[Release] MSPro v3

Opcode&H90 · 26th May 2006, 10:14

Third and final release.

[Updates]
1. Added Focus Check. It will automatically turns off all the macro when MapleStory is not focused. (eg. Alt-Tab out of the game)
2. Updated interprocess communication. Now you can change the hotkeys after the game is loaded. (Note: This doesnt means you can load MSPro after the game has been loaded. It wont hook)
3. Re-make the auto potion. This should work for GMS now.
4. A mistake pointed out by TiMBuS. Credits goes to him.

5. Added a very simple stealth.

[Instruction]
1. Open up MSPro first.
2. Hover your mouse over the program. The window will open up and you can configure it to suit your taste.
3. Press Save after that.
4. Now open up MapleStory.
5. The status now should be Ready! Enjoy! / Maple Story on focus / Lost Focus. If you dont have any of these, then MSPro isnt working.

[Auto Potion]
1. The first (left) combo box is the hotkey to trigger Auto Potion while the right combo box is the potion key (the key to press when your HP/MP is low)
2. You can see the same help when you hover your mouse over the combo box.
3. The scroll bar below specifies when to trigger Auto Potion. (eg. if you put 50% and your full HP/MP is 100, when your HP/MP goes below 50, then the potion key will be pressed)
4. Refrain from putting the alarm more than 90%. It will waste your potion (since the potion heals more than your full HP/MP) or may cause other problems.
5. For some reasons, INSERT key wont work. Replace it with other keys instead.

[AC Rate]
1. This time I included a simple AC rate tester.
2. Get your MSPro and MapleStory running.
3. Alt-Tab out of the game.
4. Load up TestPad.exe
5. Hover your mouse over the test pad.
6. Toggle Auto Clicker.
7. The AC rate will be shown on the caption.
8. Note: However high your AC rate is, it doesnt imply that you will get in PQ for sure. PQ depends largely on your connection speed and your overall distance from the server.

[Auto Text]
Some people still doesnt understand how it works.

- Type a at the chat then ENTER.
- Type ab then ENTER.
- Type abc then ENTER again.
- Press UP arrow key 3 times. You should see an "a" in the chat.
- Then press ENTER.
- Toggle auto-text.
- Now you should see the chat is typing on its own. (on 1 second interval)

[Windowed Mode]
1. d3d8.dll Windowed mode is patched. Dont tick Windowed Mode. You will get a "Hack Detected" message if you do. (leaving it there for other reasons)
2. Use DXWnd instead. (nope, DXWnd is still working right)

[Status]
1. MSEA v30, GameGuard rev 740 (WinXP SP2)
- Working. Still working.
2. GMS v23, GameGuard rev 740
- Confirmed to be working.

Please post all your question and result here. Dont PM me for that.

As usual, if you having any problems, please include the following details. State your question in detail. (eg. what you did before you are having problems)
OS version: Win XP SP2/SP1/any alien OS
MS version: GMS/MSEA/JMS/whatever... + version 30/??
GameGuard revision: your current GameGuard revision number (if you dont know this, bang your head on the wall, it might help, lol)
Other: Anything you think it might help. (eg. screenshot of error messages)

For those who got it working, please kindly post the details above too.

dopeySteve · 26th May 2006, 10:53

OMS game rev 740 ill test when mod approvel the thread last mSPRo v2 didn't work the auto pot = = and auto mp pot = =

LOLRAZERRUBBER · 26th May 2006, 10:53

READ THE RULE NEXT TIME !~

Quote:

When will it be approve?

Wait for the mod to scan the file if it is okay than u may download it

Dioragry · 26th May 2006, 10:53

just be patient and wait for some mod to come into this topic

DarkendsLy · 26th May 2006, 11:12

so will this version of mspro have a working auto pot function in it cuz if it dosent have it then i'll stay with mspro2

dotless · 26th May 2006, 11:15

hey,just wondering,
you dont need to bypass to use this is it?

PissAndMoan · 26th May 2006, 11:19

nice, works for msea rite?

does the autopot work? cos i rmb msprov2 autopot doenst work.

and does it nid a bypass?

SanderNL · 26th May 2006, 11:19

Quote:

Originally Posted by dotless

hey,just wondering,
you dont need to bypass to use this is it?

Nope, no bypass needed!

