Darkages packet Warp codes

[GraveRose]

These are packet numbers for warping in darkages or maybe they were. This is not a .exe these are all in notepad so if you dont know what to do with them or how to use them i suggest reading up on packets. and then Wpe Pro or NetXRay =)


P.S use winrar to open this file (im sure everyone knows that and those who dont wont be able to even figure out how to use these probably but oh well)



Edit: WwW.darkages.com

[GandoN2004]

as long as it txt it looks safe from trojans and keyloggers :D nice work man :D

[GraveRose]

as long as it txt it looks safe from trojans and keyloggers :D nice work man :D


Thnx, Some of the warps like to the Ew fae may be off now but im going back through and ill be posting the newer warp points sooner or later :rambo:

[GandoN2004]

lol i dont actually play this game but i appreciate any hackers that publish their knowladge :D i see u have some good knowledge in packet editing ill pm u my email we could help eachother alot :D

[GraveRose]

i cant access my private msg's prolly due to a requirement on posts or something but if you feel like it you can email me Damien666beast@sbcglobal.net *woo long aint it? XD* And i love this f*cken game <3! and i know a bit which i learned from tutorials as much as i could =O and a bunch of trials and errors >.<

[GandoN2004]

lol yea me2... thats kinda out of subject lol but anyway i really need some help with the acrual editing and decoding of packets gonna send u email now
lol dont u have msn? or icq?

[xUnDeaDx]

These are packet numbers for warping in darkages or maybe they were. This is not a .exe these are all in notepad so if you dont know what to do with them or how to use them i suggest reading up on packets. and then Wpe Pro or NetXRay =)


P.S use winrar to open this file (im sure everyone knows that and those who dont wont be able to even figure out how to use these probably but oh well)



Edit: WwW.darkages.com


i played b4 usa version and singapore version.. there is a hack for u to get stats to learn skills ... keke.. its using wpe pro.. the ways of doing i don know.. but there is a way is a fact ^^

[GraveRose]

i played b4 usa version and singapore version.. there is a hack for u to get stats to learn skills ... keke.. its using wpe pro.. the ways of doing i don know.. but there is a way is a fact ^^

well i dont know about hacking stats but, you can example: if u wanted to learn blind snare have a friend record the packet then send the code to u then get the right socket value then just send it, atleast thats what i did and it let me learn it but i did it with Spring trap so i didnt have to have the daggers but after a day or so that account was banned oh well wasnt my main anyways XD



edit: i dont like msn and icq has too many numbers >.< >.< and i dont like aim and yahoo has too many booters xD so in otherwords i dont use messengers i got names on em all just wouldnt do ya no good couse i dont use them 0.o

[Doodlerz]

I know this doesnt really have anything to do with darkages... but its related. Do you know if its possible to packet edit nexustk because I tried and as soon as I sent edited packets it disconnected me
I heard wpepro(what I used) isnt that great but not really sure
Have you tried in nexustk?
Thanks alot

[GraveRose]

I know this doesnt really have anything to do with darkages... but its related. Do you know if its possible to packet edit nexustk because I tried and as soon as I sent edited packets it disconnected me
I heard wpepro(what I used) isnt that great but not really sure
Have you tried in nexustk?
Thanks alot


Well WPE PRO sucks very badly but if your using Windows XP then its not much of a choice with WPE's anyways, I have not tryed it on Nexustk and on darkages i get d/cs all the time when i was editing packets but it turned out i edited it wrong and well i guess thats why. Also you cannot send the same packet twice very quickly must wait a bit or you will d/c u cannot do it with picking up some items that arent there or d/c ect.. Some items can be picked up without being in there as long as you got in your inventory, or you can drop the item then edit the packet to be 2 instead of one send it, it should pick up the one item but you should have 2 items in the inventory =] . BUT i dont use wpe pro anymore couse it sux but if your new to packets START WITH IT. easiest i found to learn from.

also i use to play nexus LOOOOONG LOOOOONG LOOOOOONG LOOOOOONG time ago =P and i love darkages sooooooooooooooooooooooooooooooooooooooooooooooooo oooooooooooooooooooooooooooooooooooooooooooooooooo oooooooooooooooooooooooooooooooooooooooooooooooooo oooooooooooooooooooooooooooooooooooooooooooooooooo oooooooooooooooooooooooooooooooooooooooooooooooooo oooooooooo
much more. :laugh:

[Doodlerz]

Cool... it sounds alot like what happened in nexus when I tried it kept dcing me when nothing was under me. What I really wanted to do was edit packet so I can go into areas where lvl 1 isnt allowed and such but Im not really sure what value to change... and everytime I captured packets doing the same thing, they changed (that confused me) any suggestions?

[Etneri]

Im confused Can you like make a tuturial to do this? Cuz i cant figure it out, Cuz i love Darkages Have a druid,a gladiator, and weist..I just want to try on a noob char lol.

