ill be happy to learn =]

[supermoose]

lm47, i believe thats up to bosbeer to decide? besides, cile got the crit and mg byte arrays from bosbeer in the first place. You, who have done nothing for us, have no right to anything, really.

also, by reading cheat engine forums you can pretty much save yourself the trouble of having to use grapp.
i followed the tutorial here
http://forum.cheatengine.org/viewtopic.php?t=17862&highlight=updated

[lm47]

if you meant i have done nothing for leechers, you are right

And i do have the right to remind bosbeer and others holding the addresses that they also have the right to keep the hacks private. By posting the addresses, not only the leechers in MPC would abuse the hacks but also anyone can google for the address.

Begging, which is what you are doing, is also against MPC rules. Giving out hints and stuffs are encouraged but not the obvious address.

The gun hacks are still in the memory region of 004XXXXX, check the jumps, if you don't know what jumps are :
http://www.vwaskar.pwp.blueyonder.co.uk/asm/asmd1.txt
http://www.vwaskar.pwp.blueyonder.co.uk/asm/asmd2.txt
http://www.vwaskar.pwp.blueyonder.co.uk/asm/asmd3.txt

[moonfox]

What is there to argue? The code already have been release somewhere else.

And leecher are people too. And I believe all of you are leecher at some point of the time. So please stop act like "god", deciding who should have and who should not have the code.

[Marluxia]

Okay i went to the link from the maple story guide and i still get restarted.

Its annoying me coz the part where i have to click start on the splash to activate trickster.bin, when i click process watch, i cant find anything that says "trickster" just a whole lot of numbers and stuff followed by "???" and then "(x)" x being any number.

Omg this is annoying me. It doesn't seem to work for me. Does anyone know of an alternate way to bypass it coz i have had my comp restart 13 times 0_o

[myloveaudrey]

for code like god mode, i would tick zf right?

[supermoose]

lm47, you are a complete retard. i have never begged for anything. and i'm not saying you havent done anything for leechers. im saying you havent done anything for anyone except yourself. if you truly dont want people to ask you for a hack, why even tell people you have it? its like announcing to everyone, "hi, i masturbated!" why there, congratulations!

In any case, i shall not respond to any more of your posts; i shall simply wait for bosbeer to post the arrays as i am sure he will.

[cilegray]

lm47, you are a complete retard. i have never begged for anything. and i'm not saying you havent done anything for leechers. im saying you havent done anything for anyone except yourself. if you truly dont want people to ask you for a hack, why even tell people you have it? its like announcing to everyone, "hi, i masturbated!" why there, congratulations!

In any case, i shall not respond to any more of your posts; i shall simply wait for bosbeer to post the arrays as i am sure he will.

You are completely wrong. LM47, as well as many others on here, would like to help people find the stuff by themselves... do a bit of work. On the other hand, 90% of the ppl on these forums are lazy fvcks that just say 'gimme the address plz, i need the address plox, and WHATS THE ADRESS FOR GODMODE AND MONEY HACK !!1!!11!1!'

If you don't show that you're willing to do your part of the work to find out about it, then why the hell should we do everything for you.

And I'm sure bosbeer is going to keep the arrays for himself, for the same exact reasons i just posted about. So get off your ass and start working for your hacks.

[supermoose]

i. did not. fvcking ask for the address. i asked for the same fvcking thing you asked for and got. the damn byte arrays. its retarded how easily the address can be gotten from the byte arrays but thats EXACTLY WHAT YOU DID
WORKING? WHAT WORK! OH LOOK I CAN SEARCH MEMORY TOO.

[soriano]

hey where do i download gr2.8 can some one send link or url

[supermoose]

the dual engine attachment in this thread,
http://www.mpcforum.com/showthread.p...ht=dual+engine
comes with gr2.8.

[cilegray]

The difference between you and me is that I actually gave bosbeer something worthwhile in exchange. I was the first (on here anyways) to actually get the new adresses.

Only reason I didn't allready have the arrays is that I had been playing Trickster for 2 days and didn't have time to check em out before the patch. You, on the other hand, have no reason not to have saved them :D

Ok, now I'm ready to start working on finding something else... that as far as I know has always been private, party exp.

If you know what you are doing and would like to help, pm me. So far, I have found the adresses that change when your party size goes up or down, as well as two adresses which fluctuate quite a bit depending on your exp bonus. I have come down to one adress that accesses and write to that given adress, and at this point I'm pretty sure I'm at the source of the party exp hack which happens to be 5F2DD7. If you want to help from there, feel free to chip in.

[bilybr]

wat is drill 1 and drill 2 for?

[cilegray]

Drills faster.

[krzygoku9221]

Moonfox can u post the website on this thread?

[bilybr]

oo
if i know how to find codes i coud help u finding it :)

[moonfox]

Moonfox can u post the website on this thread?

Sorry, but I do not want to post the link diectly here, as that'll be like spoon feeding. If you really put some effort, you should be able to find it easily using search engine like google. It's at some other less obvious forum.

[supermoose]

still, you did use the byte arrays, so (for at least this time) you can't really lecture me about them. At any rate, you have no idea when i started playing trickster, which is, i might add, for as short an amount of time as you. (yes. 2 days.)
which is still technically enough time. bleh. enough!

is exp such that you can just find the address and change the value? exp has a floating point value, i suppose. i'll go add people to my party and play with scanning for increasing unidentified values.

[Kaiza]

You are completely wrong. LM47, as well as many others on here, would like to help people find the stuff by themselves... do a bit of work. On the other hand, 90% of the ppl on these forums are lazy fvcks that just say 'gimme the address plz, i need the address plox, and WHATS THE ADRESS FOR GODMODE AND MONEY HACK !!1!!11!1!'

If you don't show that you're willing to do your part of the work to find out about it, then why the hell should we do everything for you.

And I'm sure bosbeer is going to keep the arrays for himself, for the same exact reasons i just posted about. So get off your ass and start working for your hacks.

I am here to read and learn how to find out how to search for them ^^ a hint was with the jumpers ^^

[cilegray]

What I did was search for a value that went UP as my exp % went up, and decreased when I changed map... and repeated till i was down to a few addresses that didnt change.

I then found what writes to each of those adresses and came up with that address.

[inyczbrianxp]

anyone knows how to unstealth mode my dual engine? i cant process watch now cuz of that.... and btw, what do i check off for the drill hack? ZF?

[krzygoku9221]

That happened to me once too inyczbrianxp. I think you just go to settings and go to the Extra tab and unclick the stealth stuff.

[supermoose]

oh yes. how does one convert floating point values into hexadecimal values?

[Marluxia]

can anyone tell me if there is any other thing to use instead of gr. Coz seriously it just does not work for me and i dont understand why.

I currently use the game resistance that is coded by Dual and have also used the game resistance 2.08 version as well and both dont work. This is my steps tell me if im wrong.

1. Open gr and cheat engine
2. type in "target" as Trickster.bin and tool as "DualEngine.exe"
3. Click start so that the writing turns grey to signify its running
4. Click the trickster splash icon to bring up the splash
5. Click start on the splash screen to activate trickster.bin
6. As soon as its activated, click process watch icon, click process watch and double click "trickster"
7. Wait for game to completely load up

Just as it does that my comp restarts. I've gotten all my settings right and i've even downloaded zenx to see if that works. With dual engine 2, when i went to process watch, i couldn't locate anything that said "trickster" coz it was all numbers and "???" but with zenx i can.

If i've done anything wrong please tell me, and also if someone has any other ideas on what else to use besides gr. Thanks and sorry for sounding so whiny and stupid its just that I so desperate coz all day my comp just keeps restarting.

EDIT---
Okay so my comp restarted and i probably should have mentioned this before. Everytime i open gr and dual engine for the first time after my comp has just been turned on or re-started, when i type in Trickster.bin on target and DualEngine.exe on tool, when i click start this message always pops up the first time.

Msg
Service open failed
(this is the first one that pops up in a small window)

Msg
driver load faild[hdevice]
(this is the second one that pops up right after the first one)

Could this have something to do with the reason why i keep getting restarted??
Can someone tell me how to fix this?

[Joanne]

@Marluxia try unticking the auto restart on system failure at your system properties.... so that you can see the real problem..

@cilegray item everytime works?

[supermoose]

@Marluxia dont attach as soon as or while its loading. attach AFTER its loaded and you've logged in and in your character and everything. thats how grapp works after all

@joanne item every time as in you only drill when theres an item. and yes it works.

[Marluxia]

This is the annoying part. I cant even log in coz as soon as the loading screen comes up my computer restarts.

