Maple Hacks

SunBeam · 22nd December 2005, 20:24

** This thread is dedicated to these 3 clients of MapleStory : MapleGlobal, MapleSea, MapleJapan **

Posted all the hacks I can do, and can afford to post

[there's more than this, but these are the most used]. Also don't ask for a bypass [not even in PMs], ok ? That will be ignored...

Also, I won't be updating this [too much inactivity], so make sure you take the necessary precautions as to backup code or w/e in pictures, so that you can do this for later versions...

** For all MapleStory clients, the same drill : use the kernel debugger [normal breakpoints are being hooked and you will get DC]

SunBeam, out...

MapleGlobal v0.14
-------------------

1. God Mode :

- this is only for monsters that don't use magic/throw weapons; people notified me about getting hit by bananas or w/e...

In CE, make sure you target MapleStory.exe, then open up Memory view and go to : 596D80 [in the top part of MV, the code one]. Once here, right-click the instruction and choose "Change register at this address". In the pop-up that appears, tick the ZF one time. D0ne !

2. Character Coordinates :

In CE, click "Add address manually" :

* tick "Pointer"
* in the "Address of pointer" field input : 68199C
* in the "Offset(Hex)" field input : 234

And label it "X Coordinate". Repeat the same process for the "Y Coordinate", only this time input offset will be 238. D0ne!

3. Wall VAC :

Same drill as above :

* "Address of pointer" : 6810A0
* left wall offset : 4
* right wall offset : C

Now since you have the player coordinates, simply change both left and right wall addresses to the X Coordinate's value. Clean up the map, then watch how all the monsters warp to your current X position...

MapleSea v0.21
-----------------

1. God Mode :

* same drill as for MapleGlobal
* address to go to in Memory view : 5D163E

2. Character Coordinates :

Same drill :

* "Address of pointer" : 6CC888
* X coordinate offset: 564
* Y coordinate offset : 568

3. Wall VAC :

Same drill as above :

* "Address of pointer" : 6CBEF0
* left wall offset : 4
* right wall offset : C

MapleJapan v0.99
-------------------

1. God Mode :

* same drill as for MapleGlobal
* address to go to in Memory view : 5E2C97

- this one is for both Melee/Magic attack...

In CE, make sure you target MapleStory.exe, then open up Memory view and go to : 5E867D [in the top part of MV, the code one]. Once here, right-click the instruction and choose "Change register at this address". In the pop-up that appears, tick the ZF one time. D0ne ! [thanks for the heads-up, DupeEx]

2. Character Coordinates :

Same drill :

* "Address of pointer" : 6E12F4
* X coordinate offset: 320
* Y coordinate offset : 324

3. Wall VAC :

Same drill as above :

* "Address of pointer" : 6E0A30
* left wall offset : 4
* right wall offset : C

P.S. : All addresses/pointers are on 4 bytes...

Final words : my work here is d0ne; make backups of the code and have a merry X-Mass

!

sharr · 22nd December 2005, 21:36

weee

as for ever Great work

turbo-pascal · 22nd December 2005, 21:43

if you posting hacks you need to post bypass you know...

SunBeam · 22nd December 2005, 21:48

That's why I am posting them

Hope they add nProtect to Sea and Japan

...

xxvi3txbo1xx · 22nd December 2005, 22:20

so freeking hard to find bypass .but so easy to find hacks.....ty sunbeam anyways = 0

ViperRebel · 22nd December 2005, 23:09

Quote:

Originally Posted by SunBeam

Hope they add nProtect to Sea and Japan ...

JMS:
Doesnt even have a report function (i believe either kms or cms just got it though, so it may be migrating to jms)
Makes at least 50x as much money as OMS (everyone uses cash shop, everyone)
Doesnt complicate software for the user
Doesnt impede the users with anti-cheat that is strict (note: process guard isnt detected, and it has been out for how long? and they havent even added that to their detections, they wont block software with legitamite purposes)
Users get to ban hackers themselves using lie detector items

jms has never, and will never, get nProtect

halire · 23rd December 2005, 00:10

Quote:

Originally Posted by turbo-pascal

if you posting hacks you need to post bypass you know...

No he doesn't. Figure it out your self like most people do and stop leeching, you are lucky that he even posted what he did. Nprotect isn't as hard as most people would like to believe.

oefman · 23rd December 2005, 00:25

Hi Sunbeam nice work,
i got 1 question , wat ip's gameguard use for its update?

