Recently I've seen many people asking for the settings on the Cheat Engines. Many useless threads have been made asking for the settings of different types of Engines.
I plan to stop these useless threads by posting all the settings of engines that I currently know and that work for the new Rev.
Please feel free to post constructive criticism.
No Flaming Please.
I would like to note, that Kasper has told me all his UCE settings are the same as all of his other settings. Please do not ask for it here. As I have only posted one, all of them should be the same as that.
Here I go. Last Updated March 9, 2007
(Table of Contents)
1) XP Engine
2) Akuma Engine
3) Cheetah Engine
4) Ba Gay Engine 0.7
5) Spuce Engine
6) Serum Engine
7) ShadowXMachine Engine
8) Black Joseph Engine
9) Spuce 3 Engine
10) Kaspersky Engine 3.2
11) SPUC3NGINE 3.0
~_~_~_~_~_~_~_~_~_ These are all the Cheat Engines I know that currently work.
1) XP Engine Settings
Code:General Settings: Tick Everything except Address list specific Scan Settings: [ ] Fast scan on by default [x] Enable hyperscan when possible [ ] Don't scan memory that is protected with the No Cache Option [ ] Keep low memory usage when doing an "Unknown Initial Value scan" with Hyper Scan [x] MEM_PRIVATE [x] MEM_IMAGE [ ] MEM_MAPPED [X] Run scan in seperate thread. File Associations: Tick Nothing Code Finder: [x] Use Debug Registers [ ] Memory Access Exceptions [x] Try to prevent detection of the debugger [ ] Handle breakpoints not caused by CE Assembler: [x] Show disassembler [x] Show debugger options [x] Use hardware breakpoints [ ] Use int3 instructions for breakpoints [x] Replace incomplete opcodes with nops [x] Ask for replace with nop [x] Try to prevent detection of the debugger Extra: [ ] Query memory region routines [x] Read/Write process memory [x] Open Process [ ] Use APC to inject dll's [ ] Use APC to create new threads [ ] Undo changes to CE [ ] Force memory to be writable in case the standard method is blocked [x] Enable use of Process Watcher [x] Use kernel debugger options when possible [ ] Stealth mode (Usermode) [ ] Stealth mode (Kernelmode)
Enjoy!
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2) Akuma Engine Settings
Akuma Engine Settings:
Enjoy!Code:General Settings: Tick Everything Update Interval:500 Found Address List:1000 Freeze Interval:1 Scan Settings: [X] Fast scan on by default [ ] Enable hyperscan when possible [ ] Don't scan memory that is protected with the No Cache Option [ ] Keep low memory usage when doing an "Unknown Initial Value scan" with Hyper Scan [x] MEM_PRIVATE [x] MEM_IMAGE [ ] MEM_MAPPED [X] Run scan in seperate thread. Thread Priority:HIGHER File Associations: Tick Nothing Code Finder: [x] Use Debug Registers [ ] Memory Access Exceptions [x]Try to prevent detection of the debugger [ ] Handle breakpoints not caused by CE Assembler: [x] Show disassembler [x] Show debugger options [x] Use hardware breakpoints [ ] Use int3 instructions for breakpoints [x] Replace incomplete opcodes with nops [x] Ask for replace with nop [x] Try to prevent detection of the debugger Extra: [ ] Query memory region routines [x] Read/Write process memory [x] Open Process [ ] Use APC to inject dll's [ ] Use APC to create new threads [ ] Undo changes to CE [ ] Force memory to be writable in case the standard method is blocked [x] Enable use of Process Watcher [x] Use kernel debugger options when possible [ ] Stealth mode (Usermode) [X] Stealth mode (Kernelmode)
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
3) Cheetah Engine
Enjoy!Code:General Settings: Tick Everything except Address list specific Scan Settings: [ ] Fast scan on by default [x] Enable hyperscan when possible [ ] Don't scan memory that is protected with the No Cache Option [ ] Keep low memory usage when doing an "Unknown Initial Value scan" with Hyper Scan [x] MEM_PRIVATE [x] MEM_IMAGE [ ] MEM_MAPPED [X] Run scan in seperate thread. File Associations: Tick Nothing Code Finder: [x] Use Debug Registers [ ] Memory Access Exceptions [x] Try to prevent detection of the debugger [ ] Handle breakpoints not caused by CE Assembler: [x] Show disassembler [x] Show debugger options [x] Use hardware breakpoints [ ] Use int3 instructions for breakpoints [x] Replace incomplete opcodes with nops [x] Ask for replace with nop [x] Try to prevent detection of the debugger Extra: [ ] Query memory region routines [x] Read/Write process memory [x] Open Process [ ] Use APC to inject dll's [ ] Use APC to create new threads [ ] Undo changes to CE [ ] Force memory to be writable in case the standard method is blocked [x] Enable use of Process Watcher [x] Use kernel debugger options when possible [ ] Stealth mode (Usermode) [ ] Stealth mode (Kernelmode)
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
4) Ba Gay Engine 0.7
Code:General Settings: Tick Everything except Address list specific Scan Settings: [ ] Fast scan on by default [x] Enable hyperscan when possible [ ] Don't scan memory that is protected with the No Cache Option [ ] Keep low memory usage when doing an "Unknown Initial Value scan" with Hyper Scan [x] MEM_PRIVATE [x] MEM_IMAGE [ ] MEM_MAPPED [X] Run scan in seperate thread. File Associations: Tick Nothing Code Finder: [x] Use Debug Registers [ ] Memory Access Exceptions [x] Try to prevent detection of the debugger [ ] Handle breakpoints not caused by CE Assembler: [x] Show disassembler [x] Show debugger options [x] Use hardware breakpoints [ ] Use int3 instructions for breakpoints [x] Replace incomplete opcodes with nops [x] Ask for replace with nop [x] Try to prevent detection of the debugger Extra: [ ] Query memory region routines [x] Read/Write process memory [x] Open Process [ ] Use APC to inject dll's [ ] Use APC to create new threads [ ] Undo changes to CE [ ] Force memory to be writable in case the standard method is blocked [x] Enable use of Process Watcher [x] Use kernel debugger options when possible [ ] Stealth mode (Usermode) [ ] Stealth mode (Kernelmode)
Enjoy!