I did an experiment to see what is up exactly and this is what i found. I loaded up gr first thats coded by Dual without opening up dual engine. I could get to the login screen but as soon as i chose my character it had an nprotect error string. So i used the original gr 2.08 one and i could log on just fine, this is also while the dual engine was not opened yet.

So it has come to the conclusion that even with gr, trickster still detects dual engine and makes my computer restart. Its annoying me to death, i dont know what to do coz it seems to be working for everyone else.

Does anyone have any solutions that i haven't tried yet. Does anyone know what those messages mean on my previous post?

Can someone upload the link to where they got there dual engine coz maybe i might have a different or incorrect one.

[chronos]

is casting n cooldown hack exist ?
if yes, it can be hack or it's on server side ?

[Connor.!]

Sorry but can someone make a Step-By-Step guide because its very very confusing..

[Joanne]

just use the guide in mapplestory section...

[omglol]

Sorry but can someone make a Step-By-Step guide because its very very confusing..

theres something called the search button or you can find it here. (http://www.goddamnfu<kinggoogleit.com)

[chiharu88]

i just see their point here so i think i will just remove it

[Connor.!]

Ok guys i kind of have it now but i don't know where to Put the Adresses in?

[chiharu88]

can anyone tell me if there is any other thing to use instead of gr. Coz seriously it just does not work for me and i dont understand why.

I currently use the game resistance that is coded by Dual and have also used the game resistance 2.08 version as well and both dont work. This is my steps tell me if im wrong.

1. Open gr and cheat engine
2. type in "target" as Trickster.bin and tool as "DualEngine.exe"
3. Click start so that the writing turns grey to signify its running
4. Click the trickster splash icon to bring up the splash
5. Click start on the splash screen to activate trickster.bin
6. As soon as its activated, click process watch icon, click process watch and double click "trickster"
7. Wait for game to completely load up

Just as it does that my comp restarts. I've gotten all my settings right and i've even downloaded zenx to see if that works. With dual engine 2, when i went to process watch, i couldn't locate anything that said "trickster" coz it was all numbers and "???" but with zenx i can.

If i've done anything wrong please tell me, and also if someone has any other ideas on what else to use besides gr. Thanks and sorry for sounding so whiny and stupid its just that I so desperate coz all day my comp just keeps restarting.

EDIT---
Okay so my comp restarted and i probably should have mentioned this before. Everytime i open gr and dual engine for the first time after my comp has just been turned on or re-started, when i type in Trickster.bin on target and DualEngine.exe on tool, when i click start this message always pops up the first time.

Msg
Service open failed
(this is the first one that pops up in a small window)

Msg
driver load faild[hdevice]
(this is the second one that pops up right after the first one)

Could this have something to do with the reason why i keep getting restarted??
Can someone tell me how to fix this?

check ur dualengine setting 1st,check it if you have the correct settings

[Joanne]

@Connor.!: you dont have to search for that address... figure it out...!

[Connor.!]

@Connor.!: you dont have to search for that address... figure it out...!

No where do i put it!

[ppt2]

reload/crit hack: 1 debug reg
4ba018 [x]EIP:4ba160


this is what chiharu said, before he deleted his msg.

not using a lion, so i dunno whether it works..
just copy n paste what i saw on his post.

[moonfox]

can anyone tell me if there is any other thing to use instead of gr. Coz seriously it just does not work for me and i dont understand why.

I currently use the game resistance that is coded by Dual and have also used the game resistance 2.08 version as well and both dont work. This is my steps tell me if im wrong.

1. Open gr and cheat engine
2. type in "target" as Trickster.bin and tool as "DualEngine.exe"
3. Click start so that the writing turns grey to signify its running
4. Click the trickster splash icon to bring up the splash
5. Click start on the splash screen to activate trickster.bin
6. As soon as its activated, click process watch icon, click process watch and double click "trickster"
7. Wait for game to completely load up

Just as it does that my comp restarts. I've gotten all my settings right and i've even downloaded zenx to see if that works. With dual engine 2, when i went to process watch, i couldn't locate anything that said "trickster" coz it was all numbers and "???" but with zenx i can.

If i've done anything wrong please tell me, and also if someone has any other ideas on what else to use besides gr. Thanks and sorry for sounding so whiny and stupid its just that I so desperate coz all day my comp just keeps restarting.

EDIT---
Okay so my comp restarted and i probably should have mentioned this before. Everytime i open gr and dual engine for the first time after my comp has just been turned on or re-started, when i type in Trickster.bin on target and DualEngine.exe on tool, when i click start this message always pops up the first time.

Msg
Service open failed
(this is the first one that pops up in a small window)

Msg
driver load faild[hdevice]
(this is the second one that pops up right after the first one)

Could this have something to do with the reason why i keep getting restarted??
Can someone tell me how to fix this?

Well, seems lke I have almost all your problem before. But now I'm okay. Here's my steps compare to yours.
1. Open gr and DE
2. type in "target" as Trickster.bin and tool as "DualEngine.exe"
3. Run trickster splash.
4. Click start on trickster splash, and when the trickster splash screen is gone, quickly click start in GR to turn the resistance on.
5. Anytime after trickster.bin is loaded up, (during the <game start> screen, or already logon in game, click process watch icon, click process watch and double click "trickster.bin(10)"

Hope it helps. :cheeky:

[cilegray]

reload/crit hack: 1 debug reg
4ba018 [x]EIP:4ba160


this is what chiharu said, before he deleted his msg.

not using a lion, so i dunno whether it works..
just copy n paste what i saw on his post.

I believe this is an old value or something because this is NOT the address for crit and no-reload. sorry.

[janemba001]

Does anyone know the correct settings for the engines for trickster? I mean the first post was a bit too vague.......some things are checked still even though it only says to check one thing.....

[Marluxia]

Okay so i checked my settings and they are what they are supposed to be. This is what happens to me everytime

1. Open gr and type target as Trickster.bin and tool as DualEngine.exe

2. I then click on the splash and press start to start trickster

3. As soon as that disappears i click start on gr and this message always pops up the first time

"sevice open failed"
and
"driver load failed[hdevice]"

What does this mean?

[janemba001]

Marluxia what settings are you using? cause Im having a restart problem...so Im guessing its my settings!

Help me out?

[Marluxia]

Use the settings displayed on the very first post of this thread. Tell me if you keep restarting coz then maybe we have similar problems

[janemba001]

Im having a hard time understanding the settings...since I dont' have DE [ cuz I have my own uce right ] certain things are checked even though I need to check what it's telling me to..........????

--------------------
EDIT
--------------------
Allright well I've gotten to the point where I can login to the game, but soon after that a little box pops up saying something about nprotect string or something...prolly detected lol

[Marluxia]

you can log on? Well you certainly gone ahead of me i still cant log on. Everytime trickster starts loading i get restarted. I dont think my gr is working properly. Can someone link me to where they downloaded their gr and dual engine coz maybe i downloaded mine from a stupid place coz it wasnt from here.

[janemba001]

Marluxia try it like this then...cause this is what I did...Im close to almost getting in...lol!!!

1)Open GR and type in the things.
2)Open Dual Engine.
3)ouble click on the Splash icon thingy.
4)Before you press start on Splash, press start for GR and it should go gray.
5)Press start for Trickster.
6)Wait till the login thing comes on.
7)Go to Process Watch on Dual Engine and choose trickster.bin(10)
8)This is where you should have no problems!!! But I keep restarting here...??

[cilegray]

Yes, you press start on gr BEFORE YOU START TRICKSTER.

It's the UCE that you need to attach AFTER you start the game.

[Marluxia]

Okay so i've finally successfully bypassed with a new dual engine that i downloaded from here. So it mustve been the one i had before that was stupid.

Okay so i've managed to hack and have found the crit hack (sorry guys i would like to share but thread asked specifically not to) all i need to know now is whether the machine gun hack is before the crit hack address or after?

Can someone provide me this simple hint.
Don't flame me if you dont want to, a simple no would suffice as well ^_^

[andrewangel]

Ok this is for those of u still begging, i myself is a noob too. Spend 4 days reading that asm stuffs. I even asked my ComSci teacher in skool to learn lolz... -.-

If u don wanna read it and you want to shoot faster!
Use the old schoool way!!

From veri early times.

Search 2 byte 17225 when gun full
search decrease value right after u shoot
U'll end up with 2 value freeze the one close to 17225 to 17225.
U'll shoot way faster than before at least.

Credit goes to whoever.

Glad i took grade 12 comsci on java ^^

[cilegray]

Heh that's a nice one there andrew, but the real machine gun just reduces your reload time to 10 miliseconds ;) and it's done via ZF.