Rain · 23rd December 2005, 01:24

Quote:

Originally Posted by ViperRebel

JMS:
Doesnt even have a report function (i believe either kms or cms just got it though, so it may be migrating to jms)
Makes at least 50x as much money as OMS (everyone uses cash shop, everyone)
Doesnt complicate software for the user
Doesnt impede the users with anti-cheat that is strict (note: process guard isnt detected, and it has been out for how long? and they havent even added that to their detections, they wont block software with legitamite purposes)
Users get to ban hackers themselves using lie detector items

jms has never, and will never, get nProtect

thats a bold statement hope its true

newking · 23rd December 2005, 01:29

I heard about the lie detector item and It's probably usefull for people against hackers. :/

chimpinzo · 23rd December 2005, 01:53

God-Mode : 596D80 - use any bypassed CE with working kernel debugger and change ZF flag from 1 to 0 [tick ZF flag 1 time]

Character Coordinates : pointer - 68199C; X offset : +234; Y offset : +238

Wall VAC : pointer - 6810A0; left wall offset : +4; right wall offset : +C

how did you get those values? just wondering so i can know how they work,
character coordinates, same way as finding the X / Y vac i guesss.
wall vac, tracking a monster and using increasing/decreasing value, but how about godmode?

slslasher · 23rd December 2005, 02:20

tis god mode for maple sea is onli for body contact izit?coz when the mob use magical atk i was hit.

salvatore · 23rd December 2005, 02:27

lol sunbeam, the godmode wont work

its dc XD

Wall VAC : pointer - 6810A0; left wall offset : +4; right wall offset : +C

lol sunbeam, i found the value already it shows -173
wat do i have to change the value o_O
i put random value and it wont works lol

alcahest · 23rd December 2005, 03:48

LOL, the god more for MSEA works beautifully.
thou it works but actually im more interested in how u found the address. Isn't it more efficient if we can try to find it ourselves ??
I personally read thru sunbeam's tutorial and found jump hack and uber vac address, but still dun have any idea how to go about searching for god mode.
It will be much easier if someone could explain the logic behind finding god mode address.

alamakz · 23rd December 2005, 04:44

my maple closes when i attach the process to it. can any1 help me with this?

22nd December 2005, 20:24	#1
SunBeam Broken Shàdéh™ Apprentice God Join Date: 10th Jul 2004 Location: Romania Posts: 2,358	Maple Hacks This thread is dedicated to these 3 clients of MapleStory : MapleGlobal, MapleSea, MapleJapan Posted all the hacks I can do, and can afford to post [there's more than this, but these are the most used]. Also don't ask for a bypass [not even in PMs], ok ? That will be ignored... Also, I won't be updating this [too much inactivity], so make sure you take the necessary precautions as to backup code or w/e in pictures, so that you can do this for later versions... For all MapleStory clients, the same drill : use the kernel debugger [normal breakpoints are being hooked and you will get DC] SunBeam, out... MapleGlobal v0.14 ------------------- 1. God Mode : - this is only for monsters that don't use magic/throw weapons; people notified me about getting hit by bananas or w/e... In CE, make sure you target MapleStory.exe, then open up Memory view and go to : 596D80** [in the top part of MV, the code one]. Once here, right-click the instruction and choose "Change register at this address". In the pop-up that appears, tick the ZF one time. D0ne ! 2. Character Coordinates : In CE, click "Add address manually" : * tick "Pointer" * in the "Address of pointer" field input : 68199C * in the "Offset(Hex)" field input : 234 And label it "X Coordinate". Repeat the same process for the "Y Coordinate", only this time input offset will be 238. D0ne! 3. Wall VAC : Same drill as above : * "Address of pointer" : 6810A0 * left wall offset : 4 * right wall offset : C Now since you have the player coordinates, simply change both left and right wall addresses to the X Coordinate's value. Clean up the map, then watch how all the monsters warp to your current X position... MapleSea v0.21 ----------------- 1. God Mode : * same drill as for MapleGlobal * address to go to in Memory view : 5D163E 2. Character Coordinates : Same drill : * "Address of pointer" : 6CC888 * X coordinate offset: 564 * Y coordinate offset : 568 3. Wall VAC : Same drill as above : * "Address of pointer" : 6CBEF0 * left wall offset : 4 * right wall offset : C MapleJapan v0.99 ------------------- 1. God Mode : * same drill as for MapleGlobal * address to go to in Memory view : 5E2C97 - this one is for both Melee/Magic attack... In CE, make sure you target MapleStory.exe, then open up Memory view and go to : 5E867D [in the top part of MV, the code one]. Once here, right-click the instruction and choose "Change register at this address". In the pop-up that appears, tick the ZF one time. D0ne ! [thanks for the heads-up, DupeEx] 2. Character Coordinates : Same drill : * "Address of pointer" : 6E12F4 * X coordinate offset: 320 * Y coordinate offset : 324 3. Wall VAC : Same drill as above : * "Address of pointer" : 6E0A30 * left wall offset : 4 * right wall offset : C P.S. : All addresses/pointers are on 4 bytes... Final words : my work here is d0ne; make backups of the code and have a merry X-Mass ! __________________ People are all the same, we only get judged by what we do. Personality reflects name, and if I'm ugly, then so are you... Last edited by SunBeam; 26th December 2005 at 00:12.. Reason: -=[ Final release ]=-

