[Download] FusionTHZ 4.2 for Tremulous 1.1

[Ping_pong]

Download it here!

How To use this hack:
-Download the hack
-Extract the hack to your tremulous folder where "tremulous.exe is located"
-After that start "tremulous.x86.exe"

And there you go :)


-------------------------------------------------------------------------------
| |
| THZ 4.2 - Linux / Windows Release |
| by Undergamer in '08 |
| |
| All code for this hack falls under the GPLv2 license. |
| Patches to SVN755 can be found in the ./code directory |
| |
-------------------------------------------------------------------------------

TOC:
I. Installation
II. Readme
III. Cvars
IV. Troubleshooting
--

i. Installation:

Unzip file into your base tremulous directory.
Run tremulous.x86.exe if you run windows or ./tremulous.x86_64 if you run linux.

Open the console and type "/bind mouse2 +aimbot" to make the aimbot turn on when you press that button (mouse2 in this case).
Remember to bind another key to secondary attack "/bind aux2 +button5". This will setup another key to charge up for a pounce (AUX2 is the 5th button on some mice).

ii. Readme:
New features in 4.2:
- Added new cvar to change color of model if its behind a wall.
- Fixed the model bug.
- 64-bit linux client

New features in 4.1b:
- Works in windows now.

New features in 4.1:
- Projectiles now show through walls properly.
- Healthbars now show through walls.
- Fixed several UI bugs.

New features in 4.0:
- Uncheat-protected all cvars
- Added additional UI enhancements {kills to stage, and stage}

New features in 3.1:
- Fixed projectile wallhack
- Player HP shown in ESP string

New features in 3.0:
- Fixed alien aimbot (use n_aimmode 2 for targeting humans)
- Added egg count to top of radar (toggle between different display modes with n_radar 1 and n_radar 2)
- Enhanced aimbot

New features in 2.5:
- Aimbot prediction
- Player ESP
- z-adjust
- Wall detection

Features in 2.1:
- Aimbot
- New/enhanced radar
- Anti-camera shake (many but not all instances have been fixed).

Features in 2.0:
- Wallhack
- Building hp hack
- Glowing player models


iii. Cvars:
{Radar}
thz_radar default is 1, shows new style radar
thz_radarWidth default is 75, width of new radar
thz_radarHeight default is 75, height of new radar
thz_radarX default is 10, x offset of new radar (from top left corner)
thz_radarY default is 125, y offset of new radar (from top left corner)
thz_radarrange default is 2500, will control range of radar.

{Aimbot / Game enhancement}
thz_fov default is 15, (in degrees)
thz_aimmode 0 = off, 1 = alien, 2 = human
thz_aimthru 0 = no, 1 = yes
thz_zadjust default is 0, will adjust up or down the aim vector manually
thz_predict default is 1.15
thz_bobbing default is 0, will reduce a great deal of camera shaking
thz_norecoil default is 1, will reduce camera shaking

{Game enhancement}
thz_walls default is 1, wallhack
thz_healthbar default is 1, healthbar hack for buildings only
thz_scanner default is 1, will show scanner regardless of equipment or team
thz_glow default is 1, will make players glow green or red depending on team
thz_esp 0 = off, 1 = on
thz_glowdiff 0 = off, 1 = on

iv. Troubleshooting

Q. My options screen wont show up.
A. Use a standard resolution (640x480, 1024x768, 1280x1024, 1280x768, etc...)

Q. My aimbot dosent work
A. Make sure you bind a key to +aimbot in order for it to work

Q. My aimbot targets the wrong team
A. Make sure you have the aimmode set correctly

Q. The hack wont start, or it crashes.
A. Make sure you have the hacked 'qvm' files inside the ./base/vm directory inside your main tremulous directory

Q. I get banned for being too good almost immediately.
A. Turn off prediction on the aimbot so you get fewer insta-kills on dretches etc.. It will still be very effective against S3 aliens since they are huge.

Q. I cant pounce anymore.
A. You binded mouse2 to aimbot... Bind that key to +button5 to get it back to secondary attack.

[Air94]

Hey!
one question, what are the Cvars?
THX

[Ping_pong]

Hey!
one question, what are the Cvars?
THX
Cvars are variables that the hack use.

Example:
b_aimbot = true / falls (This turn on and off your aimbot)

b_aimbot comes with the hack you downloaded and this cvar and can be scanned and detected by some servers.

[shadowlordme2]

umm... the hack is really good and all but why is tremulous so hard to hack? is it cos of the servers and things like that cos i can only hack my server

[mjq20]

how do u set up?

[Raffle]

i got the aimbot but how do i turn it on?

[Ping_pong]

i got the aimbot but how do i turn it on?
Edited the main post for your answer :D Took me one month to create that. Myeah!

[H4><0R]

none of the cvars work >.>

Cvars are variables that the hack use.

Example:
b_aimbot = true / falls (This turn on and off your aimbot)

b_aimbot comes with the hack you downloaded and this cvar and can be scanned and detected by some servers.

also these cvars cannot be detected by any server, they are private client-side vars

[Liberator]

the servers are not showing y is that?

never mind

[lwd78]

setting up aimbot

1:make sure u put him on
2:en dan do in console /bind (a key) +aimbot

[fghsdf]

Greetings,
I use the Thz client because it gives me 60 fps more than the original. I dont knwo why but thats a pretty nice feature. Now my problem is, I cant shut off the wallhack and radar hack. I set the variables to 0 but that doesnt have any affect.

[tiberiu105]

where do i get tremulous aimbot?

[dop182]

Hey, tnx !

Also executable need of backport ! you know ? for register in servers

[]s

[dop182]

'$ sudo ./tremulous.x86_64
./tremulous.x86_64: ./tremulous.x86_64: cannot execute binary file'

32bits, dont use ?

[dop182]

This aimbot is freak !

hahaha

[qqq1996]

Im trying to put oticz hud and this aimbot , but when all files that oticz needs to work , are where they supposed to be, and when i start aimbot it just bugs in the screenthing where is the 'doll' and dark legion thing

Is it just impossible to have oticz and thz same time?

[darkmecha]

hey ive got it and the wall hack and shit is all up but how do i turn aim bot on?

[Takanakki]

How i can make aimbot aiming to head? Now it aims to waist, and its too slow to kill...

Oh. And how i can turn off those playernames, like all names shows trought walls etc..?

Edit: Okay, i got the names off, but aiming to head is still mystery..
And, what is key for left alt? :D