As for the crit hack adress being before or after the no-reload... I can't say... but it's somewhat in the same area :)

[Marluxia]

Hey thanks guys i found the no-reload hack address and yeah it was like really close like very close.

So i decided to help all the other guys who havent found it out yet which i know will kinda help the leechers since im posting it here but here it goes.

The hint is that the starting numbers are 0...... and has some letters and other numbers ^-^

Well my work here is done lol, and good luck with the hint. If you want the real hint, cilegray gave one but only one, so yeah ^_^

On the good side, they actually aren't that hard to find, i started hacking for like 10 minutes and found the crit hack address so its easy. Although the no-reload hack did evade my attention at first so maybe it was just beginners luck for me ^_^

[Jhoen]

what value do i search to find the gun crit/reload??
can u give me any hints how to find it?

cilegray
could you help me a little to find the codes? im just a noob here just trying to learn something

[tsj5j]

Suggestion : Install the close beta client and try to force the old one to start.

Get the old arrays, and see if they work for the new client.

[enruiwe]

cilegray says to search for jump between 46xxxx region and 4Fxxxx region ...

[lifetotake]

Suggestion : Install the close beta client and try to force the old one to start.

Get the old arrays, and see if they work for the new client.

The arrays all changed =/

[Marluxia]

Err sorry for anyone sending me pms, my explorer wont let me view it. Okay this is gonna sound like so noob lame to experienced hackers but i was experimenting with the addresses today and just found out that the crit and no-reload hacks can be done all through one address, leaving one spare address for drilling purposes.

Again its probably old news but like i never knew that haha. Anyway cilegray is correct the addresses for all gun and drilling hacks are found between 46xxxx and 4fxxxx.
Okay ill give you guys a little break.

Ill narrow it down just a little. Its between 47xxxx and 4exxxx.

[illusionboy]

ok im new here =D and yes! thx to cilegray starting this?i read up everything and yes i get my no reload =Dsuper fast machine gun..hmm now im still working on the critcal part... =_= no clue to that...as its quite near?or diff add...first timers is like that.. try to find it now. :) thx to all the ppl here.

[Marluxia]

Some of you guys have already found the no-reload address hack. As cilegray has said, the crit hack address is close to it so just take a look around. You will see similar patterns of the addresses like the old ones.
I'm not saying they are the same addresses, but you may notice a kind of pattern ... or maybe that was just me ^_^

[kamuka]

erm.....i got a problem
i did what andrew said
i search for 17225 exact vaule 2byte
then i shoot and search for decreased value
there is alot of addy

[illusionboy]

:PSome of you guys have already found the no-reload address hack. As cilegray has said, the crit hack address is close to it so just take a look around. You will see similar patterns of the addresses like the old ones.
I'm not saying they are the same addresses, but you may notice a kind of pattern ... or maybe that was just me ^_^

ok...i slightly get wat u mean..=D i will try it out.but too obvious..so i think i stick to normal hit first.lol now for cilegray address for drilling.:P

[noobz91]

o.O i got the address since ytd XD dun belive i will post ss XD

[Red_titan]

A little off topic but does anyone use Delhpi 7?

How long did it take you guys to find it? I have been doing searches and trying to get it to work for about 4 hours now. I'm having no luck

[BosBeer]

A little off topic but does anyone use Delhpi 7?

Used to... what's the problem?
I downloaded my delphi from the links mentioned here:
http://www.g0dnetwork.com/ucetut.html

The arrays all changed =/

Changed indeed but still similar to the ones of the open beta ...

@everybody: y r u giving out tips to find the crit/reload hack?
Like cilegray said, keep them private as much as possible or Trickster will be overwelmed with hackers like in MS >.>

[noobz91]

Lol dun be to extreme and treat the address like some valuable item >_> in the end it will still get leak out sooner or later.

[BosBeer]

I know, it's doomed to ... but now it's like not EVERY lion is a hacker xD

[cilegray]

Yeah, the longer this can last, the better for all of us.

[andrewangel]

Well 4 those of u who still seek for crit and noreload, just give up lolz. 1st thing, GM are seriously banning low lvls right now. If you are not like 80-90+ Don't hack. Reason is GM hope u will buy cashitems later.

And even tho i found the addresses, haven't used it since. Don wanna get accidently banned.

2nd thing. I made 60m+ in 3 days. Just with the drill address. Why? Cause a full luck lion always get craft custome items lolz. And been gettings 5 3 slot hat and shields recently. Witch hat can go up to 15m ^^.

Stop criticaling and go drill!

[darknessclaw]

may anyone post a tut for how to bypass for me with links to downloads and settings for UCE? please? thanks~

[iSlime]

well i tried finding the crit+reload by going through every single address in 47xxxx and 4exxxx (that didnt work out too well)

also im wondering is the address a jump ? my god i wanna lvl my lion so badly and im only lvl 17

other then that... back to the guessing... guessed about 600 addresses so far Lol

[tsj5j]

The address should be a jump (je).

[Marluxia]

Okay last hint ever and then im afraid it will have to be all on your own guys. Okay yes its a jump address, and yes the addresses are in relatively kinda close-ish proximatey to each other.

Just remember to look for certain 'patterns'. Similar to the pattern of the old addresses before open beta.

[darknessclaw]

may anyone post a tut for how to bypass for me with links to downloads and settings for UCE? please? thanks~

please? D:

[tsj5j]

One question though.

Is it a jmp, jne or je?

[janemba001]

Can you guys help me out now? Im kinda having troubles bypassing my engine...it keeps restarting after a couple of seconds...!!!

Im at the point where I can login and attach it but it restarts either when I attach it or a couple of seconds after that...any help?

[tsj5j]

Your engine's detected.

There are some strings in the kernel/UI thats being detected.

Go read up on UCE tutorials in the CE Forums.

Theres no other way others can help you.

[cilegray]

jne and je are both jumps

Correct me if I'm wrong but :

je - jump if equal
jne - jump if not equal.

Have fun!

[Red_titan]

correct according to a certain tut for coding

[chiharu88]

you can post the code if you want to,if for me i want to post it but since i cant re register my lion,i cant find the address myself and i do not play trickster anymore,ill just w8 for another server or its official release

[Kevins00]

First of all, I would like to give credit where credit is due.

BosBeer - Thx for providing me the arrays for everything listed here.
ME - For finding updated adresses and bypass method.
Dark Hacker - For stickying this thread for me. Thx!

Drill1 - 004B8989 tick SF and OF
Drill2 - 004B8A32 tick SF and OF

Item everytime - 00419EDC tick ZF

PLEASE DO NOT RELEASE MACHINE GUN AND CRITICAL. KEEP THOSE ADRESSES PRIVATE. THX

As for the rest, I'll experiment a bit, and i might release the other adresses, might not. Ok machine gun works, and I'm having problems with always critical, but so far so good. I'm not gonna release machine gun to the public right now as it's too devastator to the game. Maybe later.

Here are the settings for your UCE

General settings : Tick all
Scan Settings : x x _ _ x x _ x
File Associations : _ _ _ _ _
Code finder : use debug registers
Assembler : tick everything except the last box
Extra : Use Kernelmode Debugger

Use GRAPP 2.08 to bypass your CE and you should be ready to hack. Have fun.

http://www.gftracker.org/screenshot0001.jpg - Here's my proof. Taken less than 10 mins ago.



Hey cilegray, can you tell me the manuel to learn how to use CE? I just want to learn how the codes work. Thanks. :)

[illusionboy]

i think the best way here is just learn everything by own den u get wat it means..but i still dun get it on how to tick zf SF OF?can any one give a simple hint on this button to tick that?i think is a jump thing right?
sorry guys cause me first timer.u can flame me for wat i say :)

[Jhoen]

what should i search to find the reload/crit byte or array byte?? and if array byte can anyone tell me what value to input?

[cilegray]

Kevins00, you don't need a manual to CE, you need to read a book about memory editing via ASM (Assembly).

illusionboy, when you right click and select 'change register at this location' you have multiple boxes, just tick the first SF and the first OF. I "THINK" sf stands for signed flag and overflow flag, but I could be mistaken.

Jhoen : you have to either figure out how to find it, base yourself off the original string (a jump in this case) or an array of bytes which has been modified in the new open beta, and that is private at this point.

[lifetotake]

Is there a way to SEARCH for the specific jumps you're looking for? I swear reading through every last address is going to kill me! I've been through over 10,000 addresses since the open beta. I've not been able to find any feature in CE that allows me to search for specific jumps -_-.

[Jhoen]

can anyone give another clue to find the address im just a noob i dont know that much

[tsj5j]

Yea, indeed they are both jumps (je and jne).

However, theres a differentiation.

