Ratbot That Works On Reconnect Servers!! (Quake 2 Stuff) [Archive]

bogtown

21st June 2002, 05:37

http://www.hardmobq2.hpg.com.br/quake2crk.zip

I was browsing recently and came upon a link to this site. The cracked quake 2 simply change the reconnect command > connect so when the server reconnects you, you still connect to localhost and ratbot still works fine :D

**DP**

21st June 2002, 21:54

When I enter a server it says " BLABLA is using a speedhack!"
and after that I get disconnected :)

slarted

22nd June 2002, 01:57

what is quake 2??? get with the times get quake qorld!!

bogtown

22nd June 2002, 02:00

ok about the speedhack question i can only guess the server detected you speeding try fidling round with the timescale command or velo one.

timescale -> velo (speed hack: velo 2)

slarted theres plenty of qw cheats out there just go to http://qwcheats.orcon.net.nz

full list of commands in the hacked client

connect -> cconnect
reconnect -> connect
reconnect -> reconnect
timescale -> velo (speed hack: velo 2)

kick crack (anti vote kick)
map crack (anti map size confirmation)

bogtown

22nd June 2002, 02:05

oops i was just looking across the files did you exec q2crk.cfg???u need to exec that to stop getting kicked

slarted

22nd June 2002, 02:09

where can i d/l q2 i feel like playing it :D:D

KiLlMaD

22nd June 2002, 10:55

warez .. don't evam post that again

s0ulzslave

22nd June 2002, 18:04

Originally posted by KiLlMaD
warez .. don't evam post that again

omg lol? warez??! are you some d0rk.. thats not warez if they provide hacked quake2.exe, if it is then every f00king hacks are warez.. think about it

zimmer

23rd June 2002, 03:49

Originally posted by slarted
where can i d/l q2 i feel like playing it :D:D

soul i think he was talking about that...

Hyjinx

23rd June 2002, 11:21

q2 is open source now u can prolly get it in lots of places then recompile it. Due to q2 being open source one could thereby download any version of q2 from anywhere and it wouldn't be considered warez. Its basically freeware

Boxing Ghandhi

24th June 2002, 19:10

Thanks alot, but I can get the console to work with quake2crk.exe ... help? :-)

s0ulzslave

24th June 2002, 21:41

sorryyh, i read that message too fast and didnt see the fact. Shouted without reason for you Kilimad :( loves ya still hunny! ;)

jessie1

24th June 2002, 23:34

can someone please help me use this.
yes the wallhack works. but i wanna use the bot on reconnect servers. i put the exe and all the stuff in quake 2 directory when i start quake 2 or launch it from ratbot. it doesnt work. it only displays the menu . no matter what button i press. even if i press ` this button it displays menu.
so please help me.
thanx:bunny: :dead:

bogtown

25th June 2002, 07:28

For a start dont use the ratbot to launch quake 2 just open q2crk.exe and make sure q2crk.cfg is in the /baseq2 directory. I found i could get to the console on the q2crk.exe by just starting a single player game from the menu then hitting the console key when the map is loading. Then its just a matter of connecting to the bot and your away.

KiLlMaD

25th June 2002, 21:23

hmm we don't have no q2 mods around here ... so .. i cannot help u :(

/me cannot remember q2 that well :( ( very old game )

jessie1

26th June 2002, 02:08

bogtown!

do u use the q2crk.exe for quake or the original exe.
how it work. i tried to use both but nonoe help
so here is what i do.
1) put the cofig in baseq2 folder
2)start ratbot
3) now i dont knwo what to do. do i use the q2crk exe from desktop or use the q2 real exe then go in the game and press ctrl+v or do i use ratbot to launch it.
please i am in need of a good bot and this is the one

thanx you very much and keep up the good work.
hope u will post some more hacks and paks for quake2 thanx.

bogtown

26th June 2002, 03:41

Use the q2crk.exe and when connecting type a "c" first then ctrl+v, hit enter and it should connect to the server.