22nd December 2005, 21:36	#2
sharr Apprentice Knight Join Date: 4th Oct 2005 Posts: 86	weee as for ever Great work __________________ ANNIHILATION

22nd December 2005, 21:48	#4
SunBeam Broken Shàdéh™ Apprentice God Join Date: 10th Jul 2004 Location: Romania Posts: 2,358	That's why I am posting them Hope they add nProtect to Sea and Japan ... __________________ People are all the same, we only get judged by what we do. Personality reflects name, and if I'm ugly, then so are you... Last edited by SunBeam; 22nd December 2005 at 21:53..

23rd December 2005, 02:27	#13
salvatore Dark Lord Join Date: 7th Dec 2005 Posts: 42	lol sunbeam, the godmode wont work its dc XD Wall VAC : pointer - 6810A0; left wall offset : +4; right wall offset : +C lol sunbeam, i found the value already it shows -173 wat do i have to change the value o_O i put random value and it wont works lol Last edited by salvatore; 23rd December 2005 at 02:34.. Reason: Automerged Doublepost

22nd December 2005, 21:43	#3
turbo-pascal Devil of Hell Join Date: 27th Sep 2005 Posts: 346	if you posting hacks you need to post bypass you know...

22nd December 2005, 22:20	#5
xxvi3txbo1xx Apprentice Knight Join Date: 8th Aug 2005 Posts: 80	so freeking hard to find bypass .but so easy to find hacks.....ty sunbeam anyways = 0

23rd December 2005, 00:25	#8
oefman MPC Member Join Date: 19th Jan 2005 Posts: 8	Hi Sunbeam nice work, i got 1 question , wat ip's gameguard use for its update?

23rd December 2005, 01:29	#10
newking Dark Lord Join Date: 22nd Dec 2005 Posts: 45	I heard about the lie detector item and It's probably usefull for people against hackers. :/

23rd December 2005, 01:53	#11
chimpinzo Dark Lord Join Date: 27th Dec 2004 Posts: 43	God-Mode : 596D80 - use any bypassed CE with working kernel debugger and change ZF flag from 1 to 0 [tick ZF flag 1 time] Character Coordinates : pointer - 68199C; X offset : +234; Y offset : +238 Wall VAC : pointer - 6810A0; left wall offset : +4; right wall offset : +C how did you get those values? just wondering so i can know how they work, character coordinates, same way as finding the X / Y vac i guesss. wall vac, tracking a monster and using increasing/decreasing value, but how about godmode?

23rd December 2005, 02:20	#12
slslasher Assassin Join Date: 15th Oct 2005 Posts: 151	tis god mode for maple sea is onli for body contact izit?coz when the mob use magical atk i was hit.

23rd December 2005, 03:48	#14
alcahest Lord Join Date: 17th Jul 2005 Posts: 30	LOL, the god more for MSEA works beautifully. thou it works but actually im more interested in how u found the address. Isn't it more efficient if we can try to find it ourselves ?? I personally read thru sunbeam's tutorial and found jump hack and uber vac address, but still dun have any idea how to go about searching for god mode. It will be much easier if someone could explain the logic behind finding god mode address.

23rd December 2005, 04:44	#15
alamakz Alamaking Dark Mage Join Date: 13th Nov 2005 Location: Hmm. gd question... where i live....... Posts: 25	my maple closes when i attach the process to it. can any1 help me with this?