Can you give a hint what type of jump is it?

Theres lots of them (je, jne, jmp, jle, etc.)

[cilegray]

Somewhat allready mentionned a few pages back what kind of jump it was, and I don't know off-hand... and i'm at work.

So you'll have to flip back a few pages and find. And yes, there is a way in CE to search a specific string and return only the adresses that match your string

[tomoe]

lemme just ask is Pure miss hack really exisT?

[cilegray]

I've never seen it.

[Jhoen]

how about a fast cast or no cooldown?
doen this exist?

[tsj5j]

I've rechecked the thread a few times.

I cant find it mentioned anywhere.

Would appreciate it if you could post it asap. :)

Thanks.

[janemba001]

How can it be possible that the Dual Engine I have is detected? I mean Im using the same version and the same settings but it's still restarting me....???

[Red_titan]

Do you have the GRAPP?

[iSlime]

well is the address a je? or jne? anyways i am really close i have the no-reload hack addy but its not the one address with critical that someone mentioned before

[illusionboy]

How can it be possible that the Dual Engine I have is detected? I mean Im using the same version and the same settings but it's still restarting me....???

ya do u have the grapp?and hey the grapp some times when u press start the thing wun move..u have to press start again..den its start den u wun get restart

Kevins00, you don't need a manual to CE, you need to read a book about memory editing via ASM (Assembly).

illusionboy, when you right click and select 'change register at this location' you have multiple boxes, just tick the first SF and the first OF. I "THINK" sf stands for signed flag and overflow flag, but I could be mistaken.

Jhoen : you have to either figure out how to find it, base yourself off the original string (a jump in this case) or an array of bytes which has been modified in the new open beta, and that is private at this point.

Big THX cilegray.:) now off to get it work =D
oh ya i think theres something i wan to ask..
i found a add maybe is server side??i freeze it my bullets is gone.but after restart the bullets are there.but when i was freezeing it i set the value to 17225 lol noob's work...
the bullets gone.when i shoot its gives a msg ammunation is below something..not no bullets allocated.when i set to -1000 den i shoot only loading no bullets come out?at first the byte is at 1..isit it possible to make it unlimted ammo?

[BosBeer]

it sounds client sided, after u restart ur ammo back to normal ...
but might be on a good track, gl with it

[Red_titan]

i'm not sure if i got the critical hack. But i'm really close. i am criting like 60% of the time.

[janemba001]

Ok well I figured out my problem from last time...it was Dual Engine 1 lol!!! But I have a new problem though! For now with dual engine 2 and grapp I only see ??? (1) it doesn't say trickster.bin.....any help on this?

[Red_titan]

I have dual engine 5.3.393446 get it off this site

[Kevins00]

Kevins00, you don't need a manual to CE, you need to read a book about memory editing via ASM (Assembly).

illusionboy, when you right click and select 'change register at this location' you have multiple boxes, just tick the first SF and the first OF. I "THINK" sf stands for signed flag and overflow flag, but I could be mistaken.

Jhoen : you have to either figure out how to find it, base yourself off the original string (a jump in this case) or an array of bytes which has been modified in the new open beta, and that is private at this point.


Can you pm me how you find the address on drill cilegray? I really want to learn how you find the drill address. Thanks in advance.

[illusionboy]

janemba u had to type it... o_O

[lifetotake]

janemba001, do the settings for dual engine2. Open GRAPP, type in the target and tool processes. Press START. Open trickster updater. Click start. Login. Press alt+tab to go back to dual engine2. Click the computer icon. Click "Process watch". If you see question marks go SEARCH for the information, this is a problem due to your OS settings. Select Trickster.bin and click "Open Process". There is NOTHING wrong with dual engine2+GRAPP. I have been using it since I started hacking maple. It has NEVER failed me.



DualEngine Settings:
General Setting
[X] Show undo button
[X] Show advanced options
[X] Update the list of found addresses even after scanning
[X] Center blablabla Engine when bringing to front
[X] Hide some/all windows instead of trying to bring blablabla Engine to front

[X] Show values as if they are signed
[X] Show and work and binaries as if they are decimals

Scan Setting
[X] Fast scan on by default
[X] Enable Hyperscan when possible
[ ] Don't scan memory that is protected with the No Cache option
[ ] Keep low memory usage when doing an "Unknown Initial value scan" with Hyper Scan

[X] MEM_PRIVATE:Memory that is private
[X] MEM_IMAGE:Memory that is mapped into the view of an image section
[ ] MEM_MAPPED:Memory that is mapped into the view of a section

File Associations
[ ] .CT
[ ] .CET
[ ] .CT2
[ ] .CT3
[ ] .GH

Code Finder
[X] Use Debug Register
[ ] Memory Access Expections
[ ] Try to prevent detection of the debugger
[ ] Handle breakpoints not caused by CE

Assembler
[X] Show disassembler
[X] Show debugger options
(X) use hardware breakpoints (Max 3)
( ) Use int3 instructions for breakpoints (Ulimited)
[X] Replace incomplete opcodes with nops
[X]Ask for replace with nop

[ ] Try to prevent dectection of the debugger

Extra
[X] Query memory region routines
[X] Read/Write Process Memory
[X] Open Process

[ ] Undo changes to CE
[ ] Force memory to be writable in case the standard method is blocked

[X] Enable use of the Process Wathcer
[X] User kernelmode debugger options when possible

[ ] Stealth Mode (Usermode)
[ ] Stealth Mode (Kernelmode) [MORE] - [ ] Prevent all modules [ ] Allow all modules



If there is something you people do NOT understand now, you do not deserve to cheat on any game because you must not be bright.

-----------------------------------------------------------

I ASKED A QUESTION!!! Does anyone not know the answer!?!

[still_l3allin]

Ummm.....What program(s) do I need for this?

[BosBeer]

janemba:
U do know it's best to run Systemcallretriever the first time u use a new UCE? >.>
And as mentioned before, make sure to have the right settings...

Everybody:
STOP pm'ing me for the crit addy/byte array ... I'm not gonna tell, it's kinda getting anoying >.>, more then enough tips are been told!
Just be patient, someone will leak it soon anyway ...

[darknessclaw]

how do we know it's dual engine 2?

[tom55]

I am very close to critical attack, may I have a few more tips please?

[Jhoen]

i think im getting close to the no reload add is the crit add really close to the no reload?

[still_l3allin]

Can someone please PM me on what programs I need to even get started with this, and maybe a small tutorial on how to use the cheat?

Please, and thank you.

[Levithan]

i can't seem to run dual2+grapp.

[still_l3allin]

Where do I get UCE?

I have Grapp, and Dualeng. All I need left is UCE correct?

[Levithan]

Dual engine is an UCE.

[Red_titan]

Levithan what was that code for?

[tom55]

004B9E5E eip to 004B9F78.

Well i'll tell you its not critical attack. :wank:

[lifetotake]

That's Crit hit + Machine gun. It's the most kick ass hack address ever! You can enable all trickster hacks since that one only uses 1 break.

[deco07]

ok im really stuck wat do i need program wise and wat do i do???

[cilegray]

No actually what he give will give you a fatal exception and close the game.

[Red_titan]

search the forums and figure it out. don't beg.

[BosBeer]

I'm really surprised the real crit hack still isn't leaked all over the place :p
Nice job u all! ^^

Is 75% of the time missing pure luck? or am I on a good track for miss-godmode? ...

[darknessclaw]

lalala tick EIP lalala.


OMG I LOVE YOU!!!!

[tom55]

I'm really surprised the real crit hack still isn't leaked all over the place :p
Nice job u all! ^^

Is 75% of the time missing pure luck? or am I on a good track for miss-godmode? ...
I don't give a shit slut. Not like your going to release it to the pubic.

[Five5tar]

But even tho you find the address what do you have to tick ?
If its EIP what is that u have to enter in the box ?
I dont know much but a lil help would b cool

[cilegray]

BosBeer, pm me about your miss hack... i might be able to help a bit... and we need to work on 2.5 exp all the time :D

[andrewangel]

Lolz the code levi give out is not critical?

I tried it works perfectly. Consider it as officially leeked ^^

Tho it is different than the one i'm using.

Both doesn't give fatal errors

[tom55]

Lolz the code levi give out is not critical?

I tried it works perfectly. Consider it as officially leeked ^^

Tho it is different than the one i'm using.

Both doesn't give fatal errors

Dîck weed its not leeked, that's close but not it.

[Five5tar]

tom55 why do you think that your some special piece of shit.You that everyone starts as a noob in this hacking shit.You think that you some superior but you aint shit. Probably you dont even have them address and you act like as a ****.

[Levithan]

everything is gone.

