[Tut] Speed hack + Jump hack fast

lanhowee · 31st May 2006, 04:51

This simple tutorial will guide enable you to do speed hack and jump hack fast
and it doesnt need auto assembler =P

THIS IS FOR OMS / GMS ONLY. IT IS NOT FOR JMS OR MAPLESEA.

Ok first we'll go with speed hack:

To change the speed, we have to find the code for speed which i have already done for you =P But you can't just change the speed...why? Because if we change it, the things it tells the game and receives stuffs up. =P

1. Go to Memory view and go to the address - 400308. (This is a random codecave and you can take anyother, i chose this cos it was easy to remember =P)

2. Now on the side where it says : -add [eax], al - double click it and replace it with this code: fmul qword ptr [400330] ( This is to refer to 400330 (your own speed) when you access the real speed address. ) Now when it asks for your NOP thing click yes.

3. Underneath 400308 and where it says -add [eax], al - double click it and replace it with this code: jmp 005eea52. (This is refer to the one below our real speeding address) Again when it asks for your NOP thing click yes.

4. Now go to 5EEA4C in memory view and change the EIP to 400308 so that it also refers to your own speed code.

5. Now quit memory view and add address manually in your CE. Add 400330 in double and when you finish it is on 0. I swear DON'T move in MS or you might D/C. Now change it higher to faster. The default speed is 125. Higher goes faster. =P

6. Walah!

-------------------------------------------------------------------------------------------------------

Jump hack

1. You know how it works from speed hack so ill just go straight with telling you. Go to 4001C5 in mem view and change the -add [eax], al - to fmul qword ptr [4001Ed] and when it asks for NOP click yes

2. Below 4001C5, where it says add [eax], al - replace it with jmp 005ee7DB. When it asks for NOP press yes.

3. Now go to 5EE7D5 in mem view and change EIP to 4001C5.

4. Add 4001ED as a double to CE . The lower it is the higher the jump. The default jump is -555 so lower than that goes higher.

------------------------------------------------------------------------------------------------------

Ty to Sunbeam for your code-caving tuts and ty to team-hp.com.

Your MPC forum helper - Lanhowee =P

P.S if you want the auto assembler code PM me...

ch00bz · 31st May 2006, 05:11

Is this server sided or cilent sided?? cause if ppl see you go so fast and jump so high, itz pretty obvious that your hacking..

lanhowee · 31st May 2006, 05:13

its serversided...

ch00bz · 31st May 2006, 05:53

kk ty...that gives me some reason to try it..

lamifox · 31st May 2006, 06:24

This IS the long way of doing jump/speed, or the original way. lol.

toaders23 · 31st May 2006, 06:45

I tried it, but when I tick EIP it disconnects me... any reason why?

k17 · 31st May 2006, 07:15

nice tut..well explained

Kayoed · 31st May 2006, 10:46

lanh cani have the auto assembler code please, cheers

BoBaafe · 31st May 2006, 11:19

can u pm me the auto assembler code as well? thanks in advance.
I also was disconnected after i ticked eip and entered my code.. this seems to always happen when i do this speed code ive tried every form of it i always get kicked when ticking the eip i do everything right too!

~~Luky Jay~~ · 31st May 2006, 11:49

Its not that good tho because you cant use this and many other hacks becasue most people only have a limit of 4 debuggers.

BoBaafe · 31st May 2006, 12:16

I am wondering ive been reading up on all these hacks and UCE temp and just UCE i have temp i understand that temp most vacs dont work, but i thought i could get this speed hack to work is it possible or am i wasting my time and i need a UCE cuz this temp engine is getting annoying but i really dont want to have to set up a UCE i only wana get this speed hack to work if it can be done with temp thats fine for me please help me out!