jessie1

26th June 2002, 07:03

omg thank you very much man.

u r the best. do u know any more cheats or paks. thanx c ya.

btw: this post should be sticky.. best post for da q2 players

inj3ction

26th June 2002, 09:09

yo i use "The All Seeing Eye" and i use the q2crk.exe to run the serevr, well when i try to connect to a server nothing happends, its just there, and when i type connect and the servers ip still nothing happends, even when i type reconnect it says unknown blah blah blah, someone help me please thank you!

bogtown

26th June 2002, 09:41

the "connect" command is replaced with "cconnect" thats how it gets past the reconnect detection. Sorry you won't be able to use all seeing eye for it just start q2crk.exe manually

inj3ction

26th June 2002, 10:05

i connect to a server and it said, [BW]Admin - <name> is useing a speed hack! LOL! anyway to fix that?

inj3ction

26th June 2002, 10:35

NM i fixed that but now i cant get the aimbot working how do i do that!? it says somthing about

"RatBot +use servers"
AND
"alias +tiro "+attack;+use"
"alias -tiro "-use;-attack"
//Shoot button
//-------------
//bind mouse1 "+tiro"

DONT KNOW WHAT ANY OF THIS SHIT MEANS!!

jessie1

26th June 2002, 20:44

dude u have to start ur ratbot to make the aim work.
and if u found this that i assume that u know hwo to use ratbot/
and if u dont then go hwere www.come.to/rbot. and there it is.
have fun

Katzenfresser

27th June 2002, 01:26

i allways kicked from game :-(

is there no aimbot without botdetected??

what can i do ?

Katzenfresser

27th June 2002, 01:31

Originally posted by jorge
i connect to a server and it said, [BW]Admin - <name> is useing a speed hack! LOL! anyway to fix that?

HOW YOU FIX THIS ???
i allways have this Message and they kicked me out :-(

jessie1

27th June 2002, 07:03

bog town!
it was working well till it messed up i dont know waht happened but now when i go to game as normal it wont let me ctrl v so i cant connect . i tried reinstalling but still no help. also after i close the ratbot it closes but stays in threr wasting 6 megabytes of my memory.

anyideas thanx for help

jessie1

27th June 2002, 07:08

nevermind brother!
i figure it out hehe thanx. u see i set it for compatible for 95/98 and i use xp ..
thanx

btw u know where to download a worksing speed hack. IBO speed hacks dont work. and btw if this is wrong asking for please bann me

bogtown

27th June 2002, 07:59

This speedhack works for windows 98 it speeds up the windows clock speed and makes q2 go fast as well so you move real fast. I dont think it works in xp tho, but you could try. Im pretty sure it dosent get detected though.

bogtown

27th June 2002, 08:02

Oh yeah as a side note I 'heard' that someone, had modified a quake2.exe so it could get the server to give it the rcon password on any server! I have no idea where to get it from tho, if anyone has it post it up!

inj3ction

27th June 2002, 12:32

I have a probelem i use the q2crk.exe to join games and crap and i connect just fine, but when i try to use the ratbot with the q2crk it doesnt work, i open both ratbot and q2crk but that auto aim doesnt work anyone know how i can activate it!? THANKS!

jessie1

27th June 2002, 17:40

jorge!

first do u know how to use rat bot just opening it wont work
u have to put ip in and ssettings to make it work

inj3ction

27th June 2002, 22:43

yea i know that, but then what do i launch with that? And if i do what about the q2crk.exe? Dont i have to open that as well?