[Five5tar]

004B9E5E eip to 004B9F78.

i went to addy 004B9E5E ticked EIP and entered 004B9F78 but for some reason it doesn't work.You think u can help me out Levithan ??

[chiharu88]

i still not tried it cuz i still dont hack my account but to remind u all,not all crit+reload hack is disame,is closed beta i used different address than freaky87 post here,so the address is likely disame in other crit+reload address,so dont u pll act like a god or shit that u know about something ok?stop flaming ppl everybody here start as a noob,if i go back playing again i migh give a try to find the address for miss god mode,eventually it has but not 100% and ive done it also in jTO but i dont know why i cant find it in eTO when i still play in closed beta,i think they have different address,just what i do in jTO is find the evasion u have then put a evasion equips so u can find it,then u can find it "what access this address"that the way that i find the miss god mode in jTO.hope u can find it in eTO.

btw if u cant find it,wait for the "noble,god or pro hacker x-11" to post his hacks in the next century!.hope u can w8 him to post that! lol

[tom55]

Sorry for bitching you guys.
Just that the "UBERS HAXXORS 111 nerd" is being protective over his critical melee attack address.

[Levithan]

004B9E5E is the no reload address, try to eip it to the critical gun address, which is the address that checks for a parity (jp). It should be a few addresses above 004B9F78.

Hope that helps, I can't give you the actual address since dualengine2+grapp doesn't work for me anymore. It only worked once for me. :/

[tom55]

I never have been talking about gun addresses. I would like the melee critical address please.

[Five5tar]

Hope that helps, I can't give you the actual address since dualengine2+grapp doesn't work for me anymore. It only worked once for me. :/

Probably i can give you my settings for dualengine2 cuz mine are different from what were said in the forums.My settings can also be used to bypass the GG of Maple Story.

[lohan]

<Major EDIT>

But xxxxxx (Removed by request from tsj5j) <EDITED>
And for critical. :)

I used the old [pf] method. (not 100% through)
Address?

:)

xxxxxx(Removed by request from tsj5j)

Since everything is leaked. no point keeping quiet :P

Happy hacking and get it patched big time.... haiz.

<To CileGray,>

If you dun want it to be leaked or ppl finding out.

DON'T RELEASE drill hack in the first place... *shrugs*

Any person with better IQ :P will know how to find the Machine Gun address with the Drill address.

You just have to compare it to the old address and see the pattern (diff/dist) between the address.. xxxx (Removed by request from tsj5j)... if you know what i mean

Although the new address is slightly down the lines.

And YET you tell them to look for Jumps............
Didn't that make things 10x easier??

Haiz..... I am always a slience observer of MPC forum... but.... what you did make me quite angry... now i can only sense a patch coming.


Sry ppl, I was told to keep it secret. And let you ppl find it out yourselves.
Anyway. It's relatively easy to get. Go look for old addresses (no need Byte Arrays) and see the difference (the pattern actually stayed for a few patches untill recent patch but new address is nearby)... that's all i can help.

[tsj5j]

Seriously, he did that because he wanted everyone to DO IT THEMSELVES.

Those who are lazy can get drill, they still don't lose out.

[lohan]

You know tsj5j..... those who are fast or lucky to be online just now, might already leak it to cheat engine.org or gamerzplanet...

I dun see the point to remove it, but since you requested... ok.

EDIT:
1 more thing to add, for those who manage to get the addresses just now.

Go to the first one and EIP it to the 2nd one will give machine gun and critical togther.

[Ruriko]

Can anyone make a prog that can setup a shop without using the main client. So I can save alot of ram and while vending I could play on another account.

[tom55]

lohan can you tell me the critical adress real quick please?

[lohan]

lohan can you tell me the critical value real quick please?

?

From your earlier posts. I was under the impression you already know the address?

And i saw you online when i posted it just now. Hmm.

Anyway, i tried to PM you but the system dun allow me to do PM with less than 15 posts..... never knew that.... i never posted except for today. And will not post again for a long time.

EDIT:

To tsj5j:

Saw your PM, ok i understand.

Guess you got the address just now :D Have fun hacking. :)

[tom55]

Well can you post it right now because ill catch it before it gets edited out please?

And i was online when you posted it i was just in the trainer section of mpc trying to find out how to put pointers in a trainer.

EDIT: Lohan please can you post it one more time I am refreshing the page a lot.

[lohan]

Oh. Sry. That's for gun, which you already know i guess. Sry for the misunderstanding.

But i tot i make it clear that it's Machine gun and Crit address.....
It only work for gun.

[tom55]

004B9E5E eip to 004B9F78 ? for Machine gun and Crit address for gun?

004B9E5E eip to 004B9F78 ? for Machine gun and Crit address for gun?

[lipsmacker]

is it true?that crit and machine gun hack is now in the same address!!plz dont flame me im a noob and poor in english... lohan can u plz post the address once again..thank you!

[illusionboy]

..eventually everything all leaked out.. lol
actually it should be kept less profile..cause the crictal is too crazy?i had tried mine.. using levi add.plus my no reload add.. i like a mad man shooting madly...what u see ppl is normal type...me lv 43 lion...my dmg all stick together..i can kill lv 109 mobs... in 3secs.. so i advise ppl here to keep it low.lol try drilling using cilegray add.. cause its help..i earn my lv 60 -70 guns in 10 mins.and 200k in 1 hr.

[cilegray]

<Major EDIT>

But xxxxxx (Removed by request from tsj5j) <EDITED>
And for critical. :)

I used the old [pf] method. (not 100% through)
Address?

:)

xxxxxx(Removed by request from tsj5j)

Since everything is leaked. no point keeping quiet :P

Happy hacking and get it patched big time.... haiz.

<To CileGray,>

If you dun want it to be leaked or ppl finding out.

DON'T RELEASE drill hack in the first place... *shrugs*

Any person with better IQ :P will know how to find the Machine Gun address with the Drill address.

You just have to compare it to the old address and see the pattern (diff/dist) between the address.. xxxx (Removed by request from tsj5j)... if you know what i mean

Although the new address is slightly down the lines.

And YET you tell them to look for Jumps............
Didn't that make things 10x easier??

Haiz..... I am always a slience observer of MPC forum... but.... what you did make me quite angry... now i can only sense a patch coming.


Sry ppl, I was told to keep it secret. And let you ppl find it out yourselves.
Anyway. It's relatively easy to get. Go look for old addresses (no need Byte Arrays) and see the difference (the pattern actually stayed for a few patches untill recent patch but new address is nearby)... that's all i can help.

I just wanted ppl to actually get off their asses and find them themselves. The method you used, I have been using for ages on MapleStory... and yes, it's damn easy. Too bad these noobs are all too busy waiting for us to spoonfeed them... they are really easy to find.

[lm47]

once it's leaked, there's no stopping the flood

lol, i guess it's back to the old days where every lion at phantom high critting all over the place ( thnx to beggars like tom55, now everyone with a lion can google it ^^). If your nice enough to give the address out to someone, do it with PM, don't post it...

i see either 1 or 2 things coming:
1. GM will start banning like crazy, there's gonna be a long list of banned people ( just like the gunbound ban list)
2. a new full client from eTO, that means the old addresses and value won't help, so better start learning ASM ( just like what International Gunbound did :) )

>bosbeer: if you only get hit when the monster crit (100% accuracy), then you basically got the miss-godmode, 75% miss is a lot, so gratz ^^

>cilegray: u got the party hack yet? if not, try having 2 computers and make party, then search for what accessed the "partied status"... i don't think changing map with an already-made party works...

[chiharu88]

there is no exp hack,everything is server sided,ive tried that before but nothin change,i only got the dynamic address but when i try it it just do nothin, this was discuss so long time ago since in the 1st trickster thread,but u can get a hint there on how to find the addressess in the 1st trickster thread

[lohan]

To Cilegray, and the rest.

Well, i released the address awhile back becos i felt that since half the equation was revealed, it's a matter of time that the other half will be found out.

Now, to think of it... it's quite true. People tend to be more careful & treasure on what they manage to obtain by erm.. hardwork... than hand-outs.

Although some things are undeniable... GG update and client patch are inevitable.

GG makes money by selling updates. Who knows? Maybe the initial hack address is release by a employee of Nprotect ( too far-fetched :P ). But GG will always update regardless of what we do... hack or not.

And Game Client update, well... every game have their game client update constantly.

So it's better for those who haven't have the address, go figure it out. 90% is there for you.... just try and get the 10% for yourself and then you will never have to ask again when GG/Game client update. I believe Cilegray is trying to teach you ppl how to fish rather than giving you ppl the fish. Once you figure out the logic, no more waiting for new address to be released next time.... and what's more... you may become better and figure out other hacks that we can't or didn't see.

