ArtMoney Tutorial

~~CJAnime~~ · 21st April 2006, 23:50

Im Working On It. Once Its Done Ill Put IT Here.
Im Gonna Write It In Edit Mode And Keep Saving It So As I Write It. You Can Refresh The Page.

Sorry About Capitals For Each word =D Its My Trade Mark Kinda...

WORKING ON PICTURES!!!!

THIS DOES NOT NEED A BYPASS. USE THE NORMAL UPDATED VERSION OF GAMEGUARD.

ArtMoney Tutorial

Download ArtMoney Here --> http://www.artmoney.ru/e_download_se.htm

1.Install ArtMoney.

2.Open ArtMoney.

3.Go To Options.

4.Under The General Tab, Across From Show Processes, Use The Scroll Down Box And Click ALL.

Now Thats All You Have To Do Setting Wise.

5.Open Maple Story.

Important: For Those You Have Used The Old Bypass. Turn Off Prevx And Make Sure Your GameGuard Updates To The Newest Version. An Easy Way To Do This Is To Go To The nProtect Folder That You Put Those 3 Other Folders In And Just Delet Them. Or If You Want To Keep Them Then Just Rename A Folder. Example. GameGuard <---Rename Too---> ameGuard

IMPORTANT: PICTURES HERE FOR THE FOLLOWING -BEING UPLOADED-

6.Once The GameGuard Logo Comes Up Click The Select Process Scrool Down Bar. (Picture 1)

7. Go To The Bottom And You Should See this---> (Picture 2)

8. Select C:/...MapleStory.exe (Picture 2)

9. Now Your Locked On To Maple. (Picture 3)
So Let Maple Load Up. Log In. Go Somewhere Safe as Usually.

10.Press Alt+Tab

11. Go Back To ArtMoney.

--------------------------------------------------------------------------------

Time For.....Umm Lets See. Something Simply To Start With.

No Breath!!!!!!!

Step 1 - Rigth Click C:/...MapleStory.exe > Click Memory Editor (Picture 4)

Step 2 - Under The Section Moving. Click On The Scroll Down Box > Select Moving To Address (Picture 5)

Step 3 - Now Youll See Under That A Address Box Comes Up With 00010000 In It. (Picture 6)

Step 4 - Change That Address To 006C6174. (Picture 7)

Step 5 - Click The Long Button With The ^ On It. this Well Bring You To The Address. (Picture 7)

Step 6 - Now You'll See The Address Highligthed In Black. (Picture 7)

Step 7- Now Rigth Click The Address> Click Add To Table. (Picture 8)

Step 9 - Now Close The Memory Editor Window And Go Back To Mian Screen. You'll See This (Picture 9)

Step 10 - Click Integer 2 Bytes. A Box Shall Appear. (Picture 10)

Step 11 - Click The Arrow Down Button Next To Addess And Make It Pointer. (Picture 11)

Step 12 - Since the Offset for No Breath Is 230. Put That In The Box Next To The No Breath Address. (Picture 12)

Step 13 - Now Freeze It , Then Click OK. (Picture 13)

Note: If You Want to Change The Description to No Breath. Go Ahead.

Step 14 - Its Done. Go On Maple And Start Attacking. Then When You Stop, You Shoulding Be Breathing. You Should Be Standing Still. =D

[Im Gone to Bed. Iv Been At This For 12 Hours. Its Early In The Mourning Here. Im On Vacation As Well If You Didnt Know Ill Be Working On Vac Tut And God And Everything Else When I Get In The Mourning. Sorry. But Im sure Youll Have A LOT Of Questions And Compliants Tommorrow Posted Here. So Ill Try And Awnser Them As Soon As I Get Up. Im Really Sorry About This. Good Nigth. ]

~~CJAnime~~ · 22nd April 2006, 00:45

Im Going Ahead With Tutorial. Looks Like This Program Is All Over The Net. IV Been Getting A Lot Of Email About Memory View And Such So HIm Writing IT Agian

13370Mito · 22nd April 2006, 00:49

Quote:

Originally Posted by CJAnime

Im Going Ahead With Tutorial. Looks Like This Program Is All Over The Net. IV Been Getting A Lot Of Email About Memory View And Such So HIm Writing IT Agian

TY!! your work is greatly appreciated, cuz me, my bro ( who is a tech whiz ) and my good friend 1337BPM have been brainstorming for a while and nothing has come up... i mean, weve had valid working ideas, but nothing that we actually knew how to do, and then this rolls along and your helping us out... your a genius^_^

Pakikid · 22nd April 2006, 00:51

TY CJanime, it would be good to go forward with this tut because most of if not all of us except for you are stuck after opening the MapleStory.exe process.

~~CJAnime~~ · 22nd April 2006, 01:00

Quote:

Originally Posted by 13370Mito

just a reminder to those who cant read... he is adding it as he goes, and pretty much goin step by step to fully compile everything, so before u start flaming him with stuff like " WTF OMG!! I KNEW THAT ALREADY ROFL!!!! THIS SUXXORZ!! NOW WHAT?", just wait till he announces that he's finished ok?... im sure that once he is done, we will be worshipping him or something to that extent

Yes I AM Woking On It As You Guys Are Asking Questions. Sorry For Not Posting It Rigth When It Was DONE
I Though You Would At Least Knnow That I Was Working On It For You Guys. So I Posted This Thread And Now Am Working On It.

PICTURES TAKE A LOT OF TIME TOO

~~CJAnime~~ · 22nd April 2006, 01:44

I Just Got The Pics Up. the Ones In The Steps So Far. Now Im Writing Agian.

~~CJAnime~~ · 22nd April 2006, 02:11

Remember. Im Doing This For You Guys. I Already Made A Undetected Program Like Cheat Engine That Iv Been Using Since Ver .12

Im Just Trying To Help You Fellow Maple Story Hackers Or Whatever You Want To Call It.

~~CJAnime~~ · 22nd April 2006, 03:03

Thank You pika_gone_mad And bgnt (AKA The Guy In My Quote Who Got Banned)

The Vac Is SUPER HARDER. And LONG.

Yes You Can Do Unlimited Debuggers.

Yes You Can Add Your Own Pointers.

This Ill Show You all Tommorrow.

And How About This.

A VIDEO TUTORIAL!!!!!! I Can Make One. If You Guys Have Problems Getting It To Work And Having To Go Back And Forth To The Pictures.

=D

Nite.

godlyitems666 · 22nd April 2006, 03:48

thank you CJ

took me a while but i got the no breath to work.

cant wiat for vac

***gil*** · 22nd April 2006, 19:11

Great tutorial by CJAnime!

ArtMoney is a good program for editing memory values.
There is no question about that, and about the fact that it works.

This is approved by MPC and anyone who is gonna post against it will get permanently banned.

I've totally cleaned this thread and will not do it again.
I'll simply ban everyone who decides to spam here and prune all of his posts.

Follow the rules.

~~prodigyuwr~~ · 22nd April 2006, 19:12

has anyone actually gotten this to work...because I did it exactly how he said and it doesnt work for me

Sadsa · 22nd April 2006, 19:15

Hey CJ, thanks for giving this out to the public MPC even when you didn't need to, basically, you rule. :o

Prod read the posts, so far several people have gotten it to work.

XxChaotiK__SouL · 22nd April 2006, 19:16

Thank you CJ, this is a lot easier than making your own Undetected CE, for those of us who look at that tutorial and think " How the hell... " and I thank you.
About the Video tutorial. I think that is a great idea. A lot of people might find that to be quite a bit easier to follow.
Not that pictures are not easy to follow as well.
Great work, thanks a ton.

--- Edit ---
Problem, I have noticed some people are having the same problem as I am. No Breath does not work. I have redone the instructions 4 times now, and nothing.
Maybe I am missing something, but I was pretty sure I followed the steps quite closely. The only thing I was wondering about, do you have to move first, because I just logged in and ALT Tabbed out because of where I am.

alex5000 · 22nd April 2006, 19:25

i think u did great work ony posting here the tut!
but i hope u to post the values for god mode and more.
ty a lot!
(and i hope it to work for me too)

ZyforX · 22nd April 2006, 19:26

Maybe when CJAnime comes back, he can clarify some things for those of us who it will not work for. It seems some have had success, while others have failed.