Katzenfresser

28th June 2002, 03:41

My Ratbot and cracked .exe works fine
BUT when i join a Game they detected allways my BOT with message like:
......is a cheater and kicked me out from game
you have the same problems? and what i can do against kicking?
Is ther no ratbot which works ok?

inj3ction

28th June 2002, 17:54

if you get detected with the bot you porbably havent typed "set timescale 1" that passes the server's bot protection. But i have yet found help on what do i have to do to get the aim bot working from the q2crk.exe. Do i open RATBOT and launch from there and then connect to that same server with q2crk.exe or what? Someone please write back.

cheeter

29th June 2002, 06:48

How to use this Hack:

I assume all of you have downloaded this thing: http://www.hardmobq2.hpg.com.br/quake2crk.zip

1) Unzip the quake2crk.exe into your Quake folder (I make a backup of the original quake2.exe and then rename the quake2crk.exe to quake2.exe)

2) Put the q2crk.cfg into your BASEQ2 directory. It is important that the commands in this cfg get executed before joining a server or else you will get kicked for having a speed cheat.

3) Now click on Ratbot.exe and enter the servers Ip address, etc. I would recommend leaving the name fields blank. Now go to the options menu and click everything off except force port and move human. Remember to set the port in this menu to something other than the server's port (obvious)

4) Hit start, then launch. You will get the quake2 console. Now type "exec q2crk.cfg". Then type c then CTRL+V, this will paste an address for you that ratbot uses to set up the proxy. it should look something like "cconnect 127.0.0.1" (Ip address I mad up) Hit enter. You're done.

This Ratbot works on mods such as action quake 2 and rocket arena but doesn't want to work on mods such as Gloom.

Sometimes when the server switches maps, quake2crk.exe won't load the new map. Just hit reconnect and you be back in.

Katzenfresser

29th June 2002, 22:10

Thanks
But when exact i type "set timescale 1" ? In the Konsole during the Game start ?or when? or can i binding this?

And what you have in Options in FOV ? 90 and 90 ?

and Impulse autofire i have 150 / 151 what is this and is this ok?

sometimes Bot works but most time they detected me :-(

ELX[ReapeR]

29th June 2002, 22:59

This thing chrashes for me... :(

**DP**

30th June 2002, 00:54

Originally posted by Katzenfresser

...
And what you have in Options in FOV ? 90 and 90 ?
...

You can see fov as range, the higher the fov, the larger the range of the bot. So when you have fov 180 you're bot is making very obvious hits, so people will see you have a bot.
When you have fov 20/20 or 10/10 it will look less obvious.

unfunf

4th July 2002, 09:07

try 8 like ogc? :o

gamespy3d

7th July 2002, 20:20

when i try to start
Quake2crk.exe
i get the error
"couldn't fall back to software refresh"
im using XP..

aassddff33

8th July 2002, 09:16

anyone know where to get a wallhack that will work with q2 pball?? please tell me

aassddff33

8th July 2002, 23:22

can someone tell me how to get the wallhack with the quake2crk.exe working??? i just don't know what i need to do

inj3ction

12th July 2002, 06:12

How do i turn the bot off? i know how to turn it on already but dont know how to turn it off, is there anyway thanks!

BeN DoVeR

12th July 2002, 20:59

Originally posted by jorge
How do i turn the bot off? i know how to turn it on already but dont know how to turn it off, is there anyway thanks!

drop the console and type "impulse 151" that should turn it off

ELX[ReapeR]

13th July 2002, 02:00

Originally posted by jorge
How do i turn the bot off? i know how to turn it on already but dont know how to turn it off, is there anyway thanks!
I always alt-tab to change Ratbot settings. ;)

inj3ction

14th July 2002, 02:49

Yea Ben Dover nice man, you almost got me HAHAHA..... SIKE! BITCH

Boxing Ghandhi

17th July 2002, 20:32

I got the wallhack working... haven't really tried the ratbot, won't bother either.

Thanks for the cheat!

Btw, is there any gl_modulate cheats?
In ActionQ2, the often limit the gl_modulate to like 2.5, so I need something that hides my real gl_modulate, and sends a fake one.
Anyone got any ideas?

Katzenfresser

19th July 2002, 02:53

i do this all but Bot still works not on all servers

this works only on few servers??