Come to think of it, GG/Game client update is not the main problem... the main problem is GM awareness.

Oh last thing.... never report a hacker when you are a hacker yourself. (even if you dun have the hack, and feel piss off... just dun report another hacker) It's a vicious cycle, and the banned hacker will in turn report another careless hacker (which might be you, who finally got the new hack) next time and no one will be in peace.

P.S. I am trying to post more to reach the Quota to be able to PM..... 15 posts....... funny requirement.... >_<

[cilegray]

No actually what I'm trying to do is kind of have it this way :

Ppl who deserve to have the adresses have them
Ppl who don't deserve them don't have them.

But you obviously screwed this up royally. Thanks a lot *****

[lipsmacker]

i also do hack in closed beta..but im extremely careful doing it..usually i train at ruby server (which is less people)... and i suggest posting ur lion's name so we can party.. LOL

P.S. i still dun have the address for crit M.G is there sumone who can repost it!!thanks!!

[lohan]

No actually what I'm trying to do is kind of have it this way :

Ppl who deserve to have the adresses have them
Ppl who don't deserve them don't have them.

But you obviously screwed this up royally. Thanks a lot *****

There's no need to resort to name-calling, or use of vulgarites. Please act more maturely. Beside, no one deserves the name-calling more than you do. You are the one who LEAKED the drill address in the first place, and drop hints like candies.

Anyway, those who are surfing this particular section when i posted the addresses (which was there for less than 1hr before someone pm me to remove.)... THEY DESERVE it. why? They are LUCKY, that's why. Just like you did when some else posted the addresses way back at closed beta.

Never mind. I don't wish to argue further with you. The addresses will not be reveal again as long as our little arguement end with this post.

[lipsmacker]

hmm,, lohan can u plz post it for a little time..im in a computer shop so my time is limited..hope u consider my request..thanks again man!!

[tsj5j]

I doubt anyone sane will post it again.

Once posted, it will be leaked.

He/she's hard work will probably be gone in a flash if theres a full client update.

A full client update isn't hard, and can distort values and arrays of bytes.

Next time, there might not even be a release of drilling for people to work on.

[darkfly2]

Realy Nice wish 2

[lifetotake]

lol, Start taking every last possible note on the addresses now. There WILL be another client update to add "My camp" and "My Shop".

Dîck weed its not leeked, that's close but not it.

LMFAO, what'd this guy do? Look at it, test it, saw it work, got pissed?

[andrewangel]

Lolz its ok let him be...

Anyway one advice guys
I'll give u a screenshot anyway.

GM banned 5 ppl yesterday. And believe me!
They're invisible!!! And they move crazi fast!!!
My account's banned for 3 days now.

Well one of my account. Got 3 lvl 60 account. 1 banned, 2 left to lvl lolz... -.-

And yes the gm was drilling around me -.- lolz
http://img296.imageshack.us/img296/9575/screenshot0000ph6.jpg

[tom55]

HAha you can only see the Game Master's drill.

EDIT:

I won't be on for about 5 hours or 3 hours, I am restoring my whole computer. Not that any of you will care. ^_^

[lm47]

lol, Start taking every last possible note on the addresses now. There WILL be another client update to add "My camp" and "My Shop".


when they make us download a new full client, the notes would be useless since everything would be changed. Everything means it includes the ARR to the AYS, which can't be changed by lil patches, but only by a full client update :squareeyed:

however, i think all the attack cooldown related hacks ( including the reload and timed-crit, with the exception of meelee attack which is the majority) would be still clientsided, otherwise the server would waste alot of resources to handle or to check every attack. That means we can still search for these if there is a new client out, and hopefully we won't leak them again.

So pray for a full client update to stop the leak and start learning to read ASM :squareeyed: Now off to Pirate King online!

>chiharu: exp is indeed server sided, but i think the "partied status and how many people in the party" is client sided with the same reason above : the server won't waste resource to check these ... so we should try to manipulate what accesses the party status ( 1, 2, 3 people in party) instead of what accesses the party bonus (1.2x, 1.3x, 1.4x exp). That's my theory

[tom55]

I'm Back and now I have to download everything again. I'll be back to hacking soon.

[keisora4]

ok so i followed the steps that marluxia did and i still get that nprotect error..i've searched for 4 days now and now i'm finally posting about help..how do i pass the nprotect thing..

[Jhoen]

when will the next patch be release?

[huyn54]

how do u update old addresses

o btw if anyone can pm me about how to update the addresses ty im srry if im looking like a leecher, but i just got off hacking maplestory and way too many leachers there. So im very srry for being a leecher right now

[chiharu88]

even if they patch there still nothin will change unless they will change the version of the gameguard that they put now,thats the time the addressess will change

[janemba001]

Dammit!!!!!!!!!!!
One last thing! what's up with the Nprotect String box that pops up nowa days?! it just closes trickster after...no restarting???

[huyn54]

ok tyvm for the info

[illusionboy]

hmm learn alot here. lol even i got the drilling address -_- i still cant figure out how u get this address cilegray... i wonder why.. everytime i needed a value to search the excact add at 2 bytes,,,or maybe i put 0-1 and search .den i decrease and keep on decrease or increase or get a actual add.i still left with many add.but none of them = to wat it is.. hmm any hints on the default search number to make it happen? and every byte i should start guys?

[sailor]

hi i gess i am the first girl who ask help here in this forum i need 2 know how 2 get items allways when i drill
i did see those
Drill1 - 004B8989 tick SF and OF
Drill2 - 004B8A32 tick SF and OF

Item everytime - 00419EDC tick ZF

and i wana ask how do i set them up i did try to go to drill 1- 004B8989 tick SF and OF then Drill2 - 004B8A32 tick SF and OF i did put at EIP both of the 2 drils Item everytime - 00419EDC tick ZF with tick ZF so the window show as this
http://img137.imageshack.us/img137/6103/12bi9.jpg
i get critical; error when i do try 2 drill so plz can any 1 screen shot 2 me what i need 2 do

[janemba001]

I think for the item everytime you're only supposed to tick ZF and not OF and SF!.....try that and good luck! Im still getting the nprotectstring error!


http://i90.photobucket.com/albums/k279/janemba001/help.jpg

[cilegray]

I think for the item everytime you're only supposed to tick ZF and not OF and SF!.....try that and good luck! Im still getting the nprotectstring error!


http://i90.photobucket.com/albums/k279/janemba001/help.jpg

Try another newer version of gameResistance.

As for sailor, what you need to do is :

Goto Drill 1 adress, edit register.
Tick OF and SF and close.
Repeat same steps for Drill 2.

Then goto Item Everytime adress, and edit.
Tick ZF, and close.

YOU ARE DONE

The EIP is just for critical attack, not for drilling.

[sailor]

oh i did that now as u said but now every time i drill i get the note there is no item there
every single drill no item there guys u need 2 work on this 1 T_T it supose 2 give item every time but it do the other way no items at any place T_T
2 let u see i didnt do anything wrong i did like this:-
at Drill1 adress - 004B8989 tick SF and OF
same go for drill 2
at Drill2 adress- 004B8A32 tick SF and OF
then
Item everytime - 00419EDC tick ZF


this give me that note when u get back at same place no item is in there ................S.o.S drill hack plz :(

[tsj5j]

When it says item everytime, it means item every drill count used.
The item spawning is server-sided, and cannot be changed.

What you get INSTEAD, is a 100% chance of the drill warning you if the item is there... or not.
The rubbish icon means no item, and stops you drilling.
The light bulb allows you to drill.

If you get the light bulb, you have a 100% chance of getting an item if you drill correctly.

[Levithan]

Why not make it clear by naming it item detect? That's basically what it does.

[sailor]

so its not a drill hack then cuse every drill u do u waist 1 helth point so its like u use it 2 get only exp from drill and that is stuped so tell now there isnt a code for geting 100% item every time u drill
and that guy back there saying like wow i get 200k every 1 h well thats just a lie cuse i did use it and it dosent work T__T

[cilegray]

sailor I'm sorry but you're an *****.

Drilling where there's no items will take you a few seconds. Whilst using the item everytime ( I didnt name it, sorry) takes you only a fraction of that time to KNOW that there arent any items.

Items have a physical location on the map that you CANNOT change. So the best we can do is know before hand if there's an item or not, before we drill.

This DOES WORK, and it works WELL. You have no idea what you're saying you stupid little leecher, and it's not like you've done any work on your end, so just go die somewhere else and leave us alone.

[kidobito]

sailor I'm sorry but you're an *****.

