[Release] ObjColorbot

[kolbybrooks]

: Post updated with latest latest - Thursday, Nov 20 2008 / 7:25pm PST.

You'll need .Net 3.5 which you can get at : http://www.microsoft.com/downloads/d...displaylang=en

Download link to the recommended color models : http://www.mpcforum.com/attachment.p...4&d=1227153390

Video of the hack in action : http://www.youtube.com/watch?v=ycpSRsomj4Q

ObjColorbot - v1.1
------------------
  A - Requirements
  B - Setup
  c - Controls
  D - Debugging
  E - Credits
  F - Extras
------------------,

	Section A: Requirements
		1: .Net 3.5 : http://www.microsoft.com/downloads/details.aspx?FamilyId=333325FD-AE52-4E35-B531-508D977D32A6&displaylang=en
                2: Colored models - Red / Blue : http://www.mpcforum.com/attachment.php?attachmentid=27544&d=1227153390 ( Requires an MPCForum account )

		Recommended system:
		   CPU - 1.7 GHz +
		   GPU - Geforce 6600 equivilent or greater.
		   RAM - DDR400 1.5Gb +

	Section B: Setup
		1: Start ObjColorbot.
		2: Things to know about ObjColorbot:

		   - Speed slider : The slider in the "Speed" group box controls "Tick Rate". This is used to prevent massive use of CPU when scanning in Aim Mode.
		     : Adjust this accordingly to your CPU. Fast can drop 20-60 FPS on a mid gaming machine.

		   - Auto shoot / Precisee Aiming : Autoshoot is self-explanatory. It shoots when aimed on a target. Precise Aiming though only shoots when actually on a target.
		     : With Precisee Aiming disabled, the bot attempts to aim and fire upon the target immediately after aiming. Even if it's not fully targeted.
		       This though may tend to cause mis-fires with higher FPS drop, you could attempt to change your Speed slider to compensate this. NOTE: Look at Section D : Debugging # 1.
		     
		     OPTION "Only for the first shot" : This enables the Precise aiming only to be enabled for the first shot. 
		     : This cycles 1 second after aiming or when aiming mode is disabled.
		     : Use this for settings when using Rifles such as the Ak47 in Counter-Strike, where only the first shot lands where aimed.

		   - Teams : Blues aims at blue, Red at red, and Both at both teams.

		   - Settings :
			Width : The scan width for the bot.
			Height : The scan height for the bot.
			Seperation : How far apart the bot skips (in pixels) when scanning. 1 = Pixel by Pixel scan, 2 = 2x2 pixel scan.
			: The lower your seperation, the longer it will take to complete scanning. But too far and the bot may not pick up an enemy.
			: If you have an odd Width / Height and an even Seperation, 1 pixel will be skipped over and not scanned. It is recommended you
			  use like terms with Width / Height and Seperation.
			: It is recommended that you use a like term for scan areas; Like the default 4:3 ratio, 60p x 45p - 3seperation. 60 / 3 = 20, 45 / 3 = 15.

		3: Once you have determined your liked settings, hop in game and play!

	Section C: Controls
		- Scan mode : Enabled by mouse key.
		A selection for this can changed with the new "MM - M4 - M5" slider. MM being Middle mouse, M4 being Mouse4 and M5 being Mouse5.

	Section D: Debugging
		1: It is now recommended that you turn the Speed setting down until you see a "2" for the program title. The program only titles to "2" when locked and in shooting mode.
		   : This may not effect Faster computers, which in best case should use the fastest setting.
		   - Turn down your Speed slider, This allows for the program to best aim up to an enemy when scanning. Best used without Precise aiming.
		2: The title reads as this format, Color [Known Color / A, R, G, B]
		3: If ObjColorbot will not start.
		   - Make sure your system meets the requirements.

	Section E: Credits
		Microsoft corporation : Visual Studio products & .Net
		kolbybrooks of MPC, su1cidity of MMOwned : ObjColorbot
		Visual studio resource websites.
		MPCforum.com
		MMOwned.com

	Section F: Extras
		ObjColor Video : http://www.youtube.com/watch?v=ycpSRsomj4Q

---
I recommend these in-game settings as well as the colorbot settings for mid-high range systems.

cl_minmodels 1
cl_min_ct 1
cl_min_t 1
cl_ragdoll_physics_enable 0

ObjColorbot:
Speed: Fastest setting
x Autoshoot
x Precise aiming
x Only for the first Shot
x Controlled Fire Rate
Width: 60
Height: 45
Seperation: 3
---

Try it out, and 1 last thing to people who don't read the manuals. Middle mouse is to enable scanning for the bot.

Thanks, kolbybrooks.

[belink]

Appears clean, use at your own risk.

Thanks for the release.

[kolbybrooks]

Thanks Belink . I'll Update the post with updates and source when I get around to cleaning up and adding some ideas.

[CampStaff]

wow.. the readme is a fricking instructional beast book
umm.. gj kolby?

[kolbybrooks]

More is to come, just doing some dirty work and cleaning up. Thanks though , I'm trying to make a quality release.

[art2005]

CAN you please paste some screenshots , cause i still dont really understand whats hack for and what it is doing ??? and if its material hack or not ((( thx man

[sLaYeR-eS-Me]

Originally Posted by art2005

CAN you please paste some screenshots , cause i still dont really understand whats hack for and what it is doing ??? and if its material hack or not ((( thx man

it is a color aimbot, meaning it will try to find the colors of blue or red and then aim at them. he has supplied you models and the aimbot.

works quite well, my demo with it against bots attached. just put in cstrike and then open the console and type playdemo mpcColorBot

[kolbybrooks]

Took the time to post the video I made today, link is also supplied in first post. I'll also be updating the first post with the updated bot soon after this post.

I did not shoot once while filming the clips for this video, just general aiming.

http://www.youtube.com/watch?v=ycpSRsomj4Q

: First post updated with the new release. It has quite a bit of new features and has had a cleanup of code to run a little faster. Updated Manual with the post.

[art2005]

can you be banned for using this, or it is comepletly safe like material hacks ????

and will it work on sv_pure 2 servers ???

[bonesownss]

Really nice bot kolby. Actually works for vista!

Could do with a circle to show where the aiming box is or something, but other than that 10/10

[kolbybrooks]

@ Art - Yes, it's 100% safe on Vac servers. No it's wouldn't work on sv_pure servers without a Bypasser, because the bot is a colorbot and requires Colored models

@ Bones - That option is coming in following releases so look out for it .

[6969willwill]

thx mate, ill test soonish! i love colour aimbots coz im scared of a VAC ban.

[art2005]

where can i get working and safe sv_pure bypass without getting banned ????

[kolbybrooks]

sv_pure bypasses are not safe. I have yet to find one that is 100% safe.

[art2005]

so what are they, and where can i download save bypases ??? to pass sv_pure 2 security ?? or actually one more question, im admin on the server, can only me be using changes materials and pure wallhacks, maybe i need to right a command or something on the server so only i would be able to use material wallhacks ? if yes how can i do it???? thx...