31st May 2006, 04:51	#1
lanhowee ~Itachi ~ Apprentice Knight Join Date: 12th Feb 2006 Location: Far away in a kingdom called Hackatopia Posts: 91	[Tut] Speed hack + Jump hack fast This simple tutorial will guide enable you to do speed hack and jump hack fast and it doesnt need auto assembler =P THIS IS FOR OMS / GMS ONLY. IT IS NOT FOR JMS OR MAPLESEA. Ok first we'll go with speed hack: To change the speed, we have to find the code for speed which i have already done for you =P But you can't just change the speed...why? Because if we change it, the things it tells the game and receives stuffs up. =P 1. Go to Memory view and go to the address - 400308. (This is a random codecave and you can take anyother, i chose this cos it was easy to remember =P) 2. Now on the side where it says : -add [eax], al - double click it and replace it with this code: fmul qword ptr [400330] ( This is to refer to 400330 (your own speed) when you access the real speed address. ) Now when it asks for your NOP thing click yes. 3. Underneath 400308 and where it says -add [eax], al - double click it and replace it with this code: jmp 005eea52. (This is refer to the one below our real speeding address) Again when it asks for your NOP thing click yes. 4. Now go to 5EEA4C in memory view and change the EIP to 400308 so that it also refers to your own speed code. 5. Now quit memory view and add address manually in your CE. Add 400330 in double and when you finish it is on 0. I swear DON'T move in MS or you might D/C. Now change it higher to faster. The default speed is 125. Higher goes faster. =P 6. Walah! ------------------------------------------------------------------------------------------------------- Jump hack 1. You know how it works from speed hack so ill just go straight with telling you. Go to 4001C5 in mem view and change the -add [eax], al - to fmul qword ptr [4001Ed] and when it asks for NOP click yes 2. Below 4001C5, where it says add [eax], al - replace it with jmp 005ee7DB. When it asks for NOP press yes. 3. Now go to 5EE7D5 in mem view and change EIP to 4001C5. 4. Add 4001ED as a double to CE . The lower it is the higher the jump. The default jump is -555 so lower than that goes higher. ------------------------------------------------------------------------------------------------------ Ty to Sunbeam for your code-caving tuts and ty to team-hp.com. Your MPC forum helper - Lanhowee =P P.S if you want the auto assembler code PM me... __________________ Itachi pwnz ~ end of sig

31st May 2006, 05:11	#2
ch00bz Legit Hacker Apprentice Knight Join Date: 2nd Apr 2006 Posts: 95	Is this server sided or cilent sided?? cause if ppl see you go so fast and jump so high, itz pretty obvious that your hacking.. __________________ Pwnage is the Way to Play I'm Bored

31st May 2006, 05:13	#3
lanhowee ~Itachi ~ Apprentice Knight Join Date: 12th Feb 2006 Location: Far away in a kingdom called Hackatopia Posts: 91	its serversided... __________________ Itachi pwnz ~ end of sig

31st May 2006, 05:53	#4
ch00bz Legit Hacker Apprentice Knight Join Date: 2nd Apr 2006 Posts: 95	kk ty...that gives me some reason to try it.. __________________ Pwnage is the Way to Play I'm Bored

31st May 2006, 06:24	#5
lamifox Lord of Destiny Join Date: 8th Jan 2005 Posts: 74	This IS the long way of doing jump/speed, or the original way. lol.

31st May 2006, 06:45	#6
toaders23 Mage Join Date: 21st Apr 2006 Posts: 18	I tried it, but when I tick EIP it disconnects me... any reason why?

31st May 2006, 07:15	#7
k17 Magician Apprentice Join Date: 21st Apr 2006 Posts: 14	nice tut..well explained

31st May 2006, 10:46	#8
Kayoed Mage Join Date: 24th Apr 2006 Posts: 19	lanh cani have the auto assembler code please, cheers

31st May 2006, 11:19	#9
BoBaafe New MPC User Join Date: 5th Apr 2006 Posts: 4	can u pm me the auto assembler code as well? thanks in advance. I also was disconnected after i ticked eip and entered my code.. this seems to always happen when i do this speed code ive tried every form of it i always get kicked when ticking the eip i do everything right too!

31st May 2006, 11:49	#10
~~Luky Jay~~ Banned by Admins Silent Killer Join Date: 4th Mar 2006 Posts: 427	Its not that good tho because you cant use this and many other hacks becasue most people only have a limit of 4 debuggers.

31st May 2006, 12:16	#11
BoBaafe New MPC User Join Date: 5th Apr 2006 Posts: 4	I am wondering ive been reading up on all these hacks and UCE temp and just UCE i have temp i understand that temp most vacs dont work, but i thought i could get this speed hack to work is it possible or am i wasting my time and i need a UCE cuz this temp engine is getting annoying but i really dont want to have to set up a UCE i only wana get this speed hack to work if it can be done with temp thats fine for me please help me out!