21st April 2006, 23:50	#1
~~CJAnime~~ Banned by Admins Knight of Wars Join Date: 13th Apr 2006 Posts: 87	ArtMoney Tutorial Im Working On It. Once Its Done Ill Put IT Here. Im Gonna Write It In Edit Mode And Keep Saving It So As I Write It. You Can Refresh The Page. Sorry About Capitals For Each word =D Its My Trade Mark Kinda... WORKING ON PICTURES!!!! THIS DOES NOT NEED A BYPASS. USE THE NORMAL UPDATED VERSION OF GAMEGUARD. ArtMoney Tutorial Download ArtMoney Here --> http://www.artmoney.ru/e_download_se.htm 1.Install ArtMoney. 2.Open ArtMoney. 3.Go To Options. 4.Under The General Tab, Across From Show Processes, Use The Scroll Down Box And Click ALL. Now Thats All You Have To Do Setting Wise. 5.Open Maple Story. Important: For Those You Have Used The Old Bypass. Turn Off Prevx And Make Sure Your GameGuard Updates To The Newest Version. An Easy Way To Do This Is To Go To The nProtect Folder That You Put Those 3 Other Folders In And Just Delet Them. Or If You Want To Keep Them Then Just Rename A Folder. Example. GameGuard <---Rename Too---> ameGuard IMPORTANT: PICTURES HERE FOR THE FOLLOWING -BEING UPLOADED- 6.Once The GameGuard Logo Comes Up Click The Select Process Scrool Down Bar. (Picture 1) 7. Go To The Bottom And You Should See this---> (Picture 2) 8. Select C:/...MapleStory.exe (Picture 2) 9. Now Your Locked On To Maple. (Picture 3) So Let Maple Load Up. Log In. Go Somewhere Safe as Usually. 10.Press Alt+Tab 11. Go Back To ArtMoney. -------------------------------------------------------------------------------- Time For.....Umm Lets See. Something Simply To Start With. No Breath!!!!!!! Step 1 - Rigth Click C:/...MapleStory.exe > Click Memory Editor (Picture 4) Step 2 - Under The Section Moving. Click On The Scroll Down Box > Select Moving To Address (Picture 5) Step 3 - Now Youll See Under That A Address Box Comes Up With 00010000 In It. (Picture 6) Step 4 - Change That Address To 006C6174. (Picture 7) Step 5 - Click The Long Button With The ^ On It. this Well Bring You To The Address. (Picture 7) Step 6 - Now You'll See The Address Highligthed In Black. (Picture 7) Step 7- Now Rigth Click The Address> Click Add To Table. (Picture 8) Step 9 - Now Close The Memory Editor Window And Go Back To Mian Screen. You'll See This (Picture 9) Step 10 - Click Integer 2 Bytes. A Box Shall Appear. (Picture 10) Step 11 - Click The Arrow Down Button Next To Addess And Make It Pointer. (Picture 11) Step 12 - Since the Offset for No Breath Is 230. Put That In The Box Next To The No Breath Address. (Picture 12) Step 13 - Now Freeze It , Then Click OK. (Picture 13) Note: If You Want to Change The Description to No Breath. Go Ahead. Step 14 - Its Done. Go On Maple And Start Attacking. Then When You Stop, You Shoulding Be Breathing. You Should Be Standing Still. =D [Im Gone to Bed. Iv Been At This For 12 Hours. Its Early In The Mourning Here. Im On Vacation As Well If You Didnt Know Ill Be Working On Vac Tut And God And Everything Else When I Get In The Mourning. Sorry. But Im sure Youll Have A LOT Of Questions And Compliants Tommorrow Posted Here. So Ill Try And Awnser Them As Soon As I Get Up. Im Really Sorry About This. Good Nigth. ] Last edited by CJAnime; 22nd April 2006 at 02:55..