PissAndMoan · 26th May 2006, 11:21

Quote:

Originally Posted by SanderNL

Nope, no bypass needed!

alright!

dotless · 26th May 2006, 11:25

haha cool..thanks..
any idea how to use the Dxwnd.
i tried but still couldnt window it.

DarkendsLy · 26th May 2006, 11:28

dose this version have the option to run window mode cuz i think if you dont have that pick...then maybe i can't run these on a DXWnd be cuz from my last post on the release of mspro ver2..
i stated a salution for the mspro program to work with the DXWnd so i was just wondering......

MyName15 · 26th May 2006, 12:32

Opcode&H90 can u give me the source code??

hydepark · 26th May 2006, 12:37

ANOUNCEMENT FOR THE N00BS OUT HERE:

Just wait for an mod to approve this file, just wait a few hours and u can use it.

Thanks in advance

~ Hydepark

asp · 26th May 2006, 13:17

I reported thread to trya nd speed up process. Reported and told them to come to approve!^^ <3 Just because so many people want this approved quickly...

cjjjj · 26th May 2006, 14:28

SUGGESTION : may MSPro 4 add in AUTO SKILL which can set the timer for some skill like booster,meditattion.......????

26th May 2006, 10:53	#2
dopeySteve Lord Join Date: 27th Mar 2006 Posts: 38	OMS game rev 740 ill test when mod approvel the thread last mSPRo v2 didn't work the auto pot = = and auto mp pot = = __________________ http://img196.imageshack.us/img196/7155/sigdopey0qd.jpg

26th May 2006, 12:37	#13
hydepark Lord of Destiny Join Date: 28th Mar 2006 Posts: 52	ANOUNCEMENT FOR THE N00BS OUT HERE: Just wait for an mod to approve this file, just wait a few hours and u can use it. Thanks in advance ~ Hydepark __________________ [ Sig removed: Size exceeded limits described in the MPC Rules ]

26th May 2006, 13:17	#14
asp Flawed Design Knight of Wars Join Date: 27th Mar 2006 Location: On Cherry Lane with the Muffin Man!^^ Posts: 115	I reported thread to trya nd speed up process. Reported and told them to come to approve!^^ <3 Just because so many people want this approved quickly... __________________ 'Cuz I lie, not because I want to, but I seem to need to all the time. Yeah, I lie and I don't even know it. Maybe this is all a part of my flawed design... ~FLAWED DESIGN by Stabilo (Song of the Week)

26th May 2006, 10:53	#4
Dioragry Apprentice Knight Join Date: 9th Feb 2006 Posts: 76	just be patient and wait for some mod to come into this topic

26th May 2006, 11:12	#5
DarkendsLy demented user Lord Join Date: 20th May 2006 Location: hawaii Posts: 37	so will this version of mspro have a working auto pot function in it cuz if it dosent have it then i'll stay with mspro2

26th May 2006, 11:15	#6
dotless Lord of Destiny Join Date: 27th Dec 2005 Posts: 57	hey,just wondering, you dont need to bypass to use this is it?

26th May 2006, 11:19	#7
PissAndMoan Mage Join Date: 2nd May 2006 Posts: 15	nice, works for msea rite? does the autopot work? cos i rmb msprov2 autopot doenst work. and does it nid a bypass?

26th May 2006, 11:25	#10
dotless Lord of Destiny Join Date: 27th Dec 2005 Posts: 57	haha cool..thanks.. any idea how to use the Dxwnd. i tried but still couldnt window it.

26th May 2006, 11:28	#11
DarkendsLy demented user Lord Join Date: 20th May 2006 Location: hawaii Posts: 37	dose this version have the option to run window mode cuz i think if you dont have that pick...then maybe i can't run these on a DXWnd be cuz from my last post on the release of mspro ver2.. i stated a salution for the mspro program to work with the DXWnd so i was just wondering......

26th May 2006, 12:32	#12
MyName15 Dark Mage Join Date: 1st Apr 2006 Posts: 26	Opcode&H90 can u give me the source code??

26th May 2006, 14:28	#15
cjjjj New MPC User Join Date: 20th May 2006 Posts: 4	SUGGESTION : may MSPro 4 add in AUTO SKILL which can set the timer for some skill like booster,meditattion.......????