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
5) Spuce Engine
Spuce Engine Settings
Code:[General Settings]: - Show undo Button - Show advanced options - Update the list of found adresses even after scanning. - Center spuce Engine when bringing to front. - Hide some/all windows instead of trying to bring spuce Engine front. - Show values as if they are signed. [Scan Settings]: - Enable Hyperscan when possible - MEM_Private - MEM_Image - Run Scan In Separate Thread [File Associations]: Nothing [Plugins]: Nothing [Code Finder]: - Use Debug Registers (aka Hardware Breakpoints) - Try to prevent detection of the debugger [Assambler]: - Show disassembler. - Show debugger options. - Use Hardware Breakpoints (Max 3). - Replace incomplete opcodes with nops. - Ask for replace with nop. - Try to prevent detection of the debugger. [Extra]: - Query memory region routines. - Read/Write Process Memory. - Open Process. - Enable use of the Process Watcher. - Use kernelmode debugger options when possible. - Stealth Mode (KernelMode) Click -> "More" -> Check ->Prevent all modules from getting loaded except.
Enjoy!
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
6) Serum Engine
Serum Engine Settings
Code:General Settings: Tick Everything except Address list specific Scan Settings: [ ] Fast scan on by default [x] Enable hyperscan when possible [ ] Don't scan memory that is protected with the No Cache Option [ ] Keep low memory usage when doing an "Unknown Initial Value scan" with Hyper Scan [x] MEM_PRIVATE [x] MEM_IMAGE [ ] MEM_MAPPED [X] Run scan in seperate thread. File Associations: Tick Nothing Code Finder: [x] Use Debug Registers [ ] Memory Access Exceptions [x] Try to prevent detection of the debugger [ ] Handle breakpoints not caused by CE Assembler: [x] Show disassembler [x] Show debugger options [x] Use hardware breakpoints [ ] Use int3 instructions for breakpoints [x] Replace incomplete opcodes with nops [x] Ask for replace with nop [x] Try to prevent detection of the debugger Extra: [x] Query memory region routines [x] Read/Write process memory [x] Open Process [ ] Use APC to inject dll's [ ] Use APC to create new threads [ ] Undo changes to CE [ ] Force memory to be writable in case the standard method is blocked [x] Enable use of Process Watcher [x] Use kernel debugger options when possible [ ] Stealth mode (Usermode) [ ] Stealth mode (Kernelmode)
Enjoy!
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
7) ShadowXMachine Engine
Code:General Settings: Tick Everything except Address list specific Scan Settings: [ ] Fast scan on by default [x] Enable hyperscan when possible [ ] Don't scan memory that is protected with the No Cache Option [ ] Keep low memory usage when doing an "Unknown Initial Value scan" with Hyper Scan [x] MEM_PRIVATE [x] MEM_IMAGE [ ] MEM_MAPPED [X] Run scan in seperate thread. File Associations: Tick Nothing Code Finder: [x] Use Debug Registers [ ] Memory Access Exceptions [x] Try to prevent detection of the debugger [ ] Handle breakpoints not caused by CE Assembler: [x] Show disassembler [x] Show debugger options [x] Use hardware breakpoints [ ] Use int3 instructions for breakpoints [x] Replace incomplete opcodes with nops [x] Ask for replace with nop [x] Try to prevent detection of the debugger Extra: [ ] Query memory region routines [x] Read/Write process memory [x] Open Process [ ] Use APC to inject dll's [ ] Use APC to create new threads [ ] Undo changes to CE [ ] Force memory to be writable in case the standard method is blocked [x] Enable use of Process Watcher [x] Use kernel debugger options when possible [ ] Stealth mode (Usermode) [X] Stealth mode (Kernelmode)
Enjoy!