22nd April 2006, 19:16	#13
XxChaotiK__SouL xImmortal Dark Lord Join Date: 16th Apr 2006 Location: Channel 13, Bera, Maple Story Posts: 47	Thank you CJ, this is a lot easier than making your own Undetected CE, for those of us who look at that tutorial and think " How the hell... " and I thank you. About the Video tutorial. I think that is a great idea. A lot of people might find that to be quite a bit easier to follow. Not that pictures are not easy to follow as well. Great work, thanks a ton. --- Edit --- Problem, I have noticed some people are having the same problem as I am. No Breath does not work. I have redone the instructions 4 times now, and nothing. Maybe I am missing something, but I was pretty sure I followed the steps quite closely. The only thing I was wondering about, do you have to move first, because I just logged in and ALT Tabbed out because of where I am. __________________ The Darkness is coming. The Light is fading. The Darkness. Prepare. ¯†¯Xx©håøtïK__§øµ£xX¯†¯ Last edited by XxChaotiK__SouL; 22nd April 2006 at 20:11..

22nd April 2006, 00:45	#2
~~CJAnime~~ Banned by Admins Knight of Wars Join Date: 13th Apr 2006 Posts: 87	Im Going Ahead With Tutorial. Looks Like This Program Is All Over The Net. IV Been Getting A Lot Of Email About Memory View And Such So HIm Writing IT Agian

22nd April 2006, 00:51	#4
Pakikid Lord Join Date: 20th Apr 2006 Posts: 33	TY CJanime, it would be good to go forward with this tut because most of if not all of us except for you are stuck after opening the MapleStory.exe process.

22nd April 2006, 01:44	#6
~~CJAnime~~ Banned by Admins Knight of Wars Join Date: 13th Apr 2006 Posts: 87	I Just Got The Pics Up. the Ones In The Steps So Far. Now Im Writing Agian.

22nd April 2006, 02:11	#7
~~CJAnime~~ Banned by Admins Knight of Wars Join Date: 13th Apr 2006 Posts: 87	Remember. Im Doing This For You Guys. I Already Made A Undetected Program Like Cheat Engine That Iv Been Using Since Ver .12 Im Just Trying To Help You Fellow Maple Story Hackers Or Whatever You Want To Call It.

22nd April 2006, 03:03	#8
~~CJAnime~~ Banned by Admins Knight of Wars Join Date: 13th Apr 2006 Posts: 87	Thank You pika_gone_mad And bgnt (AKA The Guy In My Quote Who Got Banned) The Vac Is SUPER HARDER. And LONG. Yes You Can Do Unlimited Debuggers. Yes You Can Add Your Own Pointers. This Ill Show You all Tommorrow. And How About This. A VIDEO TUTORIAL!!!!!! I Can Make One. If You Guys Have Problems Getting It To Work And Having To Go Back And Forth To The Pictures. =D Nite.

22nd April 2006, 03:48	#9
godlyitems666 Magician Apprentice Join Date: 22nd Apr 2006 Posts: 12	thank you CJ took me a while but i got the no breath to work. cant wiat for vac

22nd April 2006, 19:12	#11
~~prodigyuwr~~ Permanently Banned War Titan Join Date: 11th Mar 2006 Posts: 216	has anyone actually gotten this to work...because I did it exactly how he said and it doesnt work for me

22nd April 2006, 19:15	#12
Sadsa Idk, bored. Lord of Destiny Join Date: 5th Apr 2006 Posts: 61	Hey CJ, thanks for giving this out to the public MPC even when you didn't need to, basically, you rule. :o Prod read the posts, so far several people have gotten it to work.

22nd April 2006, 19:25	#14
alex5000 Dark Mage Join Date: 3rd Apr 2006 Posts: 25	i think u did great work ony posting here the tut! but i hope u to post the values for god mode and more. ty a lot! (and i hope it to work for me too)

22nd April 2006, 19:26	#15
ZyforX Lord Join Date: 18th Oct 2005 Posts: 31	Maybe when CJAnime comes back, he can clarify some things for those of us who it will not work for. It seems some have had success, while others have failed.