Drilling where there's no items will take you a few seconds. Whilst using the item everytime ( I didnt name it, sorry) takes you only a fraction of that time to KNOW that there arent any items.

Items have a physical location on the map that you CANNOT change. So the best we can do is know before hand if there's an item or not, before we drill.

This DOES WORK, and it works WELL. You have no idea what you're saying you stupid little leecher, and it's not like you've done any work on your end, so just go die somewhere else and leave us alone.


Cilegray.... chill the hell out man. do u really need people to knoe ur a pro that badly? no one gives a shiit about leeching or what ever the hell u call it. everyone just wants hacks.
and what the shiit is "Putting in work"? wtf is that. i hope u reach master level in hacking soon lmao

[cilegray]

Cilegray.... chill the hell out man. do u really need people to knoe ur a pro that badly? no one gives a shiit about leeching or what ever the hell u call it. everyone just wants hacks.
and what the shiit is "Putting in work"? wtf is that. i hope u reach master level in hacking soon lmao

See that's the problem with you people.

Are we charging you some monetary ammount for the hacks that we spend time on finding and releasing... no. So can I at least ask the fvcking noobs to use their brain the slightest bit to figure the ***** stuff out by themselves ? The hell I will, and you're not going to do a thing about it.

I'm no pro... I just have something called common sense, and unlike most of you *****s on these forums, I tend to use this thing called a brain and actually figure stuff out by myself instead of waiting for someone to shove the fvcking spoon down my throat.

You sir, don't deserve to be helped, or given any info/hacks. You don't care about the work we go through to help you *****s... why would I need to care and respect you ?

Next time you post something, at least give it a little thinking over before you post, dimwit

[kidobito]

See that's the problem with you people.

Are we charging you some monetary ammount for the hacks that we spend time on finding and releasing... no. So can I at least ask the fvcking noobs to use their brain the slightest bit to figure the ***** stuff out by themselves ? The hell I will, and you're not going to do a thing about it.

I'm no pro... I just have something called common sense, and unlike most of you *****s on these forums, I tend to use this thing called a brain and actually figure stuff out by myself instead of waiting for someone to shove the fvcking spoon down my throat.

You sir, don't deserve to be helped, or given any info/hacks. You don't care about the work we go through to help you *****s... why would I need to care and respect you ?

Next time you post something, at least give it a little thinking over before you post, dimwit



to bad no one gives a shit what u think. i dont give a shit if u wanna help or not. get the hell outa here if u dont. why the hell are u even on this forum if u dont like leechers? u think this thread is suppose have only people that knoe everything about hacking? there wouldnt be any need for the thread in that case u retard

damn u dumb.

btw if u havent got these already

DE:
Reload: 004B9E5E tick:ZF
Crits: 004B9F44 tick:EIP (4B9F54)
Items: 00419EDC tick:ZF
GR:
Target: Trickster.bin
Tool: DualEngine.exe

Drill1 - 004B8989 tick SF and OF
Drill2 - 004B8A32 tick SF and OF


cit and reload in one
004B9E5E eip to 004B9F78

[barakTG]

is the crit only for the lion?

[kidobito]

yea dog its only for lion

[sailor]

what a stuped ideot u are cilegray dam u and your dirty mouth u ideot thats all what i have 2 say u rude ass

[cilegray]

kidobito, first of all your critical adress is wrong.

Second of all, you haven't understood a single thing in the 14 pages of this thread.

This is here for ppl to LEARN, not for ppl to beg and beg and beg and beg until someone is tired enough of the 100s of beggers like you that they actually just give it out.

I should be telling you, if you're not here to learn, then get the fvck out.

[banano]

btw...there's a compound hack. this bunny compounds stuff herself and has shit like 130% ele blade, 170+ might ring.. all that ^^

any idea how to find these addresses ?

[DustMite]

I'm getting the Nprotect string error. Anyone know how to fix? Also, what is the most current version of Game Resistance? Thanks.

[kidobito]

kidobito, first of all your critical adress is wrong.

Second of all, you haven't understood a single thing in the 14 pages of this thread.

This is here for ppl to LEARN, not for ppl to beg and beg and beg and beg until someone is tired enough of the 100s of beggers like you that they actually just give it out.

I should be telling you, if you're not here to learn, then get the fvck out.

nuthin i put up is wrong. and im done talkin to ur gay asss


and what bunny got compound hack? i heard it was out but never saw

[tsj5j]

kidobito, you are the gay ass here.

You released some hacks just to spite others off.

You wasted many people's effort.

You can say WHATEVER you like, you're just a noob hankering for some fame.

You think others are selfish? You are the selfish one here.

You are doing more harm by sharing.

And by the way, you should really do abit of reflection.

Your spelling sucks, grammer is inaccurate and I doubt you even learnt english properly.

Seriously, you sound just like any other noob who can't think/fend for himself.

Please don't use such methods of releasing to try to gain 'fame' or respect.

You don't deserve anyone's respect.

[lifetotake]

Yo, I'm working on an AA script for all the drill hacks, but for some reason GG gives me that detection string box thing-a-ma-bobber. Can someone tell me what I did wrong in this?

(Also I am using the latest verion of GR and DualEngine.)
[enable]
00419EDC: //Item every time
JNE 00419f47
004B8989: //Drill 1
JGE 004b89a1
004B8A32: //Drill 2
JGE 004b8a4a
[disable]
00419EDC: //Item every time
je 00419f47
004B8989: //Drill 1
jnge 004b89a1
004B8A32: //Drill 2
jnge 004b8a4a

[tom55]

Here kidobito I fixed up the way you displayed your addresses.


HACK: ADRESS: ACTION:

Items: 00419EDC Tick: ZF
Reload: 004B9E5E Tick: ZF
Drill1: 004B8989 Tick: SF and OF
Drill2: 004B8A32 Tick: SF and OF
Crits: 004B9F44 Tick: EIP 004B9F54
Crit/Reload: 004B9E5E Tick: EIP 004B9F78


I grouped them by action and evenly spreaded them.

[andelius]

Hi, it's my first post here, i've been more of a spectator.

I wanted to try the DualEngine and experiment with some of the stuff you guys are talking about, but i run into a couple problems.

1. Can't find trickster.bin
2. Found it in the long process list, but there's like 10 of them
3. Found 1 in the "Process Watch" list, and tried to attach to it, it gave an error instead, it reads: "Attach Failure-DualEngine failed to attach to the process. (Error=6)" and error=5

and a second message: "The thread that was supposed to attach the debugger to the process failed."

Has anyone gotten these problems before? how do you solve it? what the hell are errors 5 and 6?

thanks for your reply

flames welcome


Edit: People keep mentioning Tick: ZF/SF/OF/EIP. Where do you tick it...?

[lifetotake]

Hi, it's my first post here, i've been more of a spectator.

I wanted to try the DualEngine and experiment with some of the stuff you guys are talking about, but i run into a couple problems.

1. Can't find trickster.bin
2. Found it in the long process list, but there's like 10 of them
3. Found 1 in the "Process Watch" list, and tried to attach to it, it gave an error instead, it reads: "Attach Failure-DualEngine failed to attach to the process. (Error=6)" and error=5

and a second message: "The thread that was supposed to attach the debugger to the process failed."

Has anyone gotten these problems before? how do you solve it? what the hell are errors 5 and 6?

thanks for your reply

flames welcome


Edit: People keep mentioning Tick: ZF/SF/OF/EIP. Where do you tick it...?

This is not a support thread for how to use your UCE =/. If you don't know how to use it Click Here (http://www.mpcforum.com/search.php)!!!!!

[sailor]

Crits: 004B9F44 tick:EIP (4B9F54)
cit and reload in one 004B9E5E eip to 004B9F78


is the first code like the second 1 critical hits for lion ?
i use the second 1 what is the first 1 ?

[cilegray]

The first one is useless because it's a waste of a debug register.

Yes, they are the same thing. I believe 4B9F44 just 'mov's itself into 4B9E5E so wether you fix its value in one or the other... it will result in the same thing

If you use 4B9F44, it will mov it's frozen value to 4B9E5e.
If you use 4B9E5E, it will replace the value mov'd by 4B9F44 instantly by what you freeze your EIP at. Either way, it's the same difference.

[kidobito]

kidobito, you are the gay ass here.

You released some hacks just to spite others off.

You wasted many people's effort.

You can say WHATEVER you like, you're just a noob hankering for some fame.

You think others are selfish? You are the selfish one here.

You are doing more harm by sharing.

And by the way, you should really do abit of reflection.

Your spelling sucks, grammer is inaccurate and I doubt you even learnt english properly.

Seriously, you sound just like any other noob who can't think/fend for himself.