Originally posted by cheeter
How to use this Hack:

I assume all of you have downloaded this thing: http://www.hardmobq2.hpg.com.br/quake2crk.zip

1) Unzip the quake2crk.exe into your Quake folder (I make a backup of the original quake2.exe and then rename the quake2crk.exe to quake2.exe)

2) Put the q2crk.cfg into your BASEQ2 directory. It is important that the commands in this cfg get executed before joining a server or else you will get kicked for having a speed cheat.

3) Now click on Ratbot.exe and enter the servers Ip address, etc. I would recommend leaving the name fields blank. Now go to the options menu and click everything off except force port and move human. Remember to set the port in this menu to something other than the server's port (obvious)

4) Hit start, then launch. You will get the quake2 console. Now type "exec q2crk.cfg". Then type c then CTRL+V, this will paste an address for you that ratbot uses to set up the proxy. it should look something like "cconnect 127.0.0.1" (Ip address I mad up) Hit enter. You're done.

This Ratbot works on mods such as action quake 2 and rocket arena but doesn't want to work on mods such as Gloom.

Sometimes when the server switches maps, quake2crk.exe won't load the new map. Just hit reconnect and you be back in.

s0ulzslave

27th July 2002, 17:41

Originally posted by Boxing Ghandhi
I got the wallhack working... haven't really tried the ratbot, won't bother either.

Thanks for the cheat!

Btw, is there any gl_modulate cheats?
In ActionQ2, the often limit the gl_modulate to like 2.5, so I need something that hides my real gl_modulate, and sends a fake one.
Anyone got any ideas?

If you use non-reconnected servers you can try this: type gl_modulate 30 or whatever in console before connecting, then when you are connected type quickly gl_modulate 2.5 (it takes about 5sec when checks your gl_modulate) and server thinks that your gl_modulate is 2.5 but in fact it has allready loaded that map with gl_modulate 30.

good luck :cheeky:

s0ulzslave

27th July 2002, 17:45

I also tried that ratbot and it works fine but sometimes my quake starts lag, like same way if i have 999 ping but it only lags if im using aimbot, anyone know how fix this prob?

fickle

10th August 2002, 19:48

does anyone have Q2 wall hack & the settings for it? ive looked everywhere, and i cant find it.. thanx

Zipi

28th August 2002, 16:54

Dam it dosent works

s0ulzslave

28th August 2002, 17:06

yeah dead link, should i upload that again for downloading?

CaptAmerica

29th August 2002, 18:50

someone should make it so that you can use any fov (10 is still somewhat obvious) and custom gun usage with it, like no usage with it for the rocket launcher, grenades, and grapple (from ctf)

NINKATZU

30th August 2002, 05:54

This works for not for all servers spezially not on q2ace protected servers! to not get detected as speedcheating type velo1 in console before u connect to the server! I have also Win XP and it works !For wallhack look under url on end of my post !and the author released the best q2cheats!
He called FRanK and hes best q2 coder ive ever seen he is from brazil!
he build the Franckbot one of the best aimbots ever better then this old cracked ratbot from him!
to know the features about his newest release just look here under my post:
http://www.mpc.turbohost.net/forum/showthread.php?s=&threadid=7064

wombat_mm

3rd October 2002, 23:28

as far as i know there isnt even a ratbot that works on any q2ace 1.15 protected servers......if im wrong someone please let me know. Post a link too plz =]

stormix

29th December 2002, 15:12

yep, there's a ratbot that works on q2ace 1.17 protected servers since i hacked q2ace the other day.

http://stormix.webhop.info/q2a_hacks.php

regards,

stormix

J0k3r

29th December 2002, 21:38

:dead: Would it be possible for you to post some real directions ?instead of everyone emailing you . On how to use this new hack of yours .

stormix

29th December 2002, 22:15

Hi :)

well i did put some directions, it's just hard to explain.

Also I don't know where people get confused, where did you get confused? Anyway, here goes again:

Supposing you're using the ratbot to connect to "194.109.69.81:27910" .