[Doodlerz]

Tutorial for Dark ages using WPE pro... just be careful you may get caught and get your account banned, although its very unlikely unless your stupid about it. (there may be easier ways to do it, but for now this is all I know, sorry)

Alright... if you are talking about using the codes he has supplied (well done btw) here you go(for using wpe pro, not sure of others although probably similar) wpe pro for xp wpe for 98(I think)

1. Download packet editor (wpe/pro/other)

2. Open up wpe pro.exe

3. Open up dark ages (and log in) and alt tab out then goto top left in wpe labelled "target program" and select dark ages.exe

4. After that you will need to capture a few packets, first click on "detail" beside "gauge" on the left side of the editor(dont nessesarily need to do this just makes it easier) AFTER you have done that click on the play button above the detail screen and it should say "recv 0" at first, but you will start seeing the number go up, after you press play "recv 1..etc". Click the stop button after you have seen the number go up a few.

5. A window will show up where it used to be gray, it should have all sorts of numbers and characters (oh and by the way, you can tell wether it was sent or recieved under function it says recv and says send, so those packets were eithersent or recieved) right click on one of them and click send, then look at the middle bottom of the new window and it says "open socket ID 901" copy or write down that number for use later.

6. You will see at the top right (below the text box) of that window it says packet size, so change the value to how many things there are like... it will display "0000000 AA 00 33 44 55 6D ......" you would change packet size there to 6 (start from AA and end at 6D).

7. Pick a packet to send from his examples (if you havent already downloaded it, download it and extract it), This is takin right off of his dugons.txt "AA 00 0B 3F 11 5F 74 7D 1D 7F 59 7F 76 3F", so change the packet size to 14 and it will show "AA 00 00 00..." change the letter or number of the packet by left clicking on the letter or numbers. For the third one where it says "0B" left click on the second 0 and change the value from "0" to "B" so it should display "0B", do this for the rest of them and make it all the same as shown in the txt file.

8. AFTER you made all the values correct you can FINALLY send by pressing the play button. It should at the bottom right corner below "sent" have packet number and packet errors, the packet number goes up when it was sent, packet error goes up when it did not work and you will have to repeat 4,5 to get socket ID.

9. Note... If you get disconnected or quit and try later, you will have to follow steps 4 and 5 and copy the socket ID number.

10. It is possible to make the values go up automatically but in dark ages it tends not to let you and will disconnect you if you send packets continuously (3 or more)

...I hope this helps

[GraveRose]

Tutorial for Dark ages using WPE pro... just be careful you may get caught and get your account banned, although its very unlikely unless your stupid about it. (there may be easier ways to do it, but for now this is all I know, sorry)

Alright... if you are talking about using the codes he has supplied (well done btw) here you go(for using wpe pro, not sure of others although probably similar) wpe pro for xp wpe for 98(I think)

1. Download packet editor (wpe/pro/other)

2. Open up wpe pro.exe

3. Open up dark ages (and log in) and alt tab out then goto top left in wpe labelled "target program" and select dark ages.exe

4. After that you will need to capture a few packets, first click on "detail" beside "gauge" on the left side of the editor(dont nessesarily need to do this just makes it easier) AFTER you have done that click on the play button above the detail screen and it should say "recv 0" at first, but you will start seeing the number go up, after you press play "recv 1..etc". Click the stop button after you have seen the number go up a few.

5. A window will show up where it used to be gray, it should have all sorts of numbers and characters (oh and by the way, you can tell wether it was sent or recieved under function it says recv and says send, so those packets were eithersent or recieved) right click on one of them and click send, then look at the middle bottom of the new window and it says "open socket ID 901" copy or write down that number for use later.

6. You will see at the top right (below the text box) of that window it says packet size, so change the value to how many things there are like... it will display "0000000 AA 00 33 44 55 6D ......" you would change packet size there to 6 (start from AA and end at 6D).

7. Pick a packet to send from his examples (if you havent already downloaded it, download it and extract it), This is takin right off of his dugons.txt "AA 00 0B 3F 11 5F 74 7D 1D 7F 59 7F 76 3F", so change the packet size to 14 and it will show "AA 00 00 00..." change the letter or number of the packet by left clicking on the letter or numbers. For the third one where it says "0B" left click on the second 0 and change the value from "0" to "B" so it should display "0B", do this for the rest of them and make it all the same as shown in the txt file.

8. AFTER you made all the values correct you can FINALLY send by pressing the play button. It should at the bottom right corner below "sent" have packet number and packet errors, the packet number goes up when it was sent, packet error goes up when it did not work and you will have to repeat 4,5 to get socket ID.

9. Note... If you get disconnected or quit and try later, you will have to follow steps 4 and 5 and copy the socket ID number.

10. It is possible to make the values go up automatically but in dark ages it tends not to let you and will disconnect you if you send packets continuously (3 or more)

...I hope this helps


Nice tut =) good for basics of useing WPE in da, ill post a tutorial on Packet editing and ill also write another txt file for all the area's and what to edit to raise/lower but will take a few days to write, and if it turns out to help a bit ill post a more advanced one later on during the week or next

[mudslap]

i start recording, assail, stop play. then i change packet size and add in all the numbers/letters to change. after that, it doesnt work unless i put us send list with this socket id, so i did it said 1 send and it didnt teleport me.

[hahahoho]

not working man how come

[Fry514]

Read the first post he says "use winrar to open this file (im sure everyone knows that and those who dont wont be able to even figure out how to use these probably but oh well)"