[Uce FAQ/FIXES] ANSWERS TO COMMON COMPILE ERRORS!!

MonkeyBrains · 26th April 2006, 18:49

Okay I have recently been messing around with this whole making ce undetected bussiness and have gotten almost every error posible(and I fixed them all). so lucky for u noobs cause im gonna tell u how to fix all the ones i got along way(and some i didnt).......hopefully this will stop u all from spaming the forum with the same questions over and over again.

Q: omg FILE NOT FOUND what do i do???

A:go to top of page and try again,check ure spelling,and no not all the functions are listed in all 3 files so dont freak if u cant find "nop"(but plz make sure ure spelling is right or ull have erorrs later on)

Q: omg ddk says that my ce directory doest exist what do i do!?!?!

A: CHECK URE SPELLING!!!,also rember that if ce directory is for example "ccheat engine delphi" that it does have spaces, dont forget them spaces

.

Q: omg how do i compile?!?!?!?

A: 3 ways to compile once ure "done" 1. scroll to bottom of folder and find the "compile" file and dubble click. 2. open up ddk to ure ce directory and type "compile" 3. open up delphi and open the "cheatengine.dpr" file and press ctrl+F9.

Q: omg i compile but i cant find cheatengine.exe?!?!?

A: if u cant find an exe that means u screwed up somewhere so try compile with either ddk or delphi so u can see ure error msg

.

Q:omg i get an autoassmbler.pas(or any file other than the 3 u wern't suposed to edit) error but i never touched that file O_O?!?!?

A: go back and try again cause u screwed up O_O!!!

actually if u get those kind of error it means that u went over bard with ure orginal edditing. rember when changeing functins if it says "TProtectme" LEAVE IT ALONE but if u see "(darkbyte, 'Protectme' )" change it to "(darkbyte, 'poop6' )" get it? ONLY CHANGE WHATS IN QUOTES!!( i mean unless u want ot though every source file and change it there too). also rember if u see function OP or handle OP change it function poop2 and handle poop2.

Q: omg "trainer.res" file not found what do i do?!?!

A: u dont need it dont wory about it, u have ce now........not good enough??? okay fine! >_> go in ure ce directory find a file called cheatengine.dpr and open it with notepad and delete this line "{$R 'trainer.res' 'trainer.rc'}" problem solved now go away!!

Q: omg now iget this access violation 0000 popup when i open ce?!?!?!

A: ive only found two fixes for this if one doesnt work then try the other one. 1.copile ure dbk32.dll file.(if u dont know how to do that then move on to #2) 2.go into ure ce settings go into the "extras" tab and tick off EVERYTHING. now ure good and dandy

Q: okay i got everything done but now when i try to hack my pc restarts or my ce is detected by ms:'( waaaahhhh!!!!

A: the answer to this is simple if u used the tut floating on this forum u should know its for rev641 and the current GG for oms is rev714 so u need to get those strings on ure own or wait till they are leaked. if ure running msea hten ure tha sh!t since msea is at rev641 lucky u.

Q: omg how do i get those strings for 714 i need to hack O_O!?!?!?!

A: theres plenty of links and tuts floating around this forum and the ce forum but im too lazy to find them for u. google is good too try that

.

Now im done hope this helps .................and to all u flamers out theres yes ALOT of this has been posted b4 but its too scattered so i decided to make this lil faq.and no credits dont go to me answers were from both mpc and ce forums ...okay some are from me since i figured it out on my own but the tough ones like the trainer thing is all ce

p.s. NO i will not post links to the stuff u need. if ure too damb stupid/lazy to use the search button(or google) then u shouldn't even be reading my faq. since i wrote it assuming u have ddk,delphi,and the ce source files.....and yes begging is againts the mpc rules if diddle or gil see u they will ban u(mofo might just give u a warning hes more noob friendly).

shrams · 26th April 2006, 18:59

Lmao thanks for this. I like how you started every question with omg blah blah blah.

skk85 · 26th April 2006, 19:15

Good stuff.
thx for all the info.
im sure this would help in many cases.
when im ready to try again, that is...

vale · 27th April 2006, 00:14

Nice faq, glad you made this. Now everyone will have a place to look at and see if their question and answer is here. btw I suggest people post their question here so he can edit and post your question up.

bamban · 27th April 2006, 00:23

Thanks for answering the trainer.res question.

Wanna give a link to "those strings for 714"? The one's I find dont seem to work. ATM my CE compiles right and is undetecable but when I select my character my screen goes black and nothing happens. I'm assuming this is because some strings are detected ='(

MonkeyBrains · 27th April 2006, 01:17

Quote:

Originally Posted by vale

Nice faq, glad you made this. Now everyone will have a place to look at and see if their question and answer is here. btw I suggest people post their question here so he can edit and post your question up.

that sounds like great idea glad i thought of it

Quote:

Originally Posted by bamban

Thanks for answering the trainer.res question.