Please don't use such methods of releasing to try to gain 'fame' or respect.

You don't deserve anyone's respect.


I cant spell? ok so can u please tell me what "hankering" is u dumb shit. ur pretty gay too btw. what you wrote makes no sense what so ever.... idc if u internet people respect me. why should anyone. people come here to get hacks, not to be sucked up to by their fellow internet buddies. gain fame? u must be joking :laugh:

how long does it take to get some fame around here lmao;) :\

thanks for fixing up that shit tom55

[lohan]

Here kidobito I fixed up the way you displayed your addresses.


HACK: ADRESS: ACTION:

Items: 00419EDC Tick: ZF
Reload: 004B9E5E Tick: ZF
Drill1: 004B8989 Tick: SF and OF
Drill2: 004B8A32 Tick: SF and OF
Crits: 004B9F44 Tick: EIP 004B9F54
Crit/Reload: 004B9E5E Tick: EIP 004B9F78


I grouped them by action and evenly spreaded them.

:confused:
Well, at the end of the day... it's all out.

To: Sailor

Hi, nice meeting u in game :P

Anyway, the crit address on top is a waste of the register, using alone. People gonna realize u hack anyway if you critical 100% of the time.

As for the Crit/Reload listed above.... mine's is not the same (the second half is diff for mine), so i dun know if it works. All i can say is.... everything you need is there. Play around with it abit.

:)

[sailor]

haha well hi lol ya i did try it its stuped its a critical hit but without reload as u said ppl well tell that i hack cuse every shot is critical... lol so better use the better 1 the second 1 with no reload

btw i rlly dont play much in the lion i did use this hack only 2 lv my lion cuse hard 2 lv a luck lion ya i put pure luck meens i dont hit nothing low damege rlly low eaven with the critical shot all of this cuse i play 2 mages i have lv 72 and 63 i need the lion for good chance of compunding thats all :)
as i know pure luck player is dam rich ass will i wana be that ^^ lol

[DustMite]

I cannot get my GRAPP 2.08 to start. I click start, and its still black and not grey. Anyone help?

[tom55]

All the addresses that I posted are all working. Well im a lion and they all work for me atleast. ^_^

[pedrinhoo2jamnx]

No have hacks for dragons? :DDDDD
thanks for the hacks... please find a hack for dragon haha!

[tsj5j]

I suggest that you party your dragon with a lion, and use your lion to level your dragon up.

[pedrinhoo2jamnx]

my friend have seen a dragon with hack..
he give 5 criticals in 1sec -_-

[Levithan]

All the addresses that I posted are all working. Well im a lion and they all work for me atleast. ^_^

what exactly did you post?

004B8A2F eip it to the address below it in the memory view.

[andelius]

I cant spell? ok so can u please tell me what "hankering" is u dumb shit. ur pretty gay too btw. what you wrote makes no sense what so ever.... idc if u internet people respect me. why should anyone. people come here to get hacks, not to be sucked up to by their fellow internet buddies. gain fame? u must be joking :laugh:

how long does it take to get some fame around here lmao;) :\

thanks for fixing up that shit tom55

han‧ker‧ing  /ˈhæŋkərɪŋ/[hang-ker-ing]
–noun
a longing; craving.
[Origin: 1655–65; hanker + -ing1]

—Related forms
han‧ker‧ing‧ly, adverb

—Synonyms desire, need, yearning, hunger, yen, thirst.

[tsj5j]

Thanks andelius for providing the definition.

I believe its not necessary to waste my time arguing with a certain worthless someone (not saying who).

I dont want to start a flame war.

[andelius]

ARG! this is so frustrating! i got dualengine to work, and I wanna search for my own hacks, but all the tutorials just tell you the addresses to type in, THEY DON'T TEACH HOW TO SEARCH? GAH!

if anyone can PM me or lead me to a tutorial where they teach you how to search for addresses, or give me some lessons, that would be highly appreciated.:bunny:

[cilegray]

andelius, there's a tutorial that comes with pretty much every version of cheat engine that lets you learn basic searching, but really... every hack is different and it comes down to common sense for what to search.

[myloveaudrey]

GG updated, anyone have an idea what was patched?

[cilegray]

I'm an id'iot... move along >.<

[myloveaudrey]

[QUOTE=cilegray;1556918]What revision is it now ? I don't play maple anymore....

I know for a fact that GRAPP 2.08 will work with rev 845 as seen on trickster.[/Q seems liek it's 845, like u said, and i meant GG for trickster not maple.



ehh messed up teh quote >.<

[cilegray]

And I messed up the post completely I thought i was in another section. GG didn't update for me anyways.

[myloveaudrey]

ah, kk well nothing was patched for me regardless, least not anything i use.

[pedrinhoo2jamnx]

exists god mode hack?

[andrewangel]

Well let's hope there will be an update on addresses without changing the gameguard version.

Heard the newest's 875 or sth around that.
Don have any UCE 4 that high anymore lolz >.<

[myloveaudrey]

exists god mode hack?

yes there is

[andrewangel]

Btw does anyone else wanna lvl?

Lolz its getting pretti boring kill in the dungeons now -.-

More lions come!!

Let's make a 2.5exp hacking parti lolz

[sailor]

http://img86.imageshack.us/img86/4397/34sp0.gif




really not worth it.. i only play lion so i get lion luck and start 2 compund my mage items i play mages but need luck 2 compund now my account got blook 2 days...............
gm's is sneeky befor it got blook game did restart alone but i did setup the hack again second time i loged i got this note
so guys when your game sudenly restart meen dont log back in the hack..

[sailor]

:( :( :(

[tom55]

Well im about to be banned, next day or so. Sailor_Moon_Girl reported me 8 time on 3 accounts of hers.

So watch out for her. I'm not banned yet I had enough time get my 7 million onto a new account that DIffers from tom55 because thats a little obuvius.

And i had a nice little talk with Sailor_Moon_Girl and she was threating me. And see says she and her GM friend moniter this forum, to catch hackers. So never post your name.

I was level 32 with 7 million(SAVED IT WOOT) and about to be banned and i will keep on hacking, im not mad at all.
^_^
I can replace everything before the patch like in 4 days ill be level 32 and everything i have, but with 14 million! And i'm even more happier because I can do all the same Quests again!

Edit:
Hey salior i talked to Sailor_Moon_Girl some more and see said she got you banned. =P She also said she got 6 other people banned using mpc.

[sailor]

crap i didnt save nothing like u T__T that bitch

[andelius]

they're patching the game today... would that affect the hacks?

[cilegray]

Lol Sailor_Moon_Girl ? What level is she... I haven't seen her on, but im lvl 6x maybe she's lower or something... Anyways it only took me about 15-20 hours to get lvl 6x with hacks of course but if you DO get banned who cares. Oh, and normally they temp ban you for 3 days >.<

And yes, the patching will more than likely affect the adresses for the hacks.

[sailor]

the bitch is lv 72 i did party with her once i dont know what lv is she now tho and she is 1 of the gm friends i hait her she took my name i am the ORGINAL SAILOR BTW SHE STOLE MY NAME WHAT A BITCH!!

[lm47]

lol, pwned :dead:

and i don't think they temp ban players who hack. If you still be able to log in 3 days later, all the chars on that account would be level 2 as they did that to someone before =)

[sailor]

dam the drill hack dont work......... hmm then i gess also the critical dont work 2 T___T :( dam the gm's out there

[lohan]

Sailor, you got banned? Weren't you online yestersday?

This is really bad.

GM awareness had increased alot ever since KIDOBITO
leaked everything. I noticed alot of new lions being created after the leak.

I hate to admit it but addresses should be kept private like tsj5j and cilegray suggested.

And I hope GM dun ban ppl just by screenshots posted in their forum. Actually, if they do, i am good at photoshop, maybe we can frame that Sailor_Moon_Gal.

If it's like MapleStory where the GM need to catch you themselves, then tom55 should lay low for now (8 reports probably get tons of attention). Transfer the item asap. And re-train a new char. You can always use the old one as storage or whatever.

Lastly, Never reveal your IGN here, since that Sailor_Moon_Gal check this forum.

[cilegray]

Anyways, hacks all work exactly as before. Adresses have changed (of course) but, that's up to you now.

Have fun

[lohan]

Those ppl who wish/want to have the new address and can't get.

Please understand that we don't wish to create higher GM awareness.

The method to obtaining them is already there. So try to figure it out.

And again.

NEVER report a hacker if you are a ex-hacker yourself or if you can't hack now.

Edited:
Sailor... you went offline.... anyway, if you see this. Try to accumulate 15 posts, and PM me. I am trying to make 15 posts too now.