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
8) Black Joseph Engine
Code:General Settings: [X]show undo button [X]show advanced options [X]update the list of found adresses even after scanning [X]center BlackJoseph engine when bringing to front [X]hide some/all windows insted of trying to bring Black Joseph engine Scan Settings: [X]enable hyperscan when possible [X]mem_private:memory that is private [X]mem_private: memory that is mapped into view of an image secion Code Finder [X]use debug registers(aka hardware brekponts) [X]try to prevent detection of the debugger assembler: [X]show diassebler [X]show debugger options [X]use hardware breakpoints (max 3) [X]replace incomplete opcodes with nops [X]ask for replace with nop [X]try to prevent detection of the debugger Extra: [X]Read/Write Process Memory [X]Use Kernel debugger optionrs when possible stealth mode(kernelmode) click more then click the one that says prevent
Enjoy!
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
9) Spuce 3 Engine
Code:[General Settings]: - Show undo Button - Show advanced options - Update the list of found adresses even after scanning. - Center spuce Engine when bringing to front. - Hide some/all windows instead of trying to bring spuce Engine front. - Show values as if they are signed. [Scan Settings]: - Enable Hyperscan when possible - MEM_Private - MEM_Image - Run Scan In Separate Thread [File Associations]: Nothing [Plugins]: Nothing [Code Finder]: - Use Debug Registers (aka Hardware Breakpoints) - Try to prevent detection of the debugger [Assambler]: - Show disassembler. - Show debugger options. - Use Hardware Breakpoints (Max 3). - Replace incomplete opcodes with nops. - Ask for replace with nop. - Try to prevent detection of the debugger. [Extra]: - Query memory region routines. - Read/Write Process Memory. - Open Process. - Enable use of the Process Watcher. - Use kernelmode debugger options when possible. - Stealth Mode (KernelMode) Click -> "More" -> Check ->Prevent all modules from getting loaded except.
Enjoy!
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
10) Kaspersky Engine 3.2
Code:General Settings: Tick Everything except Address list specific Scan Settings: [ ] Fast scan on by default [x] Enable hyperscan when possible [ ] Don't scan memory that is protected with the No Cache Option [ ] Keep low memory usage when doing an "Unknown Initial Value scan" with Hyper Scan [x] MEM_PRIVATE [x] MEM_IMAGE [ ] MEM_MAPPED [X] Run scan in seperate thread. File Associations: Tick Nothing Code Finder: [x] Use Debug Registers [ ] Memory Access Exceptions [x] Try to prevent detection of the debugger [ ] Handle breakpoints not caused by CE Assembler: [x] Show disassembler [x] Show debugger options [x] Use hardware breakpoints [ ] Use int3 instructions for breakpoints [x] Replace incomplete opcodes with nops [x] Ask for replace with nop [x] Try to prevent detection of the debugger Extra: [ ] Query memory region routines [x] Read/Write process memory [x] Open Process [ ] Use APC to inject dll's [ ] Use APC to create new threads [ ] Undo changes to CE [ ] Force memory to be writable in case the standard method is blocked [x] Enable use of Process Watcher [x] Use kernel debugger options when possible [ ] Stealth mode (Usermode) [ ] Stealth mode (Kernelmode) ALTERNATE EXTRA SETTINGS [x] Query memory region routines [x] Read/Write process memory [x] Open Process [ ] Use APC to inject dll's [ ] Use APC to create new threads [ ] Undo changes to CE [ ] Force memory to be writable in case the standard method is blocked [x] Enable use of Process Watcher [x] Use kernel debugger options when possible [ ] Stealth mode (Usermode) [x] Stealth mode (Kernelmode) > Prevent all modules.
Enjoy!
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
11) SPUC3NGINE 3.0
___________________Code:[General Settings]: - Show undo Button - Show advanced options - Update the list of found adresses even after scanning. - Center spuce Engine when bringing to front. - Hide some/all windows instead of trying to bring spuce Engine front. - Show values as if they are signed. [Scan Settings]: - Enable Hyperscan when possible - MEM_Private - MEM_Image - Run Scan In Separate Thread [File Associations]: Nothing [Plugins]: Nothing [Code Finder]: - Use Debug Registers (aka Hardware Breakpoints) - Try to prevent detection of the debugger [Assambler]: - Show disassembler. - Show debugger options. - Use Hardware Breakpoints (Max 3). - Replace incomplete opcodes with nops. - Ask for replace with nop. - Try to prevent detection of the debugger. [Extra]: - Query memory region routines. - Read/Write Process Memory. - Open Process. - Enable use of the Process Watcher. - Use kernelmode debugger options when possible. - Stealth Mode (KernelMode) Click -> "More" -> Check ->Prevent all modules from getting loaded except.
Credits of the settings go to the rightful Creator of the Engine.
~~~
These are the settings for the Engines that I know of and currently work. I think there are more working Engines out there but I can't recall some of those.
Good Luck with the settings.
Happy Hacking
~Benihime Last Updated March 9, 2007
Updates:
Added
______________________________________
Originally Posted by Benihime
Bookmarks