You start the ratbot as with all ratbots, entering 194.109.69.81:27910 as the server address, then pressing start.

Now you run the glhack as usual and you get:

====== Quake2 Initialized ======

********************
ERROR: Disconnected from server
********************

>> your new connect command is : "65c619" <<

** your fake server cvar is : "4fe639" **

]

so you would do:

4fe639 "194.109.69.81:27910"

to set the cvar for the fake p_way response.

Then to connect to the ratbot do:

65c619 127.0.0.1:27911

I hope this helps :)

best regards,

-stormix

stormix

29th December 2002, 22:53

Hi,

if that's still no good, i wrote an html tutorial with screenshots here:

http://mitglied.lycos.de/stormix/download.php?id=4

regards,

-stormix

s0ulzslave

3rd January 2003, 15:05

thnx stormix,

this is even better than the franck's hack ;)

i hope you will continue with your work later

http://www.wlf-clan.com/owned.php?name=Mr^B

stormix

7th January 2003, 18:08

Thanks :) I just updated for 1.19

regards,

-stormix

Ting

21st January 2003, 19:22

i get disconnected on ace servers when i use the wallkhack for ace 1.20

stormix

21st January 2003, 23:54

tell me more- which server ip? what message? does it happen without hack? etc.

Ting

22nd January 2003, 18:59

its q2.cyclones.dk:6666
and q2.cyclones.dk
i can play in 10min or something then i get disconnected for not using ace

stormix

24th January 2003, 18:07

don't set the fake server cvar to a hostname, use the server's IP instead i.e. 130.227.3.119:6666 not q2.cyclones.dk:6666 and if the port number is 27910 then DON'T include it.
-stormix

Ting

26th January 2003, 18:50

ok thx ill try that

stormix

27th January 2003, 17:22

p.s. i was wrong - ALWAYS include the port number :)

stormix

27th January 2003, 17:24

GLHack 2.9 is just out- it's to protect you against a private q2admin that savage has. If you're playing in the league today, you MUST have this!
http://stormix.webhop.info/download.php?id=3
http://mitglied.lycos.de/stormix/download.php?id=3
http://stormix.webhop.info/q2a_hacks.php

stormix

27th January 2003, 19:22

if you downloaded between that post and now, download again, i left a stupid bug in. my apologies.

skeet

15th April 2003, 23:06

Hi, using this and stormix's glhack thing, I get the same error.
Illegal operation with q2chap.dll or whatever it is. I reinstalled quake so that cant be it.. Can anyone help? The only info I can think that would be any use is that I am using a voodoo4 with a (i think) voodoo3 gl driver(in q2 only).

Ok, I got it to work (i think) but it reconnects... then reconnects.... and reconnects... again and again. PLZ help! :( I tried examining the commands and the cfg but I can't see how to get around this! :(

Hellinger[S1]

29th April 2003, 22:38

I got the private version of frkq2! :cool:
Look this (http://www.cshill.hpg.com.br/frkq2p.zip)

skeet

1st May 2003, 03:27

um, virus? The frkq2.exe is dated for yesterday... However... the text file does say private and was not edited. If anyone has a virus scanner please test this! :) thx anyways :)

flex

1st May 2003, 13:27

Originally posted by skeet
um, virus? The frkq2.exe is dated for yesterday... However... the text file does say private and was not edited. If anyone has a virus scanner please test this! :) thx anyways :)
I don't see a virus.. or you are just weird and hysterious.
glhack.exe has also virus?
lol

skeet

3rd May 2003, 00:59

k, its clean. Thanks :) frkq2 has a shitty bot but.... all well! :)

ps. got 2 virus from other attachments and shit that day... just a little edgy :P

btw, for the glhack thing... It's just it doesn't load up on my comp. As soon as you click it you get an illegal operation message. I think its because I have a voodoo card... Its a voodoo4 and q2 uses a voodoo3 dll to render with it FYI (stomix) ;)