Wanna give a link to "those strings for 714"? The one's I find dont seem to work. ATM my CE compiles right and is undetecable but when I select my character my screen goes black and nothing happens. I'm assuming this is because some strings are detected ='(

sory mate no actual link to all the 714 strings partial list floating around this forum i think i saw it page 2 or 3.

bamban · 27th April 2006, 03:24

I'll try man, thanks. Though a full list would be pretty handy

farmerchum · 27th April 2006, 03:54

people should learn how to read the compiling error, it will tell you wat wrong with which file and what line the error occur.

~~doowstados~~ · 27th April 2006, 04:52

Very nice, but do you know what to do for dcc32 and upx errors?

mtaniguchi · 27th April 2006, 11:21

I like this info, what should i do with this problem

[Error]autoassembler.pas(652): Undeclared identifier: "Make Writable"

Ababa · 27th April 2006, 11:42

Quote:

Originally Posted by mtaniguchi

I like this info, what should i do with this problem

[Error]autoassembler.pas(652): Undeclared identifier: "Make Writable"

Open with notepad autoassembler.pas
Search for Make Writable and change it to YOUR "change38"

Dvol · 27th April 2006, 15:10

[error] CEFuncProc.pas(568): Identifier redeclared: 'hypermode'
and it highlights the line in CEFuncProc.pas hypermode: thypermode;
any ideas?

SunBeam · 27th April 2006, 16:03

You deleted hyperscan or something in the file that links the hyperscan.pas...

MonkeyBrains · 27th April 2006, 17:14

Quote:

Originally Posted by mtaniguchi

I like this info, what should i do with this problem

[Error]autoassembler.pas(652): Undeclared identifier: "Make Writable"

i asnwered this alredy >_> plz read b4 u start spamming my lil faq

Quote:

Originally Posted by MonkeyBrains

Q:omg i get an autoassmbler.pas(or any file other than the 3 u wer suposed ot edit) error but i never touched that file O_O?!?!?

A: go back and try again cause u screwed up O_O!!! actually if u get those kind of error it means that u went over bard with ure orginal edditing. rember when changeing functins if it says "TProtectme" LEAVE IT ALONE but if u see "(darkbyte, 'Protectme' )" change it to "(darkbyte, 'poop6' )" get it? ONLY CHANGE WHATS IN QUOTES!!( i mean unless u want ot though every source file and change it there too). also rember if u see function OP or handle OP change it function poop2 and handle poop2.

tru champion · 27th April 2006, 17:16

lol this faq will help ALOT of people nice job! i like the way u formed ur faq =]

26th April 2006, 18:49	#1
MonkeyBrains Lord Join Date: 24th Mar 2006 Posts: 37	[Uce FAQ/FIXES] ANSWERS TO COMMON COMPILE ERRORS!! Okay I have recently been messing around with this whole making ce undetected bussiness and have gotten almost every error posible(and I fixed them all). so lucky for u noobs cause im gonna tell u how to fix all the ones i got along way(and some i didnt).......hopefully this will stop u all from spaming the forum with the same questions over and over again. Q: omg FILE NOT FOUND what do i do??? A:go to top of page and try again,check ure spelling,and no not all the functions are listed in all 3 files so dont freak if u cant find "nop"(but plz make sure ure spelling is right or ull have erorrs later on) Q: omg ddk says that my ce directory doest exist what do i do!?!?! A: CHECK URE SPELLING!!!,also rember that if ce directory is for example "ccheat engine delphi" that it does have spaces, dont forget them spaces . Q: omg how do i compile?!?!?!? A: 3 ways to compile once ure "done" 1. scroll to bottom of folder and find the "compile" file and dubble click. 2. open up ddk to ure ce directory and type "compile" 3. open up delphi and open the "cheatengine.dpr" file and press ctrl+F9. Q: omg i compile but i cant find cheatengine.exe?!?!? A: if u cant find an exe that means u screwed up somewhere so try compile with either ddk or delphi so u can see ure error msg . Q:omg i get an autoassmbler.pas(or any file other than the 3 u wern't suposed to edit) error but i never touched that file O_O?!?!? A: go back and try again cause u screwed up O_O!!! actually if u get those kind of error it means that u went over bard with ure orginal edditing. rember when changeing functins if it says "TProtectme" LEAVE IT ALONE but if u see "(darkbyte, 'Protectme' )" change it to "(darkbyte, 'poop6' )" get it? ONLY CHANGE WHATS IN QUOTES!!( i mean unless u want ot though every source file and change it there too). also rember if u see function OP or handle OP change it function poop2 and handle poop2. Q: omg "trainer.res" file not found what do i do?!?! A: u dont need it dont wory about it, u have ce now........not good enough??? okay fine! >_> go in ure ce directory find a file called cheatengine.dpr and open it with notepad and delete this line "{$R 'trainer.res' 'trainer.rc'}" problem solved now go away!! Q: omg now iget this access violation 0000 popup when i open ce?!?!?! A: ive only found two fixes for this if one doesnt work then try the other one. 1.copile ure dbk32.dll file.(if u dont know how to do that then move on to #2) 2.go into ure ce settings go into the "extras" tab and tick off EVERYTHING. now ure good and dandy Q: okay i got everything done but now when i try to hack my pc restarts or my ce is detected by ms:'( waaaahhhh!!!! A: the answer to this is simple if u used the tut floating on this forum u should know its for rev641 and the current GG for oms is rev714 so u need to get those strings on ure own or wait till they are leaked. if ure running msea hten ure tha sh!t since msea is at rev641 lucky u. Q: omg how do i get those strings for 714 i need to hack O_O!?!?!?! A: theres plenty of links and tuts floating around this forum and the ce forum but im too lazy to find them for u. google is good too try that . Now im done hope this helps .................and to all u flamers out theres yes ALOT of this has been posted b4 but its too scattered so i decided to make this lil faq.and no credits dont go to me answers were from both mpc and ce forums ...okay some are from me since i figured it out on my own but the tough ones like the trainer thing is all ce p.s. NO i will not post links to the stuff u need. if ure too damb stupid/lazy to use the search button(or google) then u shouldn't even be reading my faq. since i wrote it assuming u have ddk,delphi,and the ce source files.....and yes begging is againts the mpc rules if diddle or gil see u they will ban u(mofo might just give u a warning hes more noob friendly). Last edited by MonkeyBrains; 7th May 2006 at 09:13..

27th April 2006, 03:24	#7
bamban Lord of Destiny Join Date: 18th Jan 2006 Posts: 60	I'll try man, thanks. Though a full list would be pretty handy Last edited by bamban; 27th April 2006 at 03:26..

27th April 2006, 16:03	#13
SunBeam Broken Shàdéh™ Apprentice God Join Date: 10th Jul 2004 Location: Romania Posts: 2,358	You deleted hyperscan or something in the file that links the hyperscan.pas... __________________ People are all the same, we only get judged by what we do. Personality reflects name, and if I'm ugly, then so are you...

26th April 2006, 18:59	#2
shrams Mage Join Date: 21st Apr 2006 Posts: 18	Lmao thanks for this. I like how you started every question with omg blah blah blah.

26th April 2006, 19:15	#3
skk85 A Trying N00BIE Lord of Destiny Join Date: 13th Apr 2006 Posts: 59	Good stuff. thx for all the info. im sure this would help in many cases. when im ready to try again, that is...

27th April 2006, 00:14	#4
vale Knight of Wars Join Date: 27th Feb 2006 Posts: 113	Nice faq, glad you made this. Now everyone will have a place to look at and see if their question and answer is here. btw I suggest people post their question here so he can edit and post your question up.

27th April 2006, 00:23	#5
bamban Lord of Destiny Join Date: 18th Jan 2006 Posts: 60	Thanks for answering the trainer.res question. Wanna give a link to "those strings for 714"? The one's I find dont seem to work. ATM my CE compiles right and is undetecable but when I select my character my screen goes black and nothing happens. I'm assuming this is because some strings are detected ='(

27th April 2006, 03:54	#8
farmerchum Member Of Elite7 Necromancer of the Light Join Date: 21st Dec 2004 Location: Australia Posts: 696	people should learn how to read the compiling error, it will tell you wat wrong with which file and what line the error occur.

27th April 2006, 04:52	#9
~~doowstados~~ Permanently Banned Devil of Hell Join Date: 22nd Apr 2006 Posts: 328	Very nice, but do you know what to do for dcc32 and upx errors?

27th April 2006, 11:21	#10
mtaniguchi Dark Mage Join Date: 16th Mar 2006 Posts: 22	I like this info, what should i do with this problem [Error]autoassembler.pas(652): Undeclared identifier: "Make Writable"

27th April 2006, 15:10	#12
Dvol Mage Join Date: 4th Nov 2005 Posts: 16	[error] CEFuncProc.pas(568): Identifier redeclared: 'hypermode' and it highlights the line in CEFuncProc.pas hypermode: thypermode; any ideas?

27th April 2006, 17:16	#15
tru champion Lord Join Date: 20th Apr 2006 Posts: 34	lol this faq will help ALOT of people nice job! i like the way